Coaxlink 系列

CoaXPress 图象采集卡，极致性能，卓越价值

At a glance

PCIe 图像采集卡，多达8路CoaXPress 连接
特征丰富的多达 20 条数字 I/O 线
丰富的相机控制功能
Memento 事件日志工具
Copper or fiber optic connection

CXP-over-Fiber

CXP-12

CXP-6

CXP-3

Coaxlink QSFP+

四路 CoaXPress-over-Fiber 采集卡

Coaxlink CXP-12 to QSFP+ Converter

四路CoaXPress CXP-12到CoaXPress-over-Fiber转换器

Coaxlink Quad CXP-12

四路 CoaXPress CXP-12 图像采集卡

Coaxlink Quad CXP-12 JPEG

四路 CoaXPress CXP-12 图像采集卡，带 JPEG 压缩

Coaxlink Quad CXP-12 Value

四路 CoaXPress CXP-12 图像采集卡

Coaxlink Quad CXP-12 DF

四路CoaXPress CXP-12采集卡，带数据转发

Coaxlink Duo CXP-12

双路 CoaXPress CXP-12 图像采集卡

Coaxlink Mono CXP-12 LH

单路 CoaXPress CXP-12 图像采集卡

Coaxlink Octo

PCIe 3.0 八路 CoaXPress 图像采集卡

Coaxlink Quad G3 DF

PCIe 3.0 四路 CoaXPress 图像采集卡，带有数据转发功能

Coaxlink Quad G3

PCIe 3.0 四路 CoaXPress 图像采集卡（风扇冷却型散热器）

Coaxlink Quad G3 LH

PCIe 3.0 四路 CoaXPress 图像采集卡（无源散热器）

Coaxlink Quad 3D-LLE

Quad CXP-６图像采集卡，板载激光线抽提用于三维分析

连接最快速最高分辨率的相机来采集图像

在同行业中最高的数据采集速率
相机到主机PC内存的带宽高达5,000 MB/s

稳健的连接器，确保可靠连接

Coaxlink CXP-6 使用 DIN 1.0/2.3 连接器，带推/拉闩锁系统
Coaxlink CXP-12 使用 Micro-BNC (HD-BNC) 连接器提供可靠的推转卡环式正锁，可快速简便的连接和断开连接

CustomLogic：制定您自己的 FPGA 逻辑！

CustomLogic 是一款 FPGA 设计套件，可以用它进行设计，并将 FPGA 代码上传到 Coaxlink 板上
它兼容Coaxlink Octo、Coaxlink Quad CXP-12和Coaxlink QSFP+，AMD Kintex Ultrascale XCKU035 FPGA资源的利用率高达70%。
设计阶段使用 Xilinx Vivado 开发工具（不提供）。
使用 CustomLogic 时无需任何附加硬件

高性能 DMA（直接存储器存取）

直接传输到用户分配的内存和显示 PCI 地址的硬件板
硬件分散－聚集支持
64 位寻址能力

线扫描触发能力 2/2

Coaxlink 图像采集卡根据从运动编码器接收到的信号来控制相机扫描率。如果零件移动速度变快，相机的采集线率将增大。如果零件移动速度变慢，相机的采集线率将减小。
Coaxlink 板解读来自正交运动编码器的 A/B 信号，了解零件向哪个方向（向前或向后）移动。
也可以在对象只向前移动或只向后移动时命令 Coaxlink 卡采集激光线。
监测到向后运动时，名为“向后动作取消”的功能即停止采集。当在采集中断位置再次向前运动时，自动恢复行采集。
速率转换器能够让相机以任何低于或高于运动编码器分辨率的可编程分辨率来采集行。这就为设计师在应用程序开发过程中提供了惊人的自由度和灵活度。
速率分割器允许相机采集的图像分辨率高于或低于运动编码器的分辨率，它实现于利用一个可编程的整数倍来对编码器输入信号进行分割。

兼容<a target="_blank" href="https://www.euresys.com/en/Products/Machine-Vision-Software/eGrabber"target="_blank">eGrabber

