| Mechanical |
| Housing |
Aluminum housing |
| Mounting |
Short and long brackets included in order to fit all 19-in racks |
| Dimensions |
L 433.20 mm x H 43.7 mm x D 203 mm without brackets
L 482.61 mm x H 43.7 mm x D 203 mm with brackets
(Excluding cable connector plugs) |
| Weight |
2.88 kg, 6.35 lb, without option modules and without brackets
Add 50 g, 0.11 lb, for long brackets
Add 100 g, 0.22 lb,for Cooling module option
Add 20 g, 0.044 lb, for each Audio Module option |
| Camera / video inputs |
| Interface standard(s) |
SDI for HD digital video |
| Connectors |
- MODULE A - INPUT1 to INPUT 4: 4x BNC female connectors on the rear panel
- MODULE B - INPUT1 to INPUT 4: 4x BNC female connectors on the rear panel
|
| Formats and standards (HD) |
- 720p (SMPTE 296M)
- 1080p (SMPTE 274M) (progressive scan only)
|
| Video inputs |
2 x 4 HD-SDI (SMPTE 292M) / HDcctv 1.0 |
| Native resolution |
- 720p: 1280 x 720
- 1080p: 1920 x 1080
|
| Frame rate |
- 720p: 23.98, 24, 25, 29.97, 30, 50, 59.94, 60 fps
- 1080p: 23.98, 24, 25, 29.97, 30 fps
|
| Event reporting |
Video signal presence and video format change detected |
| Video presence indicators |
8 green LEDs on front panel |
| Number of cameras |
8 |
| Audio modules |
| Specification |
Up to four optional audio modules can be fitted inside Picolo.net HD8R
- Audio modules must be ordered with the Picolo.net HD8R and are installed in factory
- The specifications below apply to one module
|
| Audio inputs |
| Number of inputs |
2 |
| Type |
Mono line-level analog input |
| Sampling rate |
Fixed, 48 kHz |
| Audio format |
- PCM G.711: mono, 8-bit, 8 kHz, mu-law
- Linear PCM: mono, 16-bit, 48 kHz
|
| Time stamping resolution |
11.1 microseconds (90 kHz time clock) |
| Connectors |
- MODULE A - AUDIO INPUTS 1 to 4: 4 x TRS 3.5 mm jack socket connectors on the front panel
- MODULE B - AUDIO INPUTS 1 to 4: 4 x TRS 3.5 mm jack socket connectors on the front panel
|
| Audio outputs |
| Number of outputs |
2 |
| Type |
Mono line-level analog outputs |
| Audio format |
PCM G.711: mono, 8-bit, 8 kHz, mu-law |
| Time stamping resolution |
11.1 microseconds (90 kHz time clock) |
| On-board video codec |
| Video encoders |
AVC (H.264) Baseline, Main or High profile
- 2 x 12 H.264 encoders per Picolo.net HD4 device
- The cumulated encoding power cannot exceed the equivalent of 12 x 1080p30 video streams encoding
|
| Number of streams |
Up to 3 individually-configurable encoded streams per video input |
| Video stream control |
Frame rate, resolution, bit rate |
| Bitrate |
CBR, VBR |
| Video streams resolution |
- 1920 x 1080, Full HD, native for 1080p sources
- 1280 x 720, HD720, native for 720p sources
- 960 x 540, qHD
- 640 x 360, fits within a VGA display
- 480 x 270
- 320 x 180, fits within a QVGA display
- 320 x 240
|
| MJPEG encoding performance |
1 frame per second |
| Latency |
- 83 ms wire to wire, with 1080p30 video
(With Picolo.net LLD2 decoder. Time measured from encoder input to decoder output) |
| Streaming |
| Media transport protocol |
RTP, RTCP |
| Media transport control protocol |
RTSP for RTP streams
TCP for RTSP streams
SAP protocol (IETF RFC 2974) for multicast |
| RTP transport modalities |
- RTP over UDP Unicast and over UDP Multicast
- RTP interleaved in RTSP over HTTP
- RTP Transport Media Types
- RTP Payload Format for H.264 Video
- RTP Payload Format for MJPEG Video
|
| Network |
| LAN interface |
2 x Ethernet 10BASE-T/100BASE-TX/1000BASE-T, automatic speed negotiation |
| LAN connector |
2 x RJ45 with link and activity LED indicators |
| Application layer protocols |
