EasyQRCode

QR 코드 판독 라이브러리

주요 사양
  • 이미지 내 코드 자동 감지
  • 모델 1, 모델 2 QR 코드, 모든 버전, 모든 레벨에 대한 디코딩
  • 마이크로 QR 코드 디코딩
  • 매우 빠른 작동 속도
  • 노이즈, 블러, 왜곡에 대한 높은 안정성
  • 오류 감지 및 정정
  • 회전 및 뒤집기에 따라 변경되지 않음
  • 등급 표준에 따른 인쇄 품질 검증
  • 다중 코드 판독



비교 구입처 안내


New in Open eVision 23.08
New in Open eVision 23.08

  • Barcode grading with EasyBarCode2
  • Benchmarking tool in Deep Learning Studio
  • Learn feature for EasyMatrixCode
  • Detect damaged data matrix codes
  • Grading and better decoding for EasyBarCode
  • Speed improvements for EasyMatch


New in Open eVision 23.04
New in Open eVision 23.04

  • A new code reader tool ECodeReader allowing to read multiple code types from a single integrated interface
  • Deep Learning Studio is now available on Linux ARM-64 platforms
  • Neural Network “engines” allow additional devices support (OpenVINO, Tensor RT) and increased speed.
  • EasyBarCode2 now supports learning from images to improve its capabilities on similar images.


인쇄 품질 검증
인쇄 품질 검증

EasyQRCode는 QR 코드의 품질을 검사하고 ISO/IEC 15415 및 ISO/IEC TR 29158 표준에 정의된 대로 지표를 계산합니다.


Neo 라이센싱 시스템
Neo 라이센싱 시스템

  • Neo는 Euresys의 새로운 라이선스 시스템입니다. 신뢰할 수 있고 최첨단이며 이제 Open eVision 및 eGrabber 라이선스를 저장할 수 있습니다.
  • Neo에서는 라이선스를 활성화할 위치를 Neo 동글 또는 Neo 소프트웨어 컨테이너 중에 선택할 수 있습니다. 고객은 라이선스 구매 후, 나중에 결정하면 됩니다.
  • Neo 동글은 견고한 하드웨어로서 컴퓨터 간에 유연하게 이전할 수 있습니다.
  • Neo 소프트웨어 컨테이너는 전용 하드웨어가 필요없고, 대신 이를 활성화한 컴퓨터에 링크됩니다.
  • Neo에는 두 가지 방법 중에서 취향대로 사용할 수 있는 전용 Neo License Manager가 함께 제공됩니다. 하나는 직관적이고 사용하기 쉬운 그래픽 사용자 인터페이스이고, 다른 하나는 Neo 라이선싱 절차를 쉽게 자동화할 수 있는 명령줄 인터페이스입니다.


Open eVision Studio: 평가, 프로토타입 제작, 개발툴
Open eVision Studio: 평가, 프로토타입 제작, 개발툴

Open eVision Studio는 Open eVision의 평가, 프로토타입 제작, 개발 툴입니다. 이 툴의 직관적인 그래픽 사용자 인터페이스를 통해 eVision의 2D 이미지 처리 기능을 호출하고 결과를 즉시 확인할 수 있습니다. 스크립트 기능을 사용해 해당 코드를 생성한 다음, 복사하여 사용자의 애플리케이션에 붙여넣을 수 있습니다.

Open eVision Studio는 무료이며(Open eVision 2.0 이상을 사용하는 경우) 라이센스가 필요 없습니다.

간단히 'OPEN EVISION STUDIO 다운로드'를 클릭하여 Open eVision을 설치하면 됩니다. 샘플 이미지, 설명서, 샘플 프로그램도 포함되어 있습니다.


자동 광범위 디코딩
자동 광범위 디코딩

지원되는 코드 유형은 다음과 같습니다.