兼容eGrabber

eGrabber Studio：eGrabber新型交互式评估和演示应用程序
GenICam 浏览器：该应用程序提供对 GenTL Producer 中 GenICam 功能的访问渠道。
GenTL 控制台：该命令行工具提供对 Euresys GenTL Producer 功能和命令的访问渠道。

PCIe 3.0 (Gen 3) x4 / x8 或 PCIe 2.0 (Gen 2) x4 总线

高达 6,700 MB/s 的持续总线带宽

使用标准同轴电缆

只需一条并不昂贵的电缆，就可完成数据传输、相机控制、触发器和电源供应
顶级的可靠性和灵活性，可在恶劣环境执行

直接GPU传输

可提供用于AMD DirectGMA和NVIDIA (CUDA)的样例程序。
GPU 直接传输消除了不必要的系统内存副本，降低了 CPU 开销，减少了延迟，从而显著改善了应用程序的数据传输时间。
使用AMD的DirectGMA，可直接将图像数据采集到GPU内存。兼容AMD FirePro W5x00和更高版本以及所有AMD FirePro S系列产品。

区域扫描触发功能

触发器用于在零件就位时启动采集。硬件触发器来自 Coaxlink 的 I/O 线。软件触发器来自于应用程序。
可控的延时触发器，用来控制推迟图像采集的时间点。
触发抽取功能允许跳过某些触发器。
相机曝光控制允许应用来控制相机的曝光时间。
当系统开始采集图像时，Coaxlink采集卡会在一个适当的时间点生成信号来控制连接在输出端的照明设备。

通过速率转换器实现灵活的线扫相机操作

速率转换器是一个智能的、可编程的倍频器/分频器。
用于运动编码器和线扫描相机，允许用户选择该图像中的像素纵横比。
它提供了一种方法来校准采集链以轻松达到正方形（1:1 纵横比）像素。

符合 Genicam 标准

包括支持

GenApi
标准功能命名约定（SFNC）
GenTL

电缆支持

Coaxlink CXP-6 支持长电缆

CXP-6 速度时 40 米（6.25 Gbps）
CXP-3 速度时 100 米（3 Gbps）

Coaxlink CXP-12 支持长电缆

在 CXP-12 速度 (12.5 Gbps) 下，长度为 40 米
CXP-6 速度时 72 米（6.25 Gbps）
CXP-3 速度时 100 米（3 Gbps）

Memento 事件日志工具

Memento是供Coaxlink和Grablink卡使用的高级开发和调试工具。
Memento 记录与相机、图像采集卡及其驱动程序以及应用程序相关的所有事件的准确日志。
对于包含时间戳的时间，它为开发人员提供精确的时间表，也提供上下文信息和逻辑分析器视图。
它可以在应用程序开发和调试，以及机器操作期间提供宝贵的协作。

通用 I/O 线

兼容多种传感器和运动编码器。
高速差分输入：正交运动编码器，支持高达 5 MHz。
隔离式电流感应输入：接受 5V、12V、24V 信号电压，最高 50 kHZ，个别电气隔离高达 250VDC 和 170VAC RMS。
隔离触式输出。
高速 5V 兼容 TTL 输入/LVTTL 输出。

线扫描触发能力 1/2

Coaxlink 支持连续滚网扫描（以检查无限、连续移动的表面而不丢失行）和离散的目标扫描（以采集在相机前方移动的目标图像）。

触发器用于在零件就位时启动采集。硬件触发器来自主板 I/O 线。软件触发器来自于应用程序。
启动以后，采集将：
- 无限进行下去 (用于滚网式监测应用)
- 继续进行可编程的行数（以采集已知长度的目标图像）
- 继续进行直至收到结束触发信号（以采集可变长度的目标图像）
可控的延时触发器，用来以可编程的行数推迟开始采集。

