Learn more about our product features:
 

Coaxlink Duo

2CH CoaXPress 프레임 그래버

주요 사양
  • 2CH CoaXPress CXP-6 연결: 카메라 대역폭 1,250 MB/s
  • PCIe 2.0(Gen 2) x4 버스: 공급 대역폭 1,700 MB/s
  • 다기능 디지털 I/O 라인
20개
  • 폭넓은 카메라 제어 기능
  • Memento 이벤트 로그 툴

비교 구입처 안내


가장 빠르고 가장 높은 고해상도 카메라에서 이미지 캡처
가장 빠르고 가장 높은 고해상도 카메라에서 이미지 캡처

  • 업계 최고 수준의 데이터 캡처 속도
  • 카메라 대 호스트 PC 메모리 대역폭 12.5 Gbit/s(1,250 MB/s)


고강도 커넥터
고강도 커넥터

Coaxlink는 신뢰성 높은 연결을 위해 push/pull 래치 시스템이 적용된 DIN 1.0/2.3 커넥터를 사용합니다.


PCIe 2.0(Gen 2) x4 버스
PCIe 2.0(Gen 2) x4 버스

  • 연속 버스 대역폭 1,700 MB/s


Area 스캔 트리거 기능

  • 트리거는 일부분이 위치에 들어 왔을 때 캡처를 시작하는 데 사용됩니다. 하드웨어 트리거는 Coaxlink의 I/O 라인에서 제공됩니다. 소프트웨어 트리거는 애플리케이션에서 제공됩니다.
  • 옵션 트리거 지연을 사용하여 프로그래밍 가능한 시간 동안 캡처를 연기할 수 있습니다.
  • 트리거 제거 기능은 일부 트리거를 무시하는 기능입니다.
  • 카메라 노출 제어 기능을 사용하면 애플리케이션에서 카메라의 노출 시간을 제어할 수 있습니다.
  • 캡처가 시작되면 적절한 시점에 Coaxlink 보드가 출력 라인 중 하나에 연결된 조명 장치를 제어하기 위한 신호를 생성합니다.


Windows, Linux 및 macOS 드라이버 이용 가능
Windows, Linux 및 macOS 드라이버 이용 가능

  • Including support for Intel 32-bit and 64-bit platforms as well as ARM 64-bit platforms


표준 동축 케이블 사용
표준 동축 케이블 사용

  • 데이터 전송, 카메라 제어, 트리거, 전원 공급을 하나로 해결할 수 있는 저렴한 케이블
  • 가장 혹독한 환경에서도 최고의 신뢰성, 유연성, 성능 제공


Memento Event Logging Tool

  • Memento is an advanced development and debugging tool available for Coaxlink cards.
  • Memento records an accurate log of all the events related to the camera, the frame grabber and its driver as well as the application.
  • It provides the developer with a precise timeline of time-stamped events, along with context information and logic analyzer view.
  • 애플리케이션 개발, 디버깅뿐 아니라 기계 운용 중에도 유용한 장점을 제공합니다.


범용 IO 라인
범용 IO 라인

  • 광범위한 센서 및 모션 인코더와 호환:
  • 고속 차동 입력: 최대 5 MHz까지 지원하는 쿼드러처 모션 인코더.
  • 절연 전류 감지 입력: 5V, 12V, 24V 신호 전압 인가 가능, 최대 50 kHz, 최대 500VAC RMS의 갈바닉 개별 절연.
  • 절연 접점 출력.
  • 고속 5V 규격 TTL 입력/LVTTL 출력.


Coaxlink 드라이버에는 다음과 같은 도구가 포함되어 있습니다:
Coaxlink 드라이버에는 다음과 같은 도구가 포함되어 있습니다:

  • Genicam Browser: An application giving access to the Genicamfeatures exposed by the GenTL Producer(s) in the system.
  • GenTL 콘솔: Euresys GenTL Producer에 의해 노출된 함수와 명령에 대한 액세스를 제공하는커맨드 라인 툴.


