Coaxlink Quad CXP-3
4 接続 CXP-3 CoaXPress フレームグラバー
© EURESYS S.A. - Subject to change without notice
8/14/2024 Datasheet 4 接続 CXP-3 CoaXPress フレームグラバー
Main benefitsOther benefits仕様Mechanical
Host bus
Camera / video inputs
Frame grabber / video outputs
Video delivery
Audio / Video Outputs
Audio modules
Audio inputs
Audio outputs
Area-scan camera control
Line-scan camera control
On-board processing
On-board video codec
General Purpose Inputs and Outputs
C2C-Link
Streaming
Network
User authentication and access policy
Encryption mechanisms
Standard and proprietary APIs
User interface
System integration
Electrical
Host system requirements
Software
Environmental conditions
Certifications
Reliability
Image processing
Ordering Information
Offices
|
ハイライト
CoaXPressは高速画像データ転送ように開発されたデジタルインターフェース規格です
CoaXPress(CXP)は、マシンビジョン、医用撮像、ライフサイエンス、放送、および防衛などの専門的な産業用イメージング用途における高速画像転送を実現するために開発されました。
CoaXPressは、カメラからホストPCのフレームグラバーへの高速ビデオデータストリーミングや、カメラへのコマンドアンドコントロールのアップリンクなど、双方向データ通信に同軸ケーブルを使用することを特徴としています。また、インターフェースは、1、2、4、8、または16接続を使って産業で利用できる最高の帯域幅を達成するカメラで簡単に拡張できます。そのため、CoaXPressは高速イメージングにおいて最適なインターフェースをされています。
Main benefits
Other benefits
- Memento続きを読むビジョンを使用したハイエンド検査装置では、フレームグラバーが、カメラ本体との同期だけでなく、動体検知制御や照明制御などの各種外部機器と同期して画像を取得する役割を果たしています。 こうしたシステムのデバッグには、往々にして、ソフトウェアプロファイルと併用されるオシロスコープやロジックアナライザーなどの複雑な機器が必要とされることがあります。1秒間のフレームレートが数百ないし数千を超える最新型カメラでは、こうした問題はますます複雑化することになります。
- GenICam続きを読むGenICamは、産業用カメラとコンピュータソフトウェアアプリケーション (マシンビジョンなど) をインターフェイス接続するための一連のグローバル規格です。この規格により、画像処理、取り込み、および転送における表現、インターフェイス、およびプロセスを均一化することができます。すべてのユーザーが使用する名前と構成を共通化することで、サプライヤの実装内容、機能セット、またはインターフェイス技術に左右されることなく意思疎通することができます。GenICamは、GigE Vision、USB3 Vision、CoaXPress、Camera Linkといった高速ビデオ規格の基盤なのです。
仕様
Mechanical
- Form factor
- null
- Format
- null
- Cooling method
- null
- Housing
- null
- Mounting
- null
- Connectors
- null
- LED indicators
- null
- Switches
- null
- Dimensions
- null
- Weight
- null
- PCB connectors
- null
- Flat cable
- null
Host bus
- Standard
- null
- Link width
- null
- Link speed
- null
- Maximum payload size
- null
- DMA
- null
- Peak delivery bandwidth
- null
- Effective (sustained) delivery bandwidth
- null
- PCI Express slot power rating
- null
- Power consumption
- null
Camera / video inputs
- Camera interface standard
- null
- Interface standard(s)
- null
- Maximum link speed
- null
- Maximum link width
- null
- Camera powering
- null
- Connectors
- null
- Termination resistor
- null
- Formats and standards (HD)
- null
- Formats and standards (SD)
- null
- Status LEDs
- null
- Video inputs
- null
- Native resolution
- null
- Frame rate
- null
- Event reporting
- null
- Video presence indicators
- null
- ECCO - Extended Camera Link Cable Operation
- null
- Number of cameras
- null
- Number of cameras (at full frame rate)
- null
- Maximum number of cameras
- null
- Line-scan cameras supported
- null
- Maximum aggregated camera data transfer rate
- null
- A/D converter
- null
- Maximum camera line rate
- null
- Camera Link configuration
- null
- Camera Link clock frequency
- null
- Supported CXP down-connection speeds
- null
- Supported CXP up-connection speeds
- null
- Number of CXP data streams (per camera)
- null
- Maximum CXP stream packet size
- null
- PoCL (Power over Camera Link)
- null
- PoCXP (Power over CoaXPress)
- null
- Camera types
- null
- Camera pixel formats supported
- null
- Maximum image size
- null
Frame grabber / video outputs
- Interface standard
- null
- Interface standard(s)
- null
- Maximum link speed
- null
- Maximum link width
- null
- Maximum data rate
- null
- Connectors
- null
- Status LEDs
- null
Video delivery
- Raw video format(s)
- null
- Deliverable video resolution (HD)
- null
- Deliverable video resolution (SD)
- null
Audio / Video Outputs
- Loop-through
- null
- Connectors
- null
Audio modules
- Specification
- null
Audio inputs
- Number of inputs
- null
- Type
- null
- Sampling rate
- null
- Audio format
- null
- Time stamping resolution
- null
- Connectors
- null
Audio outputs
- Number of outputs
- null
- Type
- null
- Audio format
- null
- Time stamping resolution
- null
- Connectors
- null
Area-scan camera control
- Trigger
- null
- Strobe
- null
Line-scan camera control
- Scan/page trigger
- null
- Line trigger
- null
- Line strobe
- null
On-board processing
- On-board memory
- null
- Image data stream processing
- null
- Flat-field correction
- null
- Input LUT (Lookup Table)
- null
- Geometrical operators
- null
- Bayer CFA to RGB decoder
- null
- Pixel binning
- null
- CustomLogic
- null
