| Mechanical |
| Format |
Low profile, half-length, 32-bit Conventional PCI card |
| Dimensions |
L 168 mm x H 64 mm
L 6.6 in x H 2.21 in |
| Host bus |
| Standard |
PCI 32-bit, 33 MHz, 3.3 V and 5 V signaling |
| DMA |
32-bit |
| Peak delivery bandwidth |
132 MB/s |
| Effective (sustained) delivery bandwidth |
90 MB/s (Host PC motherboard dependent) |
| Power consumption |
Max. 6.8 W (1.45 A @ +3.3V, 400 mA @ +5V), excluding I/O power output |
| Camera / video inputs |
| Interface standard(s) |
Non-standard Analog |
| Connectors |
- CAMERA: high-density sub-D 15-pin male connector on the bracket
- Camera internal: 10-pin shrouded header video connector on the PCB
|
| Termination resistor |
Selectable by software |
| Number of cameras |
One single-tap camera |
| Number of cameras (at full frame rate) |
1 |
| A/D converter |
One, 10-bit, 40 MHz |
| Maximum camera line rate |
- 49.5 kHz in synchronous mode
- 31.5 kHz in asynchronous reset mode
|
| On-board processing |
| On-board memory |
16 MB (8 MB for image data) |
| Input LUT (Lookup Table) |
1 x 8- or 10-bit LUT |
| General Purpose Inputs and Outputs |
| Number of lines |
4 I/O lines:
- 1 differential input (TR)
- 1 opto-isolated output (ST)
- 2 TTL inputs/outputs (ENHANCED IO)
|
| Connectors |
- SYSTEM: 8-pin RJ-45 connector on the bracket
- SYSTEM INTERNAL: 10-pin dual-row 0.1" shrouded header on the PCB
- CAMERA POWER: 4-pin Molex connector on the PCB for camera powering
|
| Usage |
- Camera and image acquisition trigger
- Light strobe trigger
- General purpose IO
|
| Electrical specifications |
- TR: Inputs compatible with TTL, LVTTL, differential LVDS, differential RS-422, differential RS-485 signals, protected against electrostatic discharge, with choke for the rejection of common-mode noise
- ST: Opto-isolated outputs, compatible with signals up to 60V, with 3 µs fall time, isolated up to 500V
- ENHANCED IO Inputs or outputs compatible with TTL signals, protected against electrostatic discharge, with high-frequency noise filter
|
| Software |
| Host PC Operating System |
- Microsoft Windows 10, 8.1, 7 for x86 (32-bit) and x86-64 (64-bit) processor architectures
- Linux for x86 (32-bit) and x86-64 (64-bit) processor architectures
Refer to release notes for details
|
| APIs |
- MultiCam 32- and 64-bit binary libraries (Windows and Linux), for ISO-compliant C/C++ compilers
|
| Environmental conditions |
| Operating ambient air temperature |
0 °C to +50 °C / +32 °F to +122 °F |
| Operating ambient air humidity |
10% to 90% RH non-condensing |
| Storage ambient air temperature |
-20 °C to +70 °C/ -4 °F to +158 °F |
| Storage ambient air humidity |
10% to 90% RH non-condensing |
| Certifications |
| Electromagnetic - EMC standards |
- European Council EMC Directive 2004/108/EC
- United States FCC rule 47 CFR 15
|
| EMC - Emission |
- EN 55022:2010 Class B
- FCC 47 Part 15 Class B
|
| EMC - Immunity |
- EN 55024:2010 Class B
- EN 61000-4-2
- EN 61000-4-3
- EN 61000-4-4
|
| KC Certification |
Korean Radio Waves Act, Article 58-2, Clause 3 |
| Flammability |
PCB compliant with UL 94 V-0 |
| RoHS |
European Union Directive 2015/863 (ROHS3) |
| REACH |
European Union Regulation 1907/2006 |
| WEEE |
Must be disposed of separately from normal household waste and must be recycled according to local regulations |
| Ordering Information |
| Product code - Description |
|