<a href="https://www.euresys.com/ecco">ECCO+ / ECCO</a>: Extended Camera Link Cable Operation
ECCO+ / ECCO: Extended Camera Link Cable Operation

  • 최대 20m의 장거리 Camera Link 케이블 사용 가능!
  • 자세히 알아 보려면 이 문서를 다운로드하세요


고성능 DMA(Direct Memory Access)
고성능 DMA(Direct Memory Access)

  • Direct transfer into user-allocated memory and hardware boards that expose PCI addresses
  • 하드웨어 분산-수집(scatter-gather) 지원
  • 64비트 주소 지정 기능


라인 스캔 트리거 기능

  • Grablink 프레임 그래버는 모션 인코더에서 받은 신호에 따라 카메라 스캔 레이트를 제어합니다. 부품이 빠르게 움직일수록 카메라 캡처 라인 레이트가 증가합니다. 반대로, 부품이 느리게 움직일수록 카메라 캡처 라인 레이트가 감소합니다.
  • Grablink 보드는 쿼드러처 모션 인코더에서 나오는 A/B 신호를 해석하여 부품이 이동하는 방향(전방 또는 후방)을 파악합니다.
  • 옵션으로 물체가 앞쪽으로 이동할 때만, 또는 뒤쪽으로 이동할 때만 Grablink에서 라인 캡처를 수행하도록 지시할 수도 있습니다.
  • 역방향 동작이 감지될 때 영상 캡처를 중단하는 '역방향 동작 제거' 기능이 있습니다. 동작이 다시 순방향으로 진행되면 캡처가 중단된 지점에서 라인 캡처가 자동으로 재개됩니다.
  • 레이트 컨버터는 모션 인코더의 해상도보다 낮거나 높은 임의의 프로그래밍 가능한 해상도로 카메라가 라인을 캡처하도록 하는 기능입니다. 이 기능은 애플리케이션 개발 과정에서 설계자에게 놀라운 자유도와 유연성을 제공합니다.
  • 레이트 디바이더는 모션 인코더의 해상도보다 낮은 해상도로 카메라가 라인을 캡처하도록 하는 기능입니다. 이 기능은 입력되는 인코더 신호의 주파수를 프로그래밍 가능한 정수로 분할합니다.


현재 시판되는 수백 가지 Camera Link 카메라와 직접 호환
현재 시판되는 수백 가지 Camera Link 카메라와 직접 호환

해당 CAM 파일을 다운로드하려면 카메라 호환성 페이지(지원 메뉴 아래)를 확인하십시오


영역 스캔 트리거 기능

  • 트리거는 일부분이 위치에 들어 왔을 때 캡처를 시작하는 데 사용됩니다. 하드웨어 트리거는 Grablink의 I/O 라인에서 제공됩니다. 소프트웨어 트리거는 애플리케이션에서 제공됩니다.
  • 옵션 트리거 지연을 사용하여 프로그래밍 가능한 시간 동안 캡처를 연기할 수 있습니다.
  • 트리거 제거 기능은 일부 트리거를 무시하는 기능입니다.
  • 카메라 노출 제어 기능을 사용하면 애플리케이션에서 카메라의 노출 시간을 제어할 수 있습니다.
  • 캡처가 시작되면 적절한 시점에 Grablink 보드가 출력 라인 중 하나에 연결된 조명 장치를 제어하기 위한 신호를 생성합니다.


속도 변환기를 포함하여 유연하게 운용 가능한 라인 스캔 카메라

  • 레이트 컨버터는 프로그래밍 가능한 스마트 주파수 체배기/분할기입니다.
  • 모션 인코더 및 라인 스캔 카메라와 함께 사용하면 사용자가 이미지 내 픽셀의 종횡비를 선택할 수 있습니다.
  • 정사각형(가로세로 비율 1:1) 픽셀을 손쉽게 확보하도록 캡처 체인을 조정할 수 있는 방법을 제공합니다.