Cable support
Cable support

  • Long cable support for Coaxlink "CXP-6"
CXP-6 속도(6.25 Gbps)에서 40m CXP-3 속도(3 Gbps)에서 100m


GPU 직접 전송
GPU 직접 전송

  • AMD DirectGMA 및 NVIDIA(CUDA) 샘플 프로그램 제공 가능
  • Direct GPU transfer eliminates unnecessary system memory copies, lowers CPU overhead, and reduces latency, resulting in significant performance improvements in data transfer times for applications.
  • AMD DirectGMA를 사용하여 이미지 데이터를 GPU 메모리로 직접 캡처. AMD FirePro W5x00 이상 제품 및 모든 AMD FirePro S 시리즈 제품과 호환


고성능 DMA(Direct Memory Access)
고성능 DMA(Direct Memory Access)

  • Direct transfer into user-allocated memory and hardware boards that expose PCI addresses
  • 하드웨어 분산-수집(scatter-gather) 지원
  • 64비트 주소 지정 기능


Compliant with <a href="https://www.euresys.com/genicam" target="_blank">Genicam</a> Including support for
Compliant with Genicam Including support for

  • GenApi
  • 표준 기능 명명 규칙(SFNC)
  • GenTL


Mechanical
Form Factor PCI Express card
Format Standard profile, half length, 4-lane PCI Express card
Cooling method Air cooling, fan-cooled heatsink
Mounting For insertion in a standard height, 4-lane or higher, PCI Express card slot
Connectors
  • 'A', 'B' on bracket:
    • 2x DIN 1.0/2.3 female connectors
    • CoaXpress host interface
  • EXTERNAL I/O' on bracket:
    • 26-pin 3-row high-density female sub-D connector
    • I/O lines and power output
  • INTERNAL I/O 1' and 'INTERNAL I/O 2' on PCB:
    • 2x 26-pin 2-row 0.1" pitch pin header with shrouding
    • I/O lines and power output
  • 'AUXILIARY POWER INPUT' on module:
    • 6-pin PEG power socket
    • 12 VDC power input for PoCXP camera(s) and I/O power
  • 'C2C-LINK' on module:
    • 6-pin 2-row 0.1-in header
    • Card to card link
Lamp indicators
  • 'A', 'B' on bracket:
    • 2x Bi-color red/green LEDs
    • CoaXPress Host connector indicator lamps
  • 'FPGA STATUS LAMP' on PCB:
    • Bi-color red/green LED
    • FPGA status lamp
  • 'BOARD STATUS LAMP' on PCB:
    • Bi-color red/green LED
Switches 'RECOVERY' on card PCB:
  • 3-pin 1-row 0.1" header
  • Firmware emergency recovery
Dimensions L 167.65 mm x H 111.15 mm L 6.6 in x H 4.38 in
Weight 160 g, 5.64 oz
Host bus
Standard PCI Express 2.0
Link width
  • 4 lanes
  • 1 lane or 2 lanes with reduced performance
Link speed
  • 5.0 GT/s (PCIe 2.0)
  • 2.5 GT/s (PCIe 1.0) with reduced performance
Maximum payload size 512 bytes
DMA 32- and 64-bit
Peak delivery bandwidth 2,000 MB/s
Effective (sustained) delivery bandwidth 1,700 MB/s (Host PC motherboard dependent)
Power consumption Typ. 11.4 W ( 2.7 W @ +3.3V, 8.7 W @ +12V), excluding camera and I/O power output
Camera / video inputs
Interface standard(s) CoaXPress 1.0, 1.1 and 1.1.1
Connectors 2x DIN1.0/2.3 75 Ohms CXP-6
Status LEDs 1 CoaXPress Host connection status per connector
Number of cameras
  • Area-scan cameras:
    • One 1- or 2-connection camera
    • One or two 1-connection cameras
  • Line-scan cameras:
    • One 1- or 2-connection camera
    • One or two 1-connection cameras
Line-scan cameras supported No
Maximum aggregated camera data transfer rate 12.5 Gbit/s (1,250 MB/s)
Supported CXP down-connection speeds 1.25 GT/s (CXP-1), 2.5 GT/s (CXP-2), 3.125 GT/s (CXP-3), 5 GT/s (CXP-5), and 6.25 GT/s (CXP-6)
Number of CXP data streams (per camera) 1 data stream per camera
Maximum CXP stream packet size 16,384 bytes
PoCXP (Power over CoaXPress)
  • PoCXP Safe Power:
    • 17 W of 24V DC regulated power per CoaXPress connector
    • PoCXP Device detection and automatic power-on
    • Overload and short-circuit protections
  • On-board 12V to 24V DC/DC converter
  • A +12V power source must be connected to the AUXILIARY POWER INPUT connector using a 6-pin PEG cable
Camera types
  • Area-scan cameras:
    • Gray-scale and color (YCbCr, YUV, RGB and Bayer CFA)
    • Single-tap (1X-1Y) progressive-scan
  • Line-scan cameras and contact imaging sensors:
    • Gray-scale and color RGB
Camera pixel formats supported Raw, Monochrome, Bayer, RGB, and RGBA (PFNC names):
  • Raw
  • Mono8, Mono10, Mono12, Mono14, Mono16
  • BayerXX8, BayerXX10, BayerXX12, BayerXX14, BayerXX16 where XX = GR, RG, GB, or BG
  • RGB8, RGB10, RGB12, RGB14, RGB16
  • RGBA8, RGBA10, RGBA12, RGBA14, RGBA16