C2C-Link相机同步

可精确同步相连的多个面扫或线扫相机

同一张卡
同一台PC中的不同卡
不同PC中的不同卡

Windows、Linux和macOS驱动程序可用

支持英特尔64位平台以及ARM 64位平台

通过在列中选择，对产品进行比较
产品之间的差异突出显示为蓝色。

选择产品

Mechanical

Format

Standard profile, half length, 8-lane PCI Express card

Cooling method

Air cooling, fan-cooled heatsink

Housing

Aluminum housing

Mounting

For insertion in a standard height, 8-lane or higher, PCI Express card slot

Desktop

Connectors

'QSFP+' on bracket:
- Enhanced Quad Small Form-factor Pluggable port
- CoaXPress-over-Fiber host interface
'EXTERNAL I/O' on bracket:
- 26-pin 3-row high-density female sub-D connector
- I/O lines and power output
'INTERNAL I/O 1' and 'INTERNAL I/O 2' on PCB:
- 2x 26-pin 2-row 0.1" pitch pin header with shrouding
- I/O lines and power output
'I/O EXTENSION' on PCB:
- 26-pin 2-row 0.05" pitch pin header with shrouding
- I/O extension lines and power output
'AUXILIARY POWER INPUT' on module:
- 6-pin PEG power socket
- 12 VDC power input for I/O power
'C2C-LINK' on module:
- 6-pin 2-row 0.1" header
- Card to card link

'A', 'B', 'C', 'D' on front panel:
- 4x Micro BNC female connectors
- CoaXPress host interface
'QSFP+' on rear panel:
- Enhanced Quad Small Form-factor Pluggable port
- CoaXPress-over-Fiber device interface
'POWER IN' on rear panel:
- 2-pin 5.08mm pitch terminal socket
- 24 V DC power input for internal use and PoCXP

LED indicators

'A', 'B', 'C', 'D' on bracket:
- Bi-color red/green LEDs
- CoaXPress Host connector indicator
'FPGA STATUS LAMP' on PCB:
- Bi-color red/green LED
- FPGA status indicator
'BOARD STATUS LAMP' on PCB:
- Bi-color red/green LED
- Board status indicator

'A', 'B', 'C', 'D' on front panel:
- Bi-color red/green LEDs
- CoaXPress Host connector indicator
'A', 'B', 'C', 'D' on rear panel:
- Bi-color red/green LEDs
- CoaXPress Device connector indicator
'FPGA OK' on rear panel:
- Bi-color red/green LED
- FPGA status indicator
'BOARD OK' onrear panel:
- Bi-color red/green LED
- Board status indicator

Switches

'RECOVERY' on PCB:

3-pin 1-row 0.1" header or 2-way DIP switch
Firmware emergency recovery

Dimensions

PCB L X H: 167.65 mm x 111.15 mm, 6.6 in x 4.38 in

L 112 mm x H 55 mm x D 208 mm

Weight

176 g, 6.21 oz (without transceiver)

TBD g, TBD oz (3629)

Host bus

Standard

PCI Express 3.0

Link width

8 lanes
1 lane, 2 lanes or 4 lanes with reduced performance

Link speed

8.0 GT/s (PCIe 3.0)
5.0 GT/s (PCIe 2.0) with reduced performance

Maximum payload size

512 bytes

DMA

32- and 64-bit

Peak delivery bandwidth

7,800 MB/s

Effective (sustained) delivery bandwidth

6,700 MB/s (Host PC motherboard dependent)

Power consumption

Typ. 16.5 W ( 3.0 W @ +3.3V, 12.5 W @ +12V), excluding I/O power output and optical transceiver module

Camera / video inputs

Interface standard(s)

CoaXPress 1.0, 1.1, 1.1.1 and 2.0, CoaXPress-over-Fiber Bridge Protocol 1.0

Connectors

Enhanced Quad Small Form-factor Pluggable (QSFP+) port
Compliant with SFF-8436 (4 x10 Gbit/s Pluggable Transceiver) specification
Compliant with CoaXPress over Fiber
Available power for the module: 3.5 W (SFF-8436 Power Level 4)

Four micro-BNC 75 Ohms (also known as HD-BNC™) CXP-12

Status LEDs

One CoaXPress Host connection status LED per connection

Number of cameras

Area-scan cameras:
- One 1- or 2- or 4-connection camera
Line-scan cameras:
- One 1- or 2- or 4-connection camera

Area-scan cameras:
- One 1- or 2- or 4-connection camera
Line-scan cameras:
- One 1- or 2- or 4-connection camera