범용 IO 라인
범용 IO 라인

광범위한 센서 및 모션 인코더와 호환:


라인 스캔 트리거 기능

Grablink는 연속 웹 스캔 기능(단 하나의 라인도 놓치지 않고 연속적으로 이동하는 무한 표면 검사)과 이산 물체 스캔 기능(카메라 전방에서 움직이는 물체의 이미지 캡처)을 지원합니다.

  • 트리거는 일부분이 위치에 들어 왔을 때 캡처를 시작하는 데 사용됩니다. 하드웨어 트리거는 보드의 I/O 라인에서 제공됩니다. 소프트웨어 트리거는 애플리케이션에서 제공됩니다.
  • 기능을 시작한 후의 캡처 대상:
    • 무한히 계속 진행(웹 검사 애플리케이션용)
    • 프로그래밍 가능한 라인 수에 대해 계속 진행(길이가 파악된 물체의 이미지를 캡처하려는 경우)
    • 종료 트리거가 수신될 때까지 계속 진행(길이가 가변적인 물체의 이미지를 캡처하려는 경우)
  • 옵션 트리거 지연을 사용하여 프로그래밍 가능한 라인 수에 대해 캡처 시작을 연기할 수 있습니다.


Windows 및 Linux 드라이버 제공
Windows 및 Linux 드라이버 제공


목록에서 선택한 제품 비교
 
제품 선택
제품 선택
제품 선택
Mechanical
Form Factor
PCI Express card
PCI Express card
PCI Express card
Format
Standard profile, half length, 4-lane PCI Express card
Standard profile, half length, 4-lane PCI Express card
Standard profile, half length, 4-lane PCI Express card
Cooling method
Air-cooling, passive heatsink
Air-cooling, passive heatsink
Air-cooling, passive heatsink
Mounting
For insertion in a standard height, 4-lane or higher, PCI Express card slot
For insertion in a standard height, 4-lane or higher, PCI Express card slot
For insertion in a standard height, 4-lane or higher, PCI Express card slot
Connectors
  • 'BASE' on bracket:
    • 26-position Shrunk Delta Ribbon (SDR) socket
    • Camera Link Base connector
  • 'MEDIUM/FULL'
    • 26-position Shrunk Delta Ribbon (SDR) socket
    • Camera Link Medium/Full/80-bit connector
  • 'EXTERNAL I/O' on bracket:
    • 26-pin 3-row high-density female sub-D connector
    • I/O lines and power output
  • 'INTERNAL I/O' on PCB:
    • 26-pin 2-row 0.1" pitch pin header with shrouding
    • I/O lines and power output
  • 'POWER INPUT' on module:
    • 4-pin MOLEX power socket
    • 12 VDC power input for PoCL camera and I/O power
  • 'BASE' on bracket:
    • 26-position Shrunk Delta Ribbon (SDR) socket
    • Camera Link Base connector
  • 'MEDIUM/FULL'
    • 26-position Shrunk Delta Ribbon (SDR) socket
    • Camera Link Medium/Full/80-bit connector
  • 'EXTERNAL I/O' on bracket:
    • 26-pin 3-row high-density female sub-D connector
    • I/O lines and power output
  • 'INTERNAL I/O' on PCB:
    • 26-pin 2-row 0.1" pitch pin header with shrouding
    • I/O lines and power output
  • 'POWER INPUT' on module:
    • 4-pin MOLEX power socket
    • 12 VDC power input for I/O
  • 'A' on bracket:
    • 26-position Shrunk Delta Ribbon (SDR) socket
    • Camera Link Camera A
  • 'B' on bracket:
    • 26-position Shrunk Delta Ribbon (SDR) socket
    • Camera Link Camera B
  • 'EXTERNAL I/O' on bracket:
    • 26-pin 3-row high-density female sub-D connector
    • I/O lines and power output
  • 'INTERNAL I/O A on PCB:
    • 26-pin 2-row 0.1" pitch pin header with shrouding
    • I/O lines of camera A and power output
  • 'INTERNAL I/O B on PCB:
    • 26-pin 2-row 0.1" pitch pin header with shrouding
    • I/O lines of camera B and power output
  • 'POWER INPUT' on module:
    • 4-pin MOLEX power socket
    • 12 VDC power input for PoCL cameras and I/O power
Dimensions
L 167.65 mm x H 111.15 mm L 6.6 in x H 4.38 in
L 167.65 mm x H 111.15 mm L 6.6 in x H 4.38 in
L 167.65 mm x H 111.15 mm L 6.6 in x H 4.38 in
Weight
136 g, 4.80 oz
133 g, 4.69 oz
137 g, 4.83 oz
Host bus
Standard
PCI Express 1.0
PCI Express 1.0
PCI Express 1.0
Link width
4 lanes
4 lanes
4 lanes
Link speed
2.5 GT/s (PCIe 1.0)
2.5 GT/s (PCIe 1.0)
2.5 GT/s (PCIe 1.0)
Maximum payload size
1024 bytes
1024 bytes
1024 bytes
DMA
32- and 64-bit
32- and 64-bit
32- and 64-bit
Peak delivery bandwidth
1,024 MB/s
1,024 MB/s
1,024 MB/s
Effective (sustained) delivery bandwidth
  • Up to 833 MB/s for a PCI Express payload size of 256 bytes and 64-bit addressing