DHCP, DNS, HTTP, HTTPS, NTP, RTCP, RTP, RTSP, TLS 1.0, SAP |
| Transport layer protocols |
TCP, UDP |
| Internet layer protocols |
IPv4, ICMP, IGMPv2 |
| IP address allocation methods |
DHCP, LLA, Static IP |
| Number of IP address/MAC address |
1 |
| User authentication and access policy |
| HTTP and RTSP authentication |
Using the "HTTP Digest Authentication" mechanism |
| WS authentication |
Using the WS-Security "Username Token" mechanism, with the "Password Digest" password type |
| Web pages |
Through login/password dialog box |
| Encryption mechanisms |
| Web service |
Messages encryption using TLS 1.0 |
| HTTPS web pages |
Access encryption using TLS 1.0 |
| Standard and proprietary APIs |
| Proprietary web services |
For advanced use |
| Maintenance client interface |
To backup and restore configurations, to remotely reboot and upgrade the embedded firmware |
| Web pages |
For easy installation, set up and testing |
| System integration |
| Alarm inputs |
2 x 4 non-isolated polarity insensitive inputs for closing contacts or electronic sensor with CMOS digital outputs |
| Alarm inputs connectors |
Removable plugs with push-in terminals |
| Relay outputs |
2 x 4 potential-free normally open contacts |
| Relay outputs connectors |
Removable plugs with push-in terminals |
| COM |
Two bidirectional half-duplex RS-485 COM ports for the control of up to 8 Pelco-D compliant PTZ cameras |
| COM connector |
Removable plug with push-in terminals |
| Pan/Tilt/Zoom protocol |
Pelco D |
| Watchdog |
Yes |
| Electrical |
| Supply voltage |
10 to 30 V DC, power supply via external unit |
| Power connector |
2x removable plugs with 2 push-in terminals |
| Power consumption |
30 W typical |
| Power status |
2x "Power OK" green LEDs on rear panel |
| Environmental conditions |
| Operating ambient air temperature |
Without Cooling Module option:
- One device alone or at least 2 U gap between devices: 0 °C to +65 °C, +32 °F to +149 °F
- Stack of devices with at least 1 U space in-between: 0 °C to +55 °C, +32 °F to +131 °F
- Stack of 3 devices without space in-between: 0 °C to +45 °C, +32 °F to +113 °F
- Stack of any number of devices without space in-between: 0 °C to +35 °C, +32 °F to +95 °F
With Cooling Module option:
- Stack of devices with at least 1 U space in-between: 0 °C to +75 °C, +32 °F to +167 °F
- Stack of 3 devices without space in-between: 0 °C to +75 °C, +32 °F to +167 °F
- Stack of any number of devices without space in-between: 0 °C to +70 °C, +32 °F to +158 °F
|
| Operating ambient air humidity |
10% to 90% RH non-condensing |
| Storage ambient air temperature |
-20 °C to +70 °C/ -4 °F to +158 °F |
| Storage ambient air humidity |
10% to 90% RH non-condensing |
| Dissipated power |
- At 25°C ambient temperature: 102 BTU/h, 30 W (measured with H.264 encoder at full workload)
- At maximum operating ambient temperature: 116 BTU/h, 34 W (measured with H.264 encoder at full workload)
|
| Certifications |
| Electromagnetic - EMC standards |
- European Council EMC Directive 2004/108/EC
- United States FCC rule 47 CFR 15
|
| EMC - Emission |
- EN 55022:2010 Class A
- FCC 47 CFR 15 Class A
|
| EMC - Immunity |
- EN 61000-4-3
- EN 61000-4-4
- EN 61000-4-5
- EN 61000-4-6
- EN 61000-4-11
|
| Flammability |
PCB compliant with UL 94 V-0 |
| RoHS |
European Union Directive 2015/863 (ROHS3) |
| REACH |
European Union Regulation 1907/2006 |
| WEEE |
Must be disposed of separately from normal household waste and must be recycled according to local regulations |
| Ordering Information |
| Product code - Description |
|
| Optional accessories |
|