  • YCbCr601_422_8, YCbCr601_422_10
  • YCbCr709_422_8, YCbCr709_422_10
  • YUV422_8, YUV422_10
Area-scan camera control
Trigger
  • Precise control of asynchronous reset cameras, with exposure control.
  • Support of camera exposure/readout overlap.
  • Support of external hardware trigger, with optional delay and trigger decimation.
Strobe
  • Accurate control of the strobe position for strobed light sources.
  • Support of early and late strobe pulses.
On-board processing
On-board memory 1 GB
Image data stream processing
  • Unpacking of 10-/12-/14-bit to 16-bit with selectable justification to LSb or MSb
  • Optional swap of R and B components
  • Little endian conversion
Data stream statistics
  • Measurement of:
    • Frame rate (Area-scan only)
    • Line rate
    • Data rate
  • Configurable averaging interval
Event signaling and counting
  • The application software can be notified of the occurrence of various events:
    • Standard event: the EVENT_NEW_BUFFER event notifies the application of newly filled buffers
    • A large set of custom events
  • Custom events sources:
    • I/O Toolbox events
    • Camera and Illumination control events
    • CoaXPress data stream events
    • CoaXPress host interface events
  • Each custom event is associated with a 32-bit counter that counts the number of occurrences
  • The last three 32-bit context data words of the event context data can be configured with event-specific context data:
    • Event-specific data
    • State of all System I/O lines sampled at the event occurrence time
    • Value of any event counter
Input LUT (Lookup Table)
  • Available for monochrome cameras
    • 8 to 8 bits
    • 10 to 8, 10 or 16 bits
    • 12 to 8, 12 or 16 bits
General Purpose Inputs and Outputs
Number of lines 20 I/O lines:
  • 4 differential inputs (DIN)
  • 4 singled-ended TTL inputs/outputs (TTLIO)
  • 8 isolated inputs (IIN)
  • 4 isolated outputs (IOUT)
Usage
  • Any I/O input lines can be used by any LIN tool of the I/O Toolbox
  • Selected pairs of I/O input lines can be used by any QDC tool of the I/O toolbox to decode A/B signals of a motion encoder
  • The LIN and QDC tools outputs can be further processed by the other tools (DIV, MDV, DEL) of the I/O toolbox to generate any of the following "trigger" events:
    • The "cycle trigger" of the Camera and Illumination controller
    • The "cycle sequence trigger" of the Camera and Illumination controller
    • The "start-of-scan trigger" of the Acquisition Controller (line-scan only)
    • The "end-of-scan trigger" of the Acquisition Controller (line-scan only)
Electrical specifications
  • DIN: High-speed differential inputs compatible with ANSI/EIA/TIA-422/485 differential line drivers and complementary TTL drivers
  • TTLIO: High-speed 5V-compliant TTL inputs or LVTTL outputs, compatible with totem-pole LVTTL, TTL, 5V CMOS drivers or LVTTL, TTL, 3V CMOS receivers
  • IIN: Isolated current-sense inputs with wide voltage input range up to 30V, compatible with totem-pole LVTTL, TTL, 5V CMOS drivers, RS-422 differential line drivers, potential free contacts, solid-state relays and opto-couplers
  • IOUT: Isolated contact outputs compatible with 30V / 100mA loads
Filter control
  • Glitch removal filter available on all System I/O input lines
  • Configurable filter time constants:
    • for DIN and TTLIO lines: 50 ns, 100 ns, 200 ns, 500 ns,1 µs
    • for IIN lines: 500 ns, 1 µs, 2 µs, 5 µs, 10 µs
Polarity control Yes
Power output Non-isolated, +12V, 1A, with electronic fuse protection
I/O Toolbox tools The I/O Toolbox is a configurable interconnection of tools that generates events (usually triggers) from input lines. The composition of the toolset is product- and firmware-dependent.
  • Line Input tool (LIN): Edge detector delivering events on rising or falling edges of any selected input line.
  • Quadrature Decoder tool (QDC): A composite tool including:
    • A quadrature edge detector delivering events on selected transitions of selected pairs of input lines.
    • An optional backward motion compensator for clean line-scan image acquisition when the motion is unstable.
    • A 32-bit up/down counter for delivering a position value.