  • Up to 844 MB/s for a PCI Express payload size of 256 bytes and 32-bit addressing
  • Up to 754 MB/s for a PCI Express payload size of 128 bytes
  • Up to 833 MB/s for a PCI Express payload size of 256 bytes and 64-bit addressing
  • Up to 844 MB/s for a PCI Express payload size of 256 bytes and 32-bit addressing
  • Up to 754 MB/s for a PCI Express payload size of 128 bytes
  • Up to 833 MB/s for a PCI Express payload size of 256 bytes and 64-bit addressing
  • Up to 844 MB/s for a PCI Express payload size of 256 bytes and 32-bit addressing
  • Up to 754 MB/s for a PCI Express payload size of 128 bytes
Power consumption
Max. 9.9 W; Typ. 8.2 W (1.0 A @ 3.3V;0.41 A @+12V)
Max. 6.9 W; Typ. 5.7 W (0.48 A @ 3.3V;0.34 A @+12V)
Max.7.2 W; Typ. 6.0 W (0.47 A @ 3.3V;0.37 A @+12V)
Camera / video inputs
Interface standard(s)
Camera Link 2.0
Camera Link 2.0
Camera Link 2.0
Connectors
2 Shrunk Delta Ribbon (SDR) Miniature Camera Link (MiniCL)
2 Shrunk Delta Ribbon (SDR) Miniature Camera Link (MiniCL)
2 Shrunk Delta Ribbon (SDR) Miniature Camera Link (MiniCL)
ECCO - Extended Camera Link Cable Operation
ECCO+
ECCO
ECCO
Number of cameras
One 80-bit (10 x 8-bit taps), Full, Medium or Base camera
One 80-bit (10 x 8-bit taps), Full, Medium or Base camera
Two Base or Lite cameras
Line-scan cameras supported
Yes
Yes
Yes
Maximum aggregated camera data transfer rate
6.8 Gbit/s (850 MB/s)
6.8 Gbit/s (850 MB/s)
4.08 Gbit/s (510 MB/s)
Camera Link configuration
Base, Medium, Full, 80-bit (10 x 8-bit taps)
Base, Medium, Full, 80-bit (10 x 8-bit taps)
Base or Lite
Camera Link clock frequency
From 20 MHz up to 85 MHz
From 20 MHz up to 85 MHz
From 20 MHz up to 85 MHz
PoCL (Power over Camera Link)
Two independent PoCL SafePower compliant controllers with overload, over-voltage and short-circuit protections
-
One PoCL SafePower compliant controller with overload, over-voltage and short-circuit protections
Camera types
  • Gray-scale and color (RGB and Bayer) cameras
  • Area-scan and line-scan cameras
  • Gray-scale and color (RGB and Bayer) cameras
  • Area-scan and line-scan cameras
  • Gray-scale and color (RGB and Bayer) cameras
  • Area-scan and line-scan cameras
Camera pixel formats supported
Monochrome, Bayer, and RGB (PFNC names):
  • Mono8, Mono10, Mono12, Mono14, Mono16
  • BayerXX8, BayerXX10, BayerXX12, BayerXX14, BayerXX16 where XX = GR, RG, GB, or BG
  • RGB8, RGB10, RGB12, RGB14, RGB16
Monochrome, Bayer, and RGB (PFNC names):
  • Mono8, Mono10, Mono12, Mono14, Mono16
  • BayerXX8, BayerXX10, BayerXX12, BayerXX14, BayerXX16 where XX = GR, RG, GB, or BG
  • RGB8, RGB10, RGB12, RGB14, RGB16
-
Area-scan camera control
Trigger
  • Precise control of asynchronous reset cameras, with exposure control.
  • Support of camera exposure/readout overlap.
  • Support of external hardware trigger, with optional delay and trigger decimation.
  • Precise control of asynchronous reset cameras, with exposure control.
  • Support of camera exposure/readout overlap.
  • Support of external hardware trigger, with optional delay and trigger decimation.
  • Precise control of asynchronous reset cameras, with exposure control.
  • Support of camera exposure/readout overlap.
  • Support of external hardware trigger, with optional delay and trigger decimation.
Strobe
  • Accurate control of the strobe position for strobed light sources.
  • Support of early and late strobe pulses.
  • Accurate control of the strobe position for strobed light sources.
  • Support of early and late strobe pulses.
  • Accurate control of the strobe position for strobed light sources.
  • Support of early and late strobe pulses.
Line-scan camera control
Scan/page trigger
  • Precise control of start-of-scan and end-of-scan triggers.