- CustomLogic firmware variants
- null
- Data stream statistics
- null
- Event signaling and counting
- null
- Video
- null
On-board video codec
- On-board video compression
- null
- Video encoders
- null
- Number of streams
- null
- Video decoders
- null
- Video stream control
- null
- Bitrate
- null
- Video streams resolution
- null
- MJPEG encoding performance
- null
- Latency
- null
- Video processing
- null
General Purpose Inputs and Outputs
- Number of lines
- null
- Connectors
- null
- Usage
- null
- Electrical specifications
- null
- Filter control
- null
- Polarity control
- null
- Power output
- null
- I/O Toolbox tools
- null
- I/O Toolbox composition
- null
- Watchdog
- null
C2C-Link
- Description
- null
- Specification
- null
Streaming
- Media transport protocol
- null
- Media transport control protocol
- null
- RTP transport modalities
- null
Network
- LAN interface
- null
- LAN connector
- null
- Application layer protocols
- null
- Transport layer protocols
- null
- Internet layer protocols
- null
- IP address allocation methods
- null
- Number of IP address/MAC address
- null
User authentication and access policy
- HTTP and RTSP authentication
- null
- WS authentication
- null
- Web pages
- null
- Access policy
- null
Encryption mechanisms
- Web service
- null
- HTTPS web pages
- null
Standard and proprietary APIs
- ONVIF Profile S 1.0
- null
- Proprietary web services
- null
- Maintenance client interface
- null
- Web pages
- null
User interface
- Local interface
- null
System integration
- Alarm inputs
- null
- Alarm inputs connectors
- null
- Relay outputs
- null
- Relay outputs connectors
- null
- COM
- null
- COM connector
- null
- Pan/Tilt/Zoom protocol
- null
- USB Ports
- null
- USB GPS Receiver
- null
- USB Storage
- null
- Watchdog
- null
Electrical
- Supply voltage
- null
- Power connector
- null
- Power consumption
- null
- Power status
- null
- AC input
- null
- DC output
- null
- Rated power
- null
Host system requirements
- Processor
- null
- System memory
- null
- Graphic card
- null
Software
- Driver name
- null
- First release
- null
- Last release
- null
- Current release
- null
- Host PC Operating System
- null
- APIs
- null
- Memento supported
- null
- Related libraries
- null
Environmental conditions
- Operating ambient air temperature
- null
- Operating ambient air humidity
- null
- Storage ambient air temperature
- null
- Storage ambient air humidity
- null
- Dissipated power
- null
- Shock and vibration
- null
Certifications
- Certification marks
- null
- Safety standards
- null
- EMC standards
- null
- EMC - Emission
- null
- EMC - Immunity
- null
- KC Certification
- null
- Temperature
- null
- Shock and vibration
- null
- Flammability
- null
- RoHS
- null
- REACH
- null
- WEEE
- null
Reliability
- MTBF
- null
- Failure rate
- null
Image processing
- Input
- null
- Output
- null
- Performance
- null
- Requirements
- null
Ordering Information
- Product status
- null
- Product code - Description
- null
- Options
- null
- Included accessories
- null
- Optional accessories
- null
- Included libraries
- null
- Related products
- null
ダウンロードページ
eGrabber for Coaxlink, Grablink Duo, and Gigelink
- Windows 10 versions older than 1809 and Windows Server 2016 were supported up to eGrabber 25.12
- Linux kernel versions older than 4.4 and GNU C Library versions older than 2.23 were supported up to eGrabber 25.12
- macos-aarch64-kext and macos-x86_64-kext driver packages were supported up to eGrabber 25.12
- Coaxlink Quad CXP-12 JPEG was supported up to eGrabber 25.12
- The
Coaxlink_NetApi.dllassembly was supported up to eGrabber 25.03 - Windows 7, Windows 8.1, Windows Server 2008 R2, and Windows Server 2012 R2 were supported up to eGrabber 24.12
- Windows x86 (32-bit) was supported up to eGrabber 21.0
- Linux x86 (32-bit) was supported up to eGrabber 17.0
- Before version 12.8, the driver package was called Coaxlink
- Coaxlink Quad CXP-3 was supported up to Coaxlink 10.5.2
Memento
- Windows 10 versions older than 1809 and Windows Server 2016 were supported up to Memento 25.12
- Linux kernel versions older than 4.4 and GNU C Library versions older than 2.23 were supported up to Memento 25.12
- macos-aarch64-kext and macos-x86_64-kext driver packages were supported up to Memento 25.12
- Windows 7, Windows 8.1, Windows Server 2008 R2, and Windows Server 2012 R2 were supported up to Memento 24.12
- Windows x86 (32-bit) was supported up to Memento 21.0
- Linux x86 (32-bit) was supported up to Memento 17.0