Domino 시리즈

비표준 아날로그 카메라용 프레임 그래버

At a glance
  • 비표준 아날로그 카메라용 PCI/PCIe 프레임 그래버
  • 고정밀 10비트, 40/65 MHz A/D 컨버터
  • 극도로 낮은 동기화 지터를 제공하는 D³ 기술
  • 메가 픽셀 프로그레시브 스캔 및 인터레이스 카메라, 비동기 재설정 및 노출 제어
  • 트리거, 스트로보, 범용 I/O 라인
 
Domino Melody

단일 탭 비표준 아날로그 카메라용 로우 프로파일 프레임 그래버

 
Domino Harmony

단일 탭 2대 또는 RGB 비표준 아날로그 카메라 1대용 프레임 그래버

 
Domino Symphony PCIe

단일 탭 비표준 아날로그 카메라 4대용 프레임 그래버

저가형 아날로그 카메라에서 디지털 품질을 실현하는 Euresys의 특허 기술, D³ 기술
저가형 아날로그 카메라에서 디지털 품질을 실현하는 Euresys의 특허 기술, D³ 기술

  • 극도로 낮은 노이즈, 트루 10비트 이미지 캡처
  • 가장 낮은 지터: 컴포지트 비디오 신호를 사용할 때에도 가장 정밀한 측정이 가능한 0.5ns(또는 0.008 픽셀) 제공
  • 픽셀 클럭 사용 불필요