  • Support of external hardware trigger, with optional delay.
  • Support of infinite acquisition, without missing line, for web inspection applications.
  • Precise control of start-of-scan and end-of-scan triggers.
  • Support of external hardware trigger, with optional delay.
  • Support of infinite acquisition, without missing line, for web inspection applications.
  • Precise control of start-of-scan and end-of-scan triggers.
  • Support of external hardware trigger, with optional delay.
  • Support of infinite acquisition, without missing line, for web inspection applications.
Line trigger
  • Support for quadrature motion encoders, with programmable noise filters, selection of acquisition direction and backward motion compensation.
  • Rate Converter tool for fine control of the pixel aspect ratio.
  • Rate Divider tool
  • Support for quadrature motion encoders, with programmable noise filters, selection of acquisition direction and backward motion compensation.
  • Rate Converter tool for fine control of the pixel aspect ratio.
  • Rate Divider tool
  • Support for quadrature motion encoders, with programmable noise filters, selection of acquisition direction and backward motion compensation.
  • Rate Converter tool for fine control of the pixel aspect ratio.
  • Rate Divider tool
Line strobe
  • Accurate control of the strobe position for strobed light sources.
  • Accurate control of the strobe position for strobed light sources.
  • Accurate control of the strobe position for strobed light sources.
On-board processing
On-board memory
128 MB (64 MB for image data)
128 MB (64 MB for image data)
128 MB (64 MB for image data)
Image data stream processing
  • Unpacking of 10-/12-/14-bit to 16-bit with selectable justification to LSb or MSb
  • Unpacking of 10-/12-/14-bit to 16-bit with selectable justification to LSb or MSb
  • Unpacking of 10-/12-/14-bit to 16-bit with selectable justification to LSb or MSb
Input LUT (Lookup Table)
  • Monochrome: 8-bit, 10-bit or 12-bit per pixel, up to 1000 MPixel/s
  • RGB: 3x8-bit, 3x10-bit or 3x12-bit per pixel, up to 250 MPixel/s
  • Monochrome: 8-bit, 10-bit or 12-bit per pixel, up to 1000 MPixel/s
  • RGB: 3x8-bit, 3x10-bit or 3x12-bit per pixel, up to 250 MPixel/s
  • Monochrome: 8-bit, 10-bit or 12-bit per pixel, up to 500 MPixel/s per camera
  • RGB: 3x8-bit per pixel, up to 125 MPixel/s per camera
Bayer CFA to RGB decoder
  • Advanced interpolation method using average and median functions on a 3x3 kernel
  • Up to 225 MPixel/s
  • Advanced interpolation method using average and median functions on a 3x3 kernel
  • Up to 225 MPixel/s
  • Advanced interpolation method using average and median functions on a 3x3 kernel
  • Up to 125 MPixel/s per camera
General Purpose Inputs and Outputs
Number of lines
10 I/O lines:
  • 2 differential inputs (DIN)
  • 4 isolated inputs (IIN)
  • 4 isolated outputs (IOUT)
10 I/O lines:
  • 2 differential inputs (DIN)
  • 4 isolated inputs (IIN)
  • 4 isolated outputs (IOUT)
2 sets of 10 I/O lines, each set including:
  • 2 differential inputs (DIN)
  • 4 isolated inputs (IIN)
  • 4 isolated outputs (IOUT)
Usage
  • The input lines can be used by the acquisition channel as:
    • Camera frame trigger source (area-scan only)
    • Acquisition sequence trigger source (area-scan only)
    • Camera line trigger source (line-scan only)
    • Page acquisition trigger source (line-scan only)
    • Page acquisition end trigger source (line-scan only)
    • (Quadrature) motion encoder input (line-scan only)
  • The IOUT 1 output line can be used by the acquisition channel as:
    • Illumination strobe output