Maximum aggregated camera data transfer rate

5,000 MB/s

50 Gbit/s (5,000 MB/s)

Supported CXP down-connection speeds

1.25 GT/s (CXP-1), 2.5 GT/s (CXP-2), 3.125 GT/s (CXP-3), 5 GT/s (CXP-5), 6.25 GT/s (CXP-6), 10.0 GT/s (CXP-10), and 12.5 GT/s (CXP-12)

Supported CXP up-connection speeds

Low-speed 20.83... Mbps (CXP-1 to CXP-6)
Low-speed 41.66... Mbps (CXP-10, CXP-12)

Low-speed 20.83... Mbps (CXP-1 to CXP-6)
Low-speed 41.66... Mbps (CXP-10, CXP-12)

Number of CXP data streams (per camera)

1 data stream per camera

Maximum CXP stream packet size

16,384 bytes

PoCXP (Power over CoaXPress)

PoCXP Safe Power:
- PoCXP Device detection and automatic power-on
- Overload and short-circuit protections
A +24V power source must be connected to the POWER IN connector

Camera types

Area-scan cameras:
- Grayscale and color (YCbCr, YUV, RGB and Bayer CFA)
- Single-tap (1X-1Y) progressive-scan
Line-scan cameras and contact imaging sensors:
- Grayscale and color RGB

Camera pixel formats supported

Mono8, Mono10, Mono12, Mono14, Mono16
BayerXX8, BayerXX10, BayerXX12, BayerXX14, BayerXX16 where XX = GR, RG, GB, or BG
RGB8, RGB10, RGB12, RGB14, RGB16
RGBA8, RGBA10, RGBA12, RGBA14, RGBA16
YCbCr601_422_8, YCbCr601_422_10
YCbCr709_422_8, YCbCr709_422_10
YUV422_8, YUV422_10
Raw

Area-scan camera control

Trigger

Precise control of asynchronous reset cameras, with exposure control.
Support of camera exposure/readout overlap.
Support of external hardware trigger, with optional delay and trigger decimation.

Strobe

Accurate control of the strobe position for strobed light sources.
Support of early and late strobe pulses.

Line-scan camera control

Scan/page trigger

Precise control of start-of-scan and end-of-scan triggers.
Support of external hardware trigger, with optional delay.
Support of infinite acquisition, without missing line, for web inspection applications.

Line trigger

Support for quadrature motion encoders, with programmable noise filters, selection of acquisition direction and backward motion compensation.
Rate Converter tool for fine control of the pixel aspect ratio: Rate Conversion Ratio in the range 0.001 to 1000 with an accuracy better than 0.1%.
Rate Divider tool

Line strobe

Accurate control of the strobe position for strobed light sources.

On-board processing

On-board memory

4 GB

Image data stream processing

Unpacking of 10-/12-/14-bit to 16-bit with selectable justification to LSb or MSb
Optional swap of R and B components
Little endian conversion

Flat-field correction

Input LUT (Lookup Table)

Monochrome 8-bit to 8-bit transformation
Monochrome 10-bit to 8-, 10- or 16-bit transformations
Monochrome 12-bit to 8-, 12- or 16-bit transformations

Bayer CFA to RGB decoder

'1-camera' firmware variant:

3x3 linear interpolation method
3x3 median-based interpolation method

Pixel binning

CustomLogic firmware variants

Data stream statistics

Measurement of:
- Frame rate (Area-scan only)
- Line rate
- Data rate
Configurable averaging interval

Event signaling and counting

The application software can be notified of the occurrence of various events:
- Standard event: the EVENT_NEW_BUFFER event notifies the application of newly filled buffers
- A large set of custom events
Custom events sources:
- I/O Toolbox events
- Camera and Illumination control events
- CoaXPress data stream events
- CoaXPress host interface events
Each custom event is associated with a 32-bit counter that counts the number of occurrences
The last three 32-bit context data words of the event context data can be configured with event-specific context data:
- Event-specific data
- State of all System I/O lines sampled at the event occurrence time
- Value of any event counter

Metadata Insertion

Recording of metadata beside image data.