시판되는 카메라 중 가장 저렴한 산업용 카메라 활용 가능
시판되는 카메라 중 가장 저렴한 산업용 카메라 활용 가능


Windows 및 Linux 드라이버 제공
Windows 및 Linux 드라이버 제공


목록에서 선택한 제품 비교
 
제품 선택
제품 선택
제품 선택
Mechanical
Form Factor
PCI card
PCI card
PCI Express card
Format
Low profile, half-length, 32-bit Conventional PCI card
Standard profile, half-length, 64-bit Conventional PCI card
Standard profile, half length, 1-lane PCI Express card
Dimensions
L 168 mm x H 64 mm L 6.6 in x H 2.21 in
L 168 mm x H 107 mm L 6.6 in x H 3.87 in
L 167.65 mm x H 111.15 mm L 6.6 in x H 4.38 in
Weight
-
-
135 g, 4.76 oz
Host bus
Standard
PCI 32-bit, 33 MHz, 3.3 V and 5 V signaling
PCI 64-bit, 66 MHz, 3.3 V and 5 V signaling
PCI Express 1.0
Link width
-
-
1 lane
Link speed
-
-
2.5 GT/s (PCIe 1.0)
DMA
32-bit
32-bit
32-bit
Peak delivery bandwidth
132 MB/s
-
256 MB/s
Effective (sustained) delivery bandwidth
90 MB/s (Host PC motherboard dependent)
240 MB/s (Host PC motherboard dependent)
180 MB/s (Host PC motherboard dependent)
Power consumption
Max. 6.8 W (1.45 A @ +3.3V, 400 mA @ +5V), excluding I/O power output
Max. 6.8 W (1.45 A @ +3.3V, 400 mA @ +5V), excluding I/O power output
Typ. 8.3 W (940 mA @ +3.3V, 430 mA @ +12V), excluding I/O power output
Camera / video inputs
Interface standard(s)
Non-standard Analog
Non-standard Analog
Non-standard Analog
Connectors
  • CAMERA: high-density sub-D 15-pin male connector on the bracket
  • Camera internal: 10-pin shrouded header video connector on the PCB
  • CAMERA X: high-density sub-D 15-pin male connector for video and camera control
  • Camera Y: high-density sub-D 15-pin male connector for video and camera control
  • Video internal: 10-pin shrouded header video connector on the PCB
  • CAMERAS: high-density sub-D 44-pin male connector for video and camera control
  • Internal video: 10-pin shrouded header video connector on the PCB
Termination resistor
Selectable by software
Selectable by software
Selectable by software
Number of cameras
One single-tap camera
  • One or two single-tap cameras
  • One RGB camera
Four single-tap cameras
Number of cameras (at full frame rate)
1
2
4
Line-scan cameras supported
No
No
No
A/D converter
One, 10-bit, 40 MHz
Three, 10-bit, 40 MHz
Four, 10-bit, 65 MHz
Maximum camera line rate
  • 49.5 kHz in synchronous mode
  • 31.5 kHz in asynchronous reset mode
  • 49.5 kHz in synchronous mode
  • 31.5 kHz in asynchronous reset mode
52.5 kHz
On-board processing
On-board memory
16 MB (8 MB for image data)
64 MB (32 MB for image data)
64 MB (32 MB for image data)
Input LUT (Lookup Table)
1 x 8- or 10-bit LUT
-
4 x 8- or 10-bit LUT
General Purpose Inputs and Outputs
Number of lines
4 I/O lines:
  • 1 differential input (TR)
  • 1 opto-isolated output (ST)
  • 2 TTL inputs/outputs (ENHANCED IO)
8 I/O lines:
  • 2 differential inputs (TRX, TRY)
  • 2 opto-isolated outputs (STX, STY)
  • 4 TTL inputs/outputs (ENHANCED IO1..4)
32 I/O lines:
  • 4 contact inputs (Factory I/O: IN)
  • 12 relay outputs (Factory I/O: OUT)
  • 4 TTL inputs/outputs (System: IO)
  • 4 differential inputs (System: TR)
  • 4 opto-isolated outputs (System: ST)
  • 4 full-duplex serial com ports (Camera COM: RX/TX)
Connectors
  • SYSTEM: 8-pin RJ-45 connector on the bracket
  • SYSTEM INTERNAL: 10-pin dual-row 0.1" shrouded header on the PCB
  • CAMERA POWER: 4-pin Molex connector on the PCB for camera powering
  • SYSTEM: 15-pin male sub-D connector on the bracket
  • SYSTEM INTERNAL: 16-pin shrouded header on the PCB
  • POWER: Molex 4-pin connector on the PCB for camera powering
  • EXTERNAL SYSTEM: 26-pin high-density male sub-D connector on the bracket
  • INTERNAL SYSTEM: 26-pin dual-row 0.1" shrouded header on the PCB
  • FACTORY I/O: 34-pin dual-row 0.1" shrouded header on the PCB
  • CAMERA COM: 16-pin dual-row 0.1" shrouded header on the PCB
  • Molex 4-pin connector on the PCB for powering cameras
Usage
  • Camera and image acquisition trigger
  • Light strobe trigger
  • General purpose IO
  • Camera and image acquisition trigger
  • Light strobe trigger
  • General purpose IO
  • Camera and image acquisition trigger
  • Light strobe trigger
  • General purpose IO
Electrical specifications
  • TR: Inputs compatible with TTL, LVTTL, differential LVDS, differential RS-422, differential RS-485 signals, protected against electrostatic discharge, with choke for the rejection of common-mode noise