  • All the input lines can be used as general purpose inputs
  • All the output lines can be used as general purpose outputs
  • The input lines can be used by the acquisition channel as:
    • Camera frame trigger source (area-scan only)
    • Acquisition sequence trigger source (area-scan only)
    • Camera line trigger source (line-scan only)
    • Page acquisition trigger source (line-scan only)
    • Page acquisition end trigger source (line-scan only)
    • (Quadrature) motion encoder input (line-scan only)
  • The IOUT 1 output line can be used by the acquisition channel as:
    • Illumination strobe output
  • All the input lines can be used as general purpose inputs
  • All the output lines can be used as general purpose outputs
  • Each acquisition channel has a dedicated set of 10 I/O's
    • The I/O set of INTERNAL IO CONNECTOR A is dedicated to the acquisition channel of CAMERA A
    • The I/O set of INTERNAL IO CONNECTOR B is dedicated to the acquisition channel of CAMERA B
  • The input lines of an I/O set can be used by the corresponding acquisition channel as:
    • Camera frame trigger source (area-scan only)
    • Acquisition sequence trigger source (area-scan only)
    • Camera line trigger source (line-scan only)
    • Page acquisition trigger source (line-scan only)
    • Page acquisition end trigger source (line-scan only)
    • (Quadrature) motion encoder input (line-scan only)
  • The IOUT 1 output line of an I/O set can be used by the corresponding acquisition channel, as:
    • Illumination strobe output
  • All the input lines can be used as general purpose inputs
  • All the output lines can be used as general purpose outputs
Electrical specifications
  • DIN: High-speed differential inputs compatible with ANSI/EIA/TIA-422/485 differential line drivers and complementary TTL drivers
  • IIN: Isolated current-sense inputs with wide voltage input range up to 30V, compatible with totem-pole LVTTL, TTL, 5V CMOS drivers, RS-422 differential line drivers, potential free contacts, solid-state relays and opto-couplers
  • IOUT: Isolated contact outputs compatible with 30V / 100mA loads
  • DIN: High-speed differential inputs compatible with ANSI/EIA/TIA-422/485 differential line drivers and complementary TTL drivers
  • IIN: Isolated current-sense inputs with wide voltage input range up to 30V, compatible with totem-pole LVTTL, TTL, 5V CMOS drivers, RS-422 differential line drivers, potential free contacts, solid-state relays and opto-couplers
  • IOUT: Isolated contact outputs compatible with 30V / 100mA loads
  • DIN: High-speed differential inputs compatible with ANSI/EIA/TIA-422/485 differential line drivers and complementary TTL drivers
  • IIN: Isolated current-sense inputs with wide voltage input range up to 30V, compatible with totem-pole LVTTL, TTL, 5V CMOS drivers, RS-422 differential line drivers, potential free contacts, solid-state relays and opto-couplers
  • IOUT: Isolated contact outputs compatible with 30V / 100mA loads
Filter control
  • Glitch removal filter available only on input lines used as trigger sources
  • Configurable with five time constants:
    • 100 ns, 500 ns, and 2.5 µs for trigger / page trigger / page end trigger sources
    • 40 ns, 100 ns, 200 ns, 500 ns, 1 µs, 5 µs, 10 µs for line trigger sources
  • Glitch removal filter available only on input lines used as trigger sources
  • Configurable with five time constants:
    • 100 ns, 500 ns, and 2.5 µs for trigger / page trigger / page end trigger sources
    • 40 ns, 100 ns, 200 ns, 500 ns, 1 µs, 5 µs, 10 µs for line trigger sources
  • Glitch removal filter available only on input lines used as trigger sources
  • Configurable with five time constants:
