Mechanical |
Format |
Standard profile, half length, 1-lane PCI Express card |
Dimensions |
PCB L X H: 167.65 mm x 111.15 mm, 6.6 in x 4.38 in |
Weight |
135 g, 4.76 oz |
Host bus |
Standard |
PCI Express 1.0 |
Link width |
1 lane |
Link speed |
2.5 GT/s (PCIe 1.0) |
DMA |
32-bit |
Peak delivery bandwidth |
256 MB/s |
Effective (sustained) delivery bandwidth |
180 MB/s (Host PC motherboard dependent) |
Power consumption |
Typ. 8.3 W (940 mA @ +3.3V, 430 mA @ +12V), excluding I/O power output |
Camera / video inputs |
Interface standard(s) |
Non-standard Analog |
Connectors |
- CAMERAS: high-density sub-D 44-pin male connector for video and camera control
- Internal video: 10-pin shrouded header video connector on the PCB
|
Termination resistor |
Selectable by software |
Number of cameras |
Four single-tap cameras |
Number of cameras (at full frame rate) |
4 |
A/D converter |
Four, 10-bit, 65 MHz |
Maximum camera line rate |
52.5 kHz |
On-board processing |
On-board memory |
64 MB (32 MB for image data) |
Input LUT (Lookup Table) |
4 x 8- or 10-bit LUT |
General Purpose Inputs and Outputs |
Number of lines |
32 I/O lines:
- 4 contact inputs (Factory I/O: IN)
- 12 relay outputs (Factory I/O: OUT)
- 4 TTL inputs/outputs (System: IO)
- 4 differential inputs (System: TR)
- 4 opto-isolated outputs (System: ST)
- 4 full-duplex serial com ports (Camera COM: RX/TX)
|
Connectors |
- EXTERNAL SYSTEM: 26-pin high-density male sub-D connector on the bracket
- INTERNAL SYSTEM: 26-pin dual-row 0.1" shrouded header on the PCB
- FACTORY I/O: 34-pin dual-row 0.1" shrouded header on the PCB
- CAMERA COM: 16-pin dual-row 0.1" shrouded header on the PCB
- Molex 4-pin connector on the PCB for powering cameras
|
Usage |
- Camera and image acquisition trigger
- Light strobe trigger
- General purpose IO
|
Electrical specifications |
- TR: Inputs compatible with TTL, LVTTL, differential LVDS, differential RS-422, differential RS-485 signals, protected against electrostatic discharge, with choke for the rejection of common-mode noise
- ST: Opto-isolated outputs, compatible with signals up to 60V, with 3 µs fall time, isolated up to 500V
- IO: Inputs or outputs compatible with TTL signals, protected against electrostatic discharge, with high-frequency noise filter
- IN: Polarity-free inputs, compatible with TTL, 12V and 24V signals, opto-couplers, relays and switches
- OUT: Opto-isolated potential-free and polarity-free solid-state outputs, compatible with signals up to 30V, with 4 µs fall time, isolated up to 500V
- COM: RS232 asynchronous serial communication lines to control the cameras (exposed to the OS as standard COM ports)
|
Software |
Host PC Operating System |
- Microsoft Windows 10, 8.1, 7 for x86 (32-bit) and x86-64 (64-bit) processor architectures
- Linux for x86 (32-bit) and x86-64 (64-bit) processor architectures
Refer to release notes for details
|
APIs |
- MultiCam 32- and 64-bit binary libraries (Windows and Linux), for ISO-compliant C/C++ compilers
|
Environmental conditions |
Operating ambient air temperature |
0 °C to +50 °C / +32 °F to +122 °F |
Operating ambient air humidity |
10% to 90% RH non-condensing |
Storage ambient air temperature |
-20 °C to +70 °C/ -4 °F to +158 °F |
Storage ambient air humidity |
10% to 90% RH non-condensing |
Certifications |
Electromagnetic - EMC standards |
- European Council EMC Directive 2004/108/EC
|
EMC - Emission |
|
EMC - Immunity |
|
KC Certification |
Korean Radio Waves Act, Article 58-2, Clause 3 |
Flammability |
PCB compliant with UL 94 V-0 |
RoHS |
European Union Directive 2015/863 (ROHS3) |
REACH |
European Union Regulation 1907/2006 |
WEEE |
Must be disposed of separately from normal household waste and must be recycled according to local regulations |
Ordering Information |
Product code - Description |
|
Optional accessories |
|