  • ST: Opto-isolated outputs, compatible with signals up to 60V, with 3 µs fall time, isolated up to 500V
  • ENHANCED IO Inputs or outputs compatible with TTL signals, protected against electrostatic discharge, with high-frequency noise filter
  • TRX, TRY: Inputs compatible with TTL, LVTTL, differential LVDS, differential RS-422, differential RS-485 signals, protected against electrostatic discharge, with choke for the rejection of common-mode noise
  • STX, STY: Opto-isolated outputs, compatible with signals up to 60V, with 3 µs fall time, isolated up to 500V
  • IO: TTL inputs or outputs
  • TR: Inputs compatible with TTL, LVTTL, differential LVDS, differential RS-422, differential RS-485 signals, protected against electrostatic discharge, with choke for the rejection of common-mode noise
  • ST: Opto-isolated outputs, compatible with signals up to 60V, with 3 µs fall time, isolated up to 500V
  • IO: Inputs or outputs compatible with TTL signals, protected against electrostatic discharge, with high-frequency noise filter
  • IN: Polarity-free inputs, compatible with TTL, 12V and 24V signals, opto-couplers, relays and switches
  • OUT: Opto-isolated potential-free and polarity-free solid-state outputs, compatible with signals up to 30V, with 4 µs fall time, isolated up to 500V
  • COM: RS232 asynchronous serial communication lines to control the cameras (exposed to the OS as standard COM ports)
Software
Host PC Operating System
  • Microsoft Windows 10, 8.1, 8, 7 for x86 (32-bit) and x86-64 (64-bit) processor architectures
  • Linux, from kernel version 2.6 to 4.13, compatible with a wide range of distributions, for x86 (32-bit) and x86-64 (64-bit) processor architectures
  • Microsoft Windows 10, 8.1, 8, 7 for x86 (32-bit) and x86-64 (64-bit) processor architectures
  • Linux, from kernel version 2.6 to 4.13, compatible with a wide range of distributions, for x86 (32-bit) and x86-64 (64-bit) processor architectures
  • Microsoft Windows 10, 8.1, 8, 7 for x86 (32-bit) and x86-64 (64-bit) processor architectures
  • Linux, from kernel version 2.6 to 4.13, compatible with a wide range of distributions, for x86 (32-bit) and x86-64 (64-bit) processor architectures
APIs
  • MultiCam 32- and 64-bit binary libraries (Windows and Linux), for ISO-compliant C/C++ compilers
  • MultiCam 32- and 64-bit binary libraries (Windows and Linux), for ISO-compliant C/C++ compilers
  • MultiCam 32- and 64-bit binary libraries (Windows and Linux), for ISO-compliant C/C++ compilers
Environmental conditions
Operating ambient air temperature
0 to +50 °C / +32 to +122 °F
0 to +50 °C / +32 to +122 °F
0 to +50 °C / +32 to +122 °F
Operating ambient air humidity
10 to 90% RH non-condensing
10 to 90% RH non-condensing
10 to 90% RH non-condensing
Storage ambient air temperature
-20 to +70 °C / -4 to +158 °F
-20 to +70 °C / -4 to +158 °F
-20 to +70 °C / -4 to +158 °F
Storage ambient air humidity
10 to 90% RH non-condensing
10 to 90% RH non-condensing
10 to 90% RH non-condensing
Certifications
Electromagnetic - EMC standards
  • European Council EMC Directive 2004/108/EC
  • United States FCC rule 47 CFR 15
  • European Council EMC Directive 2004/108/EC
  • United States FCC rule 47 CFR 15
  • European Council EMC Directive 2004/108/EC
EMC - Emission
  • EN 55022:2010 Class B
  • FCC 47 Part 15 Class B
  • EN 55022:2010 Class B
  • FCC 47 Part 15 Class B
  • EN 55022:2010 Class B
EMC - Immunity
  • EN 55024:2010 Class B
  • EN 61000-4-2
  • EN 61000-4-3
  • EN 61000-4-4
  • EN 55024:2010 Class B
  • EN 61000-4-2
  • EN 61000-4-3
  • EN 61000-4-4
  • EN 55024:2010 Class B
Flammability
PCB compliant with UL 94 V-0
PCB compliant with UL 94 V-0
PCB compliant with UL 94 V-0
RoHS
European Union Directive 2011/65/EU (ROHS2)
European Union Directive 2011/65/EU (ROHS2)
European Union Directive 2011/65/EU (ROHS2)
REACH
European Union Regulation 1907/2006
European Union Regulation 1907/2006
European Union Regulation 1907/2006
WEEE
Must be disposed of separately from normal household waste and must be recycled according to local regulations
Must be disposed of separately from normal household waste and must be recycled according to local regulations
Must be disposed of separately from normal household waste and must be recycled according to local regulations
Ordering Information
Optional accessories
LC Acquisition

검사 기계용으로 산업용 아날로그 카메라에서 저비용 이미지 캡처

Domino 및 Picolo 시리즈 카드로 시판되는 가장 저렴한 산업용 카메라를 활용할 수 있습니다.