    • 100 ns, 500 ns, and 2.5 µs for trigger / page trigger / page end trigger sources
    • 40 ns, 100 ns, 200 ns, 500 ns, 1 µs, 5 µs, 10 µs for line trigger sources
Power output
Non-isolated, +5V, 1A and +12V, 1A, with electronic fuse protection
Non-isolated, +5V, 1A and +12V, 1A, with electronic fuse protection
Non-isolated, +5V, 1A and +12V, 1A, with electronic fuse protection
Software
Host PC Operating System
  • Microsoft Windows 10, 8.1, 8, 7 for x86 (32-bit) and x86-64 (64-bit) processor architectures
  • Linux, from kernel version 2.6 to 4.13, compatible with a wide range of distributions, for x86 (32-bit) and x86-64 (64-bit) processor architectures
  • Microsoft Windows 10, 8.1, 8, 7 for x86 (32-bit) and x86-64 (64-bit) processor architectures
  • Linux, from kernel version 2.6 to 4.13, compatible with a wide range of distributions, for x86 (32-bit) and x86-64 (64-bit) processor architectures
  • Microsoft Windows 10, 8.1, 8, 7 for x86 (32-bit) and x86-64 (64-bit) processor architectures
  • Linux, from kernel version 2.6 to 4.13, compatible with a wide range of distributions, for x86 (32-bit) and x86-64 (64-bit) processor architectures
APIs
  • MultiCam 32- and 64-bit binary libraries (Windows and Linux), for ISO-compliant C/C++ compilers
  • MultiCam 32- and 64-bit binary libraries (Windows and Linux), for ISO-compliant C/C++ compilers
  • MultiCam 32- and 64-bit binary libraries (Windows and Linux), for ISO-compliant C/C++ compilers
Memento
Compatible with Memento Event Logging tool
Compatible with Memento Event Logging tool
Compatible with Memento Event Logging tool
Environmental conditions
Operating ambient air temperature
0 to +50 °C / +32 to +122 °F
0 to +50 °C / +32 to +122 °F
0 to +50 °C / +32 to +122 °F
Operating ambient air humidity
10 to 90% RH non-condensing
10 to 90% RH non-condensing
10 to 90% RH non-condensing
Storage ambient air temperature
-20 to +70 °C / -4 to +158 °F
-20 to +70 °C / -4 to +158 °F
-20 to +70 °C / -4 to +158 °F
Storage ambient air humidity
10 to 90% RH non-condensing
10 to 90% RH non-condensing
10 to 90% RH non-condensing
Certifications
Electromagnetic - EMC standards
  • European Council EMC Directive 2004/108/EC
  • United States FCC rule 47 CFR 15
  • European Council EMC Directive 2004/108/EC
  • United States FCC rule 47 CFR 15
  • European Council EMC Directive 2004/108/EC
  • United States FCC rule 47 CFR 15
EMC - Emission
  • EN 55022:2010 Class B
  • FCC 47 Part 15 Class B
  • EN 55022:2010 Class B
  • FCC 47 Part 15 Class B
  • EN 55022:2010 Class B
  • FCC 47 Part 15 Class B
EMC - Immunity
  • EN 55024:2010 Class B
  • EN 61000-4-2
  • EN 61000-4-3
  • EN 61000-4-4
  • EN 61000-4-5
  • EN 61000-4-6
  • EN 55024:2010 Class B
  • EN 61000-4-2
  • EN 61000-4-3
  • EN 61000-4-4
  • EN 61000-4-5
  • EN 61000-4-6
  • EN 55024:2010 Class B
  • EN 61000-4-2
  • EN 61000-4-3
  • EN 61000-4-4
  • EN 61000-4-5
  • EN 61000-4-6
Flammability
PCB compliant with UL 94 V-0
PCB compliant with UL 94 V-0
PCB compliant with UL 94 V-0
RoHS
European Union Directive 2011/65/EU (ROHS2)
European Union Directive 2011/65/EU (ROHS2)
European Union Directive 2011/65/EU (ROHS2)
REACH
European Union Regulation 1907/2006
European Union Regulation 1907/2006
European Union Regulation 1907/2006
WEEE
Must be disposed of separately from normal household waste and must be recycled according to local regulations
Must be disposed of separately from normal household waste and must be recycled according to local regulations
Must be disposed of separately from normal household waste and must be recycled according to local regulations
Ordering Information
Optional accessories
HS Acquisition