The metadata are composed with a configurable set of general purpose event counters, quadrature encoder position counters and/or I/O line status.
Line metadata are captured every acquired image line.
Buffer metadata are only captured when the first image line of a buffer is acquired.
Allows line-scan applications to correlate image data with system events including motion encoder positions.

NOTE: Only available on selected line-scan firmware variants. Refer to release notes.

General Purpose Inputs and Outputs

Number of lines

20 I/O lines:

4 differential inputs (DIN)
4 singled-ended TTL inputs/outputs (TTLIO)
8 isolated inputs (IIN)
4 isolated outputs (IOUT)

NOTE: The number of I/O lines can be extended using I/O modules attached to the I/O EXTENSION connector.

Usage

Any I/O input lines can be used by any LIN tool of the I/O Toolbox
Selected pairs of I/O input lines can be used by any QDC tool of the I/O toolbox to decode A/B signals of a motion encoder

Electrical specifications

DIN: High-speed differential inputs, up to 5 MHz, compatible with ANSI/EIA/TIA-422/485 differential line drivers and complementary TTL drivers
TTLIO: High-speed 5V-compliant TTL inputs or LVTTL outputs, compatible with totem-pole LVTTL, TTL, 5V CMOS drivers or LVTTL, TTL, 3V CMOS receivers
IIN: 200 kHz isolated current-sense input with wide voltage input range up to 30V, compatible with totem-pole (push-pull) HTL drivers, 5V TTL/RS-422 differential line drivers, 5V CMOS drivers, potential free contacts, solid-state relays and opto-couplers
IOUT: Isolated contact outputs compatible with 30V / 100mA loads

NOTE: IIN and IOUT lines provide a functional isolation grade for the circuit technical protection. It does not provide an isolation that can protect a human being from electrical shock!

Filter control

Glitch removal filter available on all System I/O input lines
Configurable filter time constants:
- for DIN and TTLIO lines: 50 ns, 100 ns, 200 ns, 500 ns, 1 µs
- for IIN lines: 500 ns, 1 µs, 2 µs, 5 µs, 10 µs

Polarity control

Yes

Power output

Non-isolated, +12V, 1A, with electronic fuse protection

I/O Toolbox tools

The I/O Toolbox is a configurable interconnection of tools that generates events (usually triggers):

Line Input tool (LIN): edge detector delivering events on rising or falling edges of any selected input line.
Quadrature Decoder tool (QDC): a composite tool including:
- A quadrature edge detector delivering events on selected transitions of selected pairs of input lines.
- An optional backward motion compensator for clean line-scan image acquisition when the motion is unstable.
- A 32-bit up/down counter for delivering a position value.
Device Link Trigger tool (DLT): delivers an event on reception of a valid high-speed CoaXPress 2.0 connection trigger packet message from the remote device.
User Actions Scheduler tool (UAS): to delegate the execution of 'User Actions' at a scheduled time or encoder position. Possible user actions include setting low/high/toggle any bit of the User Output Register or generation of any User Events.
Delay tool (DEL): to delay up to 16 events from one or two I/O toolbox event sources, by a programmable time or number of motion encoder ticks (any QDC events).
Divider tool (DIV): to generate an event every nth input events from any I/O toolbox event source.
Multiplier/divider tool (MDV): to generate m events every d input events from any I/O toolbox event source.
The 'Input Tools' (LIN, QDC, DLT and UAS) can be further processed by the 'Event Tools' (DEL, DIV and MDV) to generate any of the following "trigger" events:
- The "cycle trigger" of the Camera and Illumination controller
- The "cycle sequence trigger" of the Camera and Illumination controller
- The "start-of-scan trigger" of the Acquisition Controller (line-scan only)
- The "end-of-scan trigger" of the Acquisition Controller (line-scan only)

I/O Toolbox composition

Determined by the selected firmware variant:

'1-camera': 8 LIN, 1 QDC, 2 DLT, 1 UAS, 2 DEL, 1 DIV, 1 MDV, 2 C2C
'1-camera, line-scan': 8 LIN, 1 QDC, 2 DLT, 1 UAS, 2 DEL, 1 DIV, 1 MDV, 3 C2C

C2C-Link

Description

Accurate synchronization of the trigger and the start-of-exposure of multiple grabber-controlled area-scan cameras.
Accurate synchronization of the start-of-cycle, start-of-scan and end-of-scan of multiple grabber-controlled line-scan cameras.