  • Divider tool (DIV): to generate an event every nth input events from any I/O toolbox event source.
  • Multiplier/divider tool (MDV): to generate m events every d input events from any I/O toolbox event source.
  • Delay tool (DEL): to delay up to 16 events from one or two I/O toolbox event sources, by a programmable time or number of motion encoder ticks (any QDC events).
  • User Actions Scheduler tool (UAS): to delegate the execution of User Actions at a scheduled time or encoder position. Possible user actions include setting low/high/toggle any bit of the User Output Register or generation of any User Events.
I/O Toolbox composition Firmware-dependent I/O toolbox composition:
  • 1-camera: 8 LIN, 1 QDC, 1 DIV, 1 MDV, 2 DEL, 1 UAS
  • 2-camera: 8 LIN, 1 QDC, 1 DIV, 1 UAS
C2C-Link
Description
  • Allows to accurately synchronize the trigger and start-of-exposure of multiple grabber-controlled area-scan and line-scan cameras.
  • C2C-Link is able to synchronize cameras connected
    • to the same Coaxlink card
    • to different cards in the same PC (requires an accessory cable such as the "3303 C2C-Link Ribbon Cable" or a custom-made C2C-Link cable)
    • to different cards in different PCs (requires one "1636 InterPC C2C-Link Adapter" for each PC and one RJ 45 CAT 5 STP straight LAN cable for each adapter but the last one)
Specification
  • Maximum distance
    • 60 cm inside a PC
    • 1200 m cumulated adapter to adapter cable length
  • Maximum trigger rate
    • 2.5 MHz for configurations using a single PC, or up to 10 PCs and 100 m total C2C-Link cable length
    • 200 kHz for configurations up to 32 PCs and 1200m total C2C-Link cable length
  • Trigger propagation delay from master to slave devices
    • Less than 10 ns for cameras on the same Coaxlink card or on different Coaxlink cards in the same PC
    • Less than 265 ns for cameras on different Coaxlink cards in different PCs (3 PCs and 40m total C2C-Link cable length)
Software
Host PC Operating System
  • Microsoft Windows 10, 8.1, 7 for x86 (32-bit) and x86-64 (64-bit) processor architectures
  • Linux for x86 (32-bit), x86-64 (64-bit) and aarch64 (64-bit) processor architectures
  • macOS for x86-64 (64-bit) processor architecture
Refer to release notes for details
APIs EGrabber class, with C++ and .NET APIs:
  • .NET assembly designed to be used with development environments compatible with .NET frameworks version 2.0 or higher
GenICam GenTL producer libraries compatible with C/C++ compilers:
  • x86 dynamic library designed to be used with ISO-compliant C/C++ compilers for the development of x86 applications
  • x86_64 dynamic library designed to be used with ISO-compliant C/C++ compilers for the development of x86_64 applications
  • aarch64 dynamic library designed to be used with ISO-compliant C/C++ compilers for the development of aarch64 applications
Memento Compatible with Memento Event Logging tool
Environmental conditions
Operating ambient air temperature 0 to +55 °C / +32 to +131 °F
Operating ambient air humidity 10 to 90% RH non-condensing
Storage ambient air temperature -20 to +70 °C / -4 to +158 °F
Storage ambient air humidity 10 to 90% RH non-condensing
Certifications
Electromagnetic - EMC standards
  • European Council EMC Directive 2004/108/EC
  • United States FCC rule 47 CFR 15
EMC - Emission
  • EN 55022:2010 Class B
  • FCC 47 Part 15 Class B
EMC - Immunity
  • EN 55024:2010 Class B
  • EN 61000-4-3
  • EN 61000-4-4
  • EN 61000-4-5
  • EN 61000-4-6
KC Certification Korean Radio Waves Act, Article 58-2, Clause 3
Flammability PCB compliant with UL 94 V-0
RoHS European Union Directive 2011/65/EU (ROHS2)
REACH European Union Regulation 1907/2006
WEEE Must be disposed of separately from normal household waste and must be recycled according to local regulations
Ordering Information
Product code - Description
Optional accessories
HS Acquisition

AOI, 3D SPI, 3D 리드/볼 검사 기계용 고속 이미지 캡처

Coaxlink 및 Grablink 카드는 시판되는 가장 빠른 디지털 카메라를 통해 안정적이고 신뢰할 수 있는 이미지를 포착하는 신뢰도 높은 산업용 프레임 그래버입니다. 이 제품은 정밀한 카메라 제어와 동기화 기능이 장점입니다.
  • AOI(자동 광학 검사) 기계
  • 3D SPI(솔더 페이스트 검사) 기계
  • 3D 리드/볼 검사 기계
ITS Transmission Coax

장거리 동축 케이블을 통해 교통 감시, 모니터링, 통제용 HD 비디오 전송 및 캡처