AOI, 3D SPI, 3D 리드/볼 검사 기계용 고속 이미지 캡처

Coaxlink 및 Grablink 카드는 시판되는 가장 빠른 디지털 카메라를 통해 안정적이고 신뢰할 수 있는 이미지를 포착하는 신뢰도 높은 산업용 프레임 그래버입니다. 이 제품은 정밀한 카메라 제어와 동기화 기능이 장점입니다.
  • AOI(자동 광학 검사) 기계
  • 3D SPI(솔더 페이스트 검사) 기계
  • 3D 리드/볼 검사 기계
LS Acquisition Elec

평판 디스플레이 검사 및 태양 전지 검사용 초고해상도 라인 스캔 이미지 캡처

Coaxlink 및 Grablink 카드는 시판되는 가장 빠른 디지털 카메라를 통해 안정적이고 신뢰할 수 있는 이미지를 포착하는 신뢰도 높은 산업용 프레임 그래버입니다. 이 제품은 정밀한 라인 스캔 카메라 제어와 동기화 기능이 장점입니다.
HFR Acquisition

검사 기계용으로 높은 프레임 레이트의 이미지 캡처

유리 검사: 병, 약병
LS Acquisition Man

표면 검사 기계용 라인 스캔 이미지 캡처

Coaxlink 및 Grablink 카드는 시판되는 가장 빠른 디지털 카메라를 통해 안정적이고 신뢰할 수 있는 이미지를 포착하는 신뢰도 높은 산업용 프레임 그래버입니다. 이 제품은 정밀한 라인 스캔 카메라 제어와 동기화 기능이 장점입니다.
LS Acquisition Textile

직물 검사용 라인 스캔 이미지 캡처

Coaxlink 및 Grablink 카드는 시판되는 가장 빠른 디지털 카메라를 통해 안정적이고 신뢰할 수 있는 이미지를 포착하는 신뢰도 높은 산업용 프레임 그래버입니다. 이 제품은 정밀한 라인 스캔 카메라 제어와 동기화 기능이 장점입니다.
HS AcquisitionPrinting

인쇄 검사 기계용 고속 라인 스캔 이미지 캡처

  • 패키지 인쇄 검사
  • 레이블 인쇄 검사