Learn more about our product features:

Grablink Express

用于单个基本配置 PoCL Camera Link 相机的图像采集卡

  • 对于 Camera Link Base 配置相机
  • 直接兼容市场上数以百计的 Camera Link 相机
  • 支持 PoCL,通过 Camera Link 供电
  • PCIe x1 总线
  • 32 MB 板载内存
  • 特征丰富的 9 条数字 I/O 线

比较 购买地点

直接兼容市场上数以百计的 Camera Link 相机
直接兼容市场上数以百计的 Camera Link 相机

请查阅«支持的摄像机»(在支持菜单中)以下载相关 Cam 文件。


  • 速率转换器是一个智能的、可编程的倍频器/分频器。
  • 用于运动编码器和线扫描相机,允许用户选择该图像中的像素纵横比。
  • 它提供了一种方法来校准采集链以轻松达到正方形(1:1 纵横比)像素。

通用 I/O 线
通用 I/O 线


提供 Windows 和 Linux 驱动程序
提供 Windows 和 Linux 驱动程序

高性能 DMA(直接存储器存取)
高性能 DMA(直接存储器存取)

  • 直接传送到用户分配的内存
  • 硬件分散 - 聚集支持

Format Standard profile, half length, 1-lane PCI Express card
Cooling method Air-cooling, fanless
Mounting For insertion in a standard height, 1-lane or higher, PCI Express card slot
  • 'CAMERA LINK' on bracket:
    • 26-position Mini Delta Ribbon (MDR) socket
    • Camera Link connector
  • 'SYSTEM' on bracket:
    • 26-pin 3-row high-density male sub-D connector
    • I/O lines and power output
  • 'SYSTEM' on PCB:
    • 26-pin 2-row 0.1" pitch pin header with shrouding
    • I/O lines and power output
  • 'CAMERA POWER INPUT' on module:
    • 4-pin MOLEX power socket
    • 12 VDC power input for PoCL camera
Dimensions L 168 mm x H 111 mm L 6.61 in x 4.37 in
Host bus
Standard PCI Express 1.0
Link width 1 lane
Link speed 2.5 GT/s (PCIe 1.0)
DMA 32-bit
Peak delivery bandwidth 256 MB/s
Effective (sustained) delivery bandwidth 180 MB/s (Host PC motherboard dependent)
Power consumption Max. 5.35 W (500 mA @ +3.3V, 300 mA @ +12V), excluding I/O power output
Camera / video inputs
Interface standard(s) Camera Link
Connectors One Mini Delta Ribbon (MDR) Camera Link (CL)
Number of cameras One Base camera
Maximum aggregated camera data transfer rate 2.04 Gbit/s (255 MB/s)
Camera Link configuration Base
Camera Link clock frequency From 20 MHz up to 85 MHz
PoCL (Power over Camera Link) One PoCL SafePower compliant controller with overload, over-voltage and short-circuit protection
Camera types
  • Grayscale and color (RGB and Bayer) cameras
  • Area-scan and line-scan cameras
Video delivery
Raw video format(s)
  • Monochrome formats: Y8, Y10, Y12, Y14, Y16
  • Packed RGB color formats: RGB24, RGB32
  • Planar RGB color formats: RGB24PL, RGB30PL, RGB36PL, RGB42PL, RGB48PL
  • Additional formats: BAYER8, BAYER10, BAYER12, BAYER14, BAYER16, RAW8, RAW10, RAW12, RAW14, RAW16
On-board processing
On-board memory 32 MB (16 MB for image data)
Image data stream processing
  • Unpacking of 10-/12-/14-bit to 16-bit with selectable justification to LSb or MSb
General Purpose Inputs and Outputs
Number of lines 9 I/O lines:
  • 4 TTL input/output lines (ENHANCED I/O)
  • 2 differential inputs (TRA1, TRA2)
  • 1 isolated output (STA)
  • 2 multimode input/output lines (ISOA1, ISOA2)
  • Camera and image acquisition trigger
  • Light strobe trigger
  • Camera synchronization using motion encoder
  • General purpose IO
Electrical specifications
  • ISOA1, ISOA2: Inputs or outputs, isolated up to 500 V:
    • Input: compatible with TTL or 12V signals
    • Output: TTL, open-collector or open-emitter
  • TRA1, TRA2: Inputs compatible with TTL, LVTTL, differential LVDS, differential RS-422, differential RS-485 signals, protected against electrostatic discharge, with choke for the rejection of common-mode noise
  • STA: Opto-isolated outputs, compatible with signals up to 60V, with 3 µs fall time, isolated up to 500V
  • ENHANCED IO Inputs or outputs compatible with TTL signals, protected against electrostatic discharge, with high-frequency noise filter
Filter control
  • Glitch removal filter available on input lines used as trigger sources:
  • Configurable with five time constants:
    • 100 ns, 500 ns and 2.5 µs for trigger/ page trigger /page end trigger sources
    • 100 ns, 500 ns, 2.5 µs for line trigger source
Power output
  • Non-isolated +5V, 1A and +12V, 500 mA with self-resettable fuse protection
  • Isolated +5V 250 mA with electronic fuse protection
Host PC Operating System
  • Microsoft Windows 10, 8.1, 7 for x86 (32-bit) and x86-64 (64-bit) processor architectures
  • Linux for x86 (32-bit) and x86-64 (64-bit) processor architectures
Refer to release notes for details
  • MultiCam 32- and 64-bit binary libraries (Windows and Linux), for ISO-compliant C/C++ compilers
Environmental conditions
Operating ambient air temperature 0 to +50 °C / +32 to +122 °F
Operating ambient air humidity 10 to 90% RH non-condensing
Storage ambient air temperature -20 to +70 °C/ -4 to +158 °F
Storage ambient air humidity 10% to 90% RH non-condensing
Electromagnetic - EMC standards
  • European Council EMC Directive 2004/108/EC
  • United States FCC rule 47 CFR 15
EMC - Emission
  • EN 55022:2010 Class B
  • FCC 47 Part 15 Class B
EMC - Immunity
  • EN 55024:2010 Class B
  • EN 61000-4-2
  • EN 61000-4-3
  • EN 61000-4-4
  • EN 61000-4-6
Flammability PCB compliant with UL 94 V-0
RoHS European Union Directive 2015/863 (ROHS3)
REACH European Union Regulation 1907/2006
WEEE Must be disposed of separately from normal household waste and must be recycled according to local regulations
Ordering Information
Product code - Description
HS Acquisition

用于AOI、3D SPI、3D铅/球检测机的高速图像采集。

Coaxlink 和 Grablink 卡是可靠的工业图像采集卡,从最快的数码相机提供强大和稳定的图像采集。它们的特点是精确的相机控制和同步功能。
  • AOI(自动光学检测)机
  • 3D SPI(锡膏检测)机
  • 3D 引线/球型检查机
LS Acquisition Elec


Coaxlink 和 Grablink 卡是可靠的工业图像采集卡,从最快的数码相机提供强大和稳定的图像采集。它们的特点是精确的线扫描相机控制和同步功能。
LS Acquisition Man


Coaxlink 和 Grablink 卡是可靠的工业图像采集卡,从最快的数码相机提供强大和稳定的图像采集。它们的特点是精确的线扫描相机控制和同步功能。
LS Acquisition Textile


Coaxlink 和 Grablink 卡是可靠的工业图像采集卡,从最快的数码相机提供强大和稳定的图像采集。它们的特点是精确的线扫描相机控制和同步功能。