  • 데이터: 한자, 숫자, 영숫자, 바이트, 혼합 FNC1
  • 모델 1 QR 코드, 모든 버전(1-14), 모든 레벨
  • 모델 2 QR 코드, 모든 버전(1-40), 모든 레벨
  • GS1 기호


ECodeReader: More codes in one scan
ECodeReader: More codes in one scan

ECodeReader simplifies the process of reading multiple codes and types within the same image by integrating EasyMatrixCode2, EasyBarCode2 and EasyQRCode into a single, simple, and unified interface. In some applications, reading multiple code types is a requirement. Doing so, required until now, the use of multiple Code Readers (i.e. one per code type). ECodeReader simplifies that process by integrating the power of EasyMatrixCode2, EasyBarCode2 and EasyQRCode into a single, simple, and unified interface. With ECodeReader, you can thus read Barcodes, Data Matrix codes and QR codes with a single method call. Note: ECodeReader requires the EasyMatrixCode, EasyBarCode and EasyQRCode licenses.


모든 Open eVision 라이브러리는 Windows 및 Linux에서 사용할 수 있습니다.
모든 Open eVision 라이브러리는 Windows 및 Linux에서 사용할 수 있습니다.

  • Microsoft Windows 11, 10, 8.1, 7 for x86-64 (64-bit) processor architecture
  • Linux for x86-64 (64-bit) and ARMv8-A (64-bit) processor architectures with a glibc version greater or equal to 2.18


EasyQRCode 설명
EasyQRCode 설명

QR 코드는 2D 바코드입니다. QR 코드는 일반적인 바코드에 비해 빠른 판독성, 높은 신뢰성, 큰 저장 용량 덕분에 널리 사용되고 있습니다. EasyQRCode는 부품 식별 및 제품/시간 추적 등의 산업용 애플리케이션에 대응하는 강력한 QR 코드 판독 라이브러리입니다. 일반적으로 이러한 애플리케이션에서는 가변적인 내용을 포함하는 QR 코드를 빠르고 안정적으로 디코딩해야 합니다.


DPM - Direct Part MarksDPM

EasyQRCode 알고리즘은 특히DPM(Direct Part Marks)을 판독하는 데 최적화되어 있습니다. 이 알고리즘은 다양한 재질 위에 도트 타각, 레이저 마킹. 잉크젯 인쇄, 전기화학 에칭 등의 방법으로 만든 코드의 왜곡된 저대비 코드를 인식할 수 있습니다.


또한 마이크로 QRCode에도 사용 가능
또한 마이크로 QRCode에도 사용 가능

Open eVision은 EQRCodeReader 클래스를 사용하여 Micro QR 코드를 감지하고 디코딩할 수도 있습니다. 더 적은 데이터를 인코딩해야 할 때 사용하는 일반 QR 코드의 컴팩트 버전입니다. Open eVision Studio 및 샘플 프로그램의 최신 버전으로 확인하십시오.


Software
Host PC Operating System
  • Open eVision is a set of 64-bit libraries that require an Intel compatible processor with the SSE4 instruction set or an ARMv8-A compatible processor.
  • Open eVision can be used on the following operating systems:
    • Microsoft Windows 11, 10, 8.1, 7 for x86-64 (64-bit) processor architecture
    • Linux for x86-64 (64-bit) and ARMv8-A (64-bit) processor architectures with a glibc version greater or equal to 2.18
  • Remote connections
    • Remote connections are allowed using remote desktop, TeamViewer or any other similar software.
  • Virtual machines
    • Virtual machines are supported. Microsoft Hyper-V, Oracle VirtualBox and libvirt hypervisors have been successfully tested.
    • Only the Neo Licensing System is compatible with virtualization.
  • Minimum requirements:
    • 2 GB RAM to run an Open eVision application
    • 8 GB RAM to compile an Open eVision application
    • Between 100 MB and 2 GB free hard disk space for libraries, depending on selected options.
APIs
  • Supported Integrated Development Environments and Programming Languages:
    • Microsoft Visual Studio 2017 (C++, C#, VB .NET, C++/CLI)
    • Microsoft Visual Studio 2019 (C++, C#, VB .NET, C++/CLI)
    • Microsoft Visual Studio 2022 (C++, C#, VB .NET, C++/CLI)
    • QtCreator 4.15 with Qt 5.12
Ordering Information
Product code - Description
Optional accessories