Specification

C2C-Link synchronizes cameras connected to:
- the same card
- to different cards in the same PC (requires an accessory cable such as the "3303 C2C-Link Ribbon Cable" or a custom-made C2C-Link cable)
- to different cards in different PCs (requires one "1636 InterPC C2C-Link Adapter" for each PC and one RJ 45 CAT 5 STP straight LAN cable for each adapter but the last one)
Maximum distance:
- 60 cm inside a PC
- 1200 m cumulated adapter to adapter cable length
Maximum trigger rate:
- 2.5 MHz for configurations using a single PC, or up to 10 PCs and 100 m total C2C-Link cable length
- 200 kHz for configurations up to 32 PCs and 1200m total C2C-Link cable length
Trigger propagation delay from master to slave devices:
- Less than 10 ns for cameras on the same card or on different cards in the same PC
- Less than 265 ns for cameras on different cards in different PCs (3 PCs and 40m total C2C-Link cable length)

Electrical

Supply voltage

24 V DC (tolerance. TBD), via external power supply block (not included)

Power connector

POWER IN connector: 2-pin 5.08 mm pluggable terminal block socket

Power consumption

29 W for internal use (estimation TBC)
4 x 17 W for PoCXP

Software

Host PC Operating System

Microsoft Windows 11, 10, 8.1, 7 for x86-64 (64-bit) processor architecture
Linux for x86-64 (64-bit) and AArch64 (64-bit) processor architectures
macOS for x86-64 (64-bit) and AArch64 (64-bit) processor architectures

APIs

EGrabber class, with C++ and .NET APIs: .NET assembly designed to be used with development environments compatible with .NET frameworks version 4.0 or higher
GenICam GenTL producer libraries compatible with C/C++ compilers:
- 'x86_64' dynamic library designed to be used with ISO-compliant C/C++ compilers for the development of x86-64 (64-bit) applications
- 'aarch64' dynamic library designed to be used with ISO-compliant C/C++ compilers for the development of AArch64 (64-bit) applications

Environmental conditions

Operating ambient air temperature

0 °C to +55 °C / +32 °F to +131 °F

0 °C to +50 °C / +32 °F to +122 °F (TBC)

Operating ambient air humidity

10% to 90% RH non-condensing

10% to 90% RH non-condensing (TBC)

Storage ambient air temperature

-20 °C to +70 °C/ -4 °F to +158 °F

-20 °C to +70 °C/ -4 °F to +158 °F (TBC)

Storage ambient air humidity

10% to 90% RH non-condensing

10% to 90% RH non-condensing (TBC)

Certifications

Electromagnetic - EMC standards

European Council EMC Directive 2014/30/EU
United States FCC rule 47 CFR 15

European Council EMC Directive 2014/30/EU
United States FCC rule 47 CFR 15

EMC - Emission

EN 55032:2015 / CISPR 32:2012 Class B
FCC 47 Part 15 Class B

EN 55032:2015 / CISPR 32:2012 Class A
FCC 47 Part 15 Class A

EMC - Immunity

EN 55035:2017 / CISPR 35:2016
EN 61000-6-2:2005 / IEC 61000-6-2:2016
EN 61000-4-2:2009
EN 61000-4-3:2006
EN 61000-4-4:2004
EN 61000-4-6:2014

TBD

KC Certification

Korean Radio Waves Act, Article 58-2, Clause 3

Flammability

PCB compliant with UL 94 V-0

RoHS

European Union Directive 2015/863 (ROHS3)

REACH

European Union Regulation 1907/2006

WEEE

Must be disposed of separately from normal household waste and must be recycled according to local regulations

