eGrabber 24.06
- eGrabber Gigelink 新增了多播支持,可以实现一对多图像数据流传输。
- Playlink:Euresys 新推出的一种 GenTL 生成器,用于回放记录器中的图像,其效果好比这些图像直接来自远程设备一样。
- 为 Coaxlink 和 Grablink Duo 的数据流 StripeArrangements 增添了新的几何形状和命令。
- 生产力方面实现了多项改进。
- 为 Cognex VisionPro 软件增添了 eGrabber 适配器
四路CoaXPress CXP-12到CoaXPress-over-Fiber转换器
© EURESYS S.A. - Subject to change without notice
8/15/2024 Datasheet 四路CoaXPress CXP-12到CoaXPress-over-Fiber转换器
Main benefitsOther benefits规格Mechanical
Camera / video inputs
Electrical
Environmental conditions
Certifications
Ordering Information
Frame grabber / video outputs
Offices
|
CoaXPress (CXP)是业界高带宽计算机视觉应用标准。最新版CoaXPress 2.1规范中规定了CXP-12速度,即通过同轴铜缆进行12.5 Gbps(千兆位每秒)连接。
由于链路聚合在CoaXPress中很常见,因此四路CXP-12连接可以轻松实现50 Gbps (12.5 x 4)的带宽。CoaXPress-over-Fiber是CoaXPress规范的附加部分。它提供了一种通过标准以太网连接(包括光纤)运行未经修改的CoaXPress协议的方法。因此,CoaXPress-over-Fiber使用为以太网设计的标准电子设备、连接器和电缆,但所采用的协议既不是以太网,也不是GigE Vision,而是CoaXPress。
Stand-alone device
Air cooling, fan-cooled heatsink
Aluminum housing
Desktop
'A B C D CAMERA' on front side:
4 x Micro-BNC 75 Ohms coaxial receptacles
CoaXPress Host Interface
'QSFP+ FRAME GRABBER' on rear side:
Enhanced Quad Small Form-factor Pluggable port
CoaXPress-over-Fiber Device Interface
'POWER INPUT' on rear side:
2-pin 5.08mm pitch terminal socket
24 V DC power input
'A', 'B', 'C', 'D' on front panel:
Bi-color red/green LEDs
CoaXPress Host connector indicator
'A', 'B', 'C', 'D' on rear panel:
Bi-color red/green LEDs
CoaXPress-over-Fiber Device connector indicator
'STATUS' on rear panel:
Bi-color red/green LED
FPGA status indicator
'POWER' on rear panel:
Bi-color red/green LED
Board status indicator
L x H x D: 112 mm x 55 mm x 208 mm [4.4 in x 2.2 in x 8.2 in]
Net weight: 776 g [27.4 oz]
Gross weight: 930 g [32.8 oz]
CoaXPress
CoaXPress 1.0, 1.1, 1.1.1 and 2.0
CXP-12
4 connections
PoCXP
Four micro-BNC 75 Ohms (also known as HD-BNC™) CXP-12
One CoaXPress Host connection status LED per connection
Area-scan cameras:
One 1- or 2- or 4-connection camera
Four 1-connection cameras
Line-scan cameras:
One 1- or 2- or 4-connection camera
4
Yes
50 Gbit/s (5,000 MB/s)
1.25 GT/s (CXP-1), 2.5 GT/s (CXP-2), 3.125 GT/s (CXP-3), 5 GT/s (CXP-5), 6.25 GT/s (CXP-6), 10.0 GT/s (CXP-10), and 12.5 GT/s (CXP-12)
Low-speed 20.83... Mbps (CXP-1 to CXP-6)
Low-speed 41.66... Mbps (CXP-10, CXP-12)
1 data stream per camera
16,384 bytes
PoCXP Safe Power:
PoCXP Device detection and automatic power-on
Overload and short-circuit protections
The +24V power source (POWER) must be able to deliver the power required by the converter and camera(s)
24 V DC +/- 3% (23.25 V - 24.25 V), via external power supply (not included)
'POWER' connector on rear side:
2-pin 5.08 mm pluggable terminal block socket
19.5 W for internal use
4 x 17 W for PoCXP
0 °C to +50 °C / +32 °F to +122 °F
10% to 90% RH non-condensing
-20 °C to +70 °C/ -4 °F to +158 °F
10% to 90% RH non-condensing
European Council EMC Directive 2014/30/EU
United States FCC rule 47 CFR 15
CISPR 32:2015 + A1:2019 Class A
EN 55032:2015 + A11:2020 Class A
CISPR 35:2016
EN 55035:2017 + A11:2020
IEC 61000-6-2:2016 / EN 61000-6-2:2019
EN 61000-4-2
EN 61000-4-3
EN 61000-4-4
EN 61000-4-6
Korean Radio Waves Act, Article 58-2, Clause 3
PCB compliant with UL 94 V-0
European Union Directive 2015/863 (ROHS3)
European Union Regulation 1907/2006
Must be disposed of separately from normal household waste and must be recycled according to local regulations
PC3629 Coaxlink CXP-12 to QSFP+ Converter
PC1660 1.8 m IEC Power Cable (EUR)
PC1661 6 ft IEC Power Cable (US)
PC1662 6 ft IEC Power Cable (UK)
PC1676 24V 160W Power Supply Block
CoaXPress-over-Fiber
CXP-over-Fiber Bridge Protocol 1.1
CoF-10
4 connections
50 Gbit/s (5,000 MB/s)
One Enhanced Quad Small Form-factor Pluggable port (QSFP+)
One CoaXPress-over-Fiber Device status LED per connection