Ordering Information

Product code - Description

3625 - Coaxlink QSFP+

3629 - Coaxlink CXP-12 to QSFP+ Converter

Optional accessories

电子制造业的机器视觉

用于AOI、3D SPI、3D铅/球检测机的高速图像采集。

Coaxlink 和 Grablink 卡是可靠的工业图像采集卡，从最快的数码相机提供强大和稳定的图像采集。它们的特点是精确的相机控制和同步功能。

AOI（自动光学检测）机
3D SPI（锡膏检测）机
3D 引线/球型检查机

关联产品

Camport CL2GigE , Coaxlink Duo CXP-12 , Coaxlink Mono CXP-12 LH , Coaxlink Octo , Coaxlink Quad CXP-12 , Coaxlink Quad CXP-12 , Coaxlink Quad CXP-12 DF , Coaxlink Quad CXP-12 Value , Coaxlink Quad G3 , Coaxlink Quad G3 DF , Coaxlink Quad G3 LH , Grablink Base , Grablink DualBase , Grablink Duo , Grablink Full , Grablink Full XR

极高分辨率线扫描图像采集，用于平板显示器检测和太阳能电池检测

Coaxlink 和 Grablink 卡是可靠的工业图像采集卡，从最快的数码相机提供强大和稳定的图像采集。它们的特点是精确的线扫描相机控制和同步功能。

关联产品

标记检验

关联产品

Coaxlink Duo CXP-12 , Coaxlink Mono CXP-12 LH , Coaxlink Quad CXP-12 , Coaxlink Quad CXP-12 , Coaxlink Quad CXP-12 Value , Deep Learning Bundle , EasyClassify , EasyLocate , EasyMatrixCode , EasyQRCode , EasySegment

用于电子检测机的3D图像采集

关联产品

Coaxlink Quad 3D-LLE

一般制造业的机器视觉

用于检查机的高帧率图像采集

玻璃检测：瓶、小瓶

关联产品

表面检测机的线扫描图像采集

Coaxlink 和 Grablink 卡是可靠的工业图像采集卡，从最快的数码相机提供强大和稳定的图像采集。它们的特点是精确的线扫描相机控制和同步功能。

关联产品

用于纺织品检测的线扫描图像采集

Coaxlink 和 Grablink 卡是可靠的工业图像采集卡，从最快的数码相机提供强大和稳定的图像采集。它们的特点是精确的线扫描相机控制和同步功能。

关联产品

机器人图像采集

关联产品

Coaxlink Duo CXP-12 , Coaxlink Mono CXP-12 LH , Coaxlink Octo , Coaxlink Quad CXP-12 , Coaxlink Quad CXP-12 , Coaxlink Quad CXP-12 DF , Coaxlink Quad CXP-12 Value , Coaxlink Quad G3 , Coaxlink Quad G3 DF , Coaxlink Quad G3 LH

用于检测机的3D图像采集

关联产品

Coaxlink Quad 3D-LLE

印刷业的机器视觉

用于印刷检查机的高速线扫描图像采集

包装打印检查
标签打印检查

关联产品

视频采集和录制

用于运动分析和记录的高帧速率视频采集

关联产品

Camport CL2GigE , Coaxlink Duo CXP-12 , Coaxlink Mono CXP-12 LH , Coaxlink Octo , Coaxlink Quad CXP-12 , Coaxlink Quad CXP-12 , Coaxlink Quad CXP-12 DF , Coaxlink Quad CXP-12 JPEG , Coaxlink Quad CXP-12 JPEG , Coaxlink Quad CXP-12 Value , Coaxlink Quad G3 , Coaxlink Quad G3 DF , Coaxlink Quad G3 LH , Grablink Base , Grablink DualBase , Grablink Duo , Grablink Full , Grablink Full XR

视频监视、监控和安全

通过长距离同轴线缆传输和采集高清视频，进行交通监控、监视和控制

关联产品

Coaxlink Duo CXP-12 , Coaxlink Mono CXP-12 LH , Coaxlink Octo , Coaxlink Quad CXP-12 , Coaxlink Quad CXP-12 , Coaxlink Quad CXP-12 JPEG , Coaxlink Quad CXP-12 JPEG , Coaxlink Quad CXP-12 Value , Coaxlink Quad G3 , Coaxlink Quad G3 LH

Coaxlink 系列