Domino 系列

非标模拟相机的图像采集卡

At a glance
  • PCI/PCIe 图像采集卡,用于非标准模拟摄像头
  • 高精度 10 位 40 或 65 MHz A/D 转换器
  • 极低同步抖动的 D³ 技术
  • 支持百万像素逐行扫描和隔行相机、异步复位和曝光控制
  • 触发,闪光及通用 I/O 线
 
Domino Melody

用于单头非标模拟相机的小型图像采集卡

 
Domino Harmony

用于两个单头或一个 RGB 非标模拟相机的图像采集卡

 
Domino Symphony PCIe

用于四个单头非标模拟相机的图像采集卡

通过我们的D³专利技术,您的低成本模拟相机也可以获得数字信号同等的图像质量
通过我们的D³专利技术,您的低成本模拟相机也可以获得数字信号同等的图像质量

  • 极低的噪音、真正的 10 位图像采集
  • 最低的抖动:使用复合视频信号时,对于大多数精确测量,抖动 0.5 纳秒(或 0.008 像素)
  • 无需使用像素时钟


利用市场上最低成本的工业相机
利用市场上最低成本的工业相机


提供 Windows 和 Linux 驱动程序
提供 Windows 和 Linux 驱动程序


通过在列中选择,对产品进行比较
 
选择产品
选择产品
选择产品
Mechanical
Form Factor
PCI card
PCI card
PCI Express card
Format
Low profile, half-length, 32-bit Conventional PCI card
Standard profile, half-length, 64-bit Conventional PCI card
Standard profile, half length, 1-lane PCI Express card
Dimensions
L 168 mm x H 64 mm L 6.6 in x H 2.21 in
L 168 mm x H 107 mm L 6.6 in x H 3.87 in
L 167.65 mm x H 111.15 mm L 6.6 in x H 4.38 in
Weight
-
-
135 g, 4.76 oz
Host bus
Standard
PCI 32-bit, 33 MHz, 3.3 V and 5 V signaling
PCI 64-bit, 66 MHz, 3.3 V and 5 V signaling
PCI Express 1.0
Link width
-
-
1 lane
Link speed
-
-
2.5 GT/s (PCIe 1.0)
DMA
32-bit
32-bit
32-bit
Peak delivery bandwidth
132 MB/s
-
256 MB/s
Effective (sustained) delivery bandwidth
90 MB/s (Host PC motherboard dependent)
240 MB/s (Host PC motherboard dependent)
180 MB/s (Host PC motherboard dependent)
Power consumption
Max. 6.8 W (1.45 A @ +3.3V, 400 mA @ +5V), excluding I/O power output
Max. 6.8 W (1.45 A @ +3.3V, 400 mA @ +5V), excluding I/O power output
Typ. 8.3 W (940 mA @ +3.3V, 430 mA @ +12V), excluding I/O power output
Camera / video inputs
Interface standard(s)
Non-standard Analog
Non-standard Analog
Non-standard Analog
Connectors
  • CAMERA: high-density sub-D 15-pin male connector on the bracket
  • Camera internal: 10-pin shrouded header video connector on the PCB
  • CAMERA X: high-density sub-D 15-pin male connector for video and camera control
  • Camera Y: high-density sub-D 15-pin male connector for video and camera control
  • Video internal: 10-pin shrouded header video connector on the PCB
  • CAMERAS: high-density sub-D 44-pin male connector for video and camera control
  • Internal video: 10-pin shrouded header video connector on the PCB
Termination resistor
Selectable by software
Selectable by software
Selectable by software
Number of cameras
One single-tap camera
  • One or two single-tap cameras
  • One RGB camera
Four single-tap cameras
Number of cameras (at full frame rate)
1
2
4
Line-scan cameras supported
No
No
No
A/D converter
One, 10-bit, 40 MHz
Three, 10-bit, 40 MHz
Four, 10-bit, 65 MHz
Maximum camera line rate
  • 49.5 kHz in synchronous mode
  • 31.5 kHz in asynchronous reset mode
  • 49.5 kHz in synchronous mode
  • 31.5 kHz in asynchronous reset mode
52.5 kHz
On-board processing
On-board memory
16 MB (8 MB for image data)
64 MB (32 MB for image data)
64 MB (32 MB for image data)
Input LUT (Lookup Table)
1 x 8- or 10-bit LUT
-
4 x 8- or 10-bit LUT
General Purpose Inputs and Outputs
Number of lines
4 I/O lines:
  • 1 differential input (TR)
  • 1 opto-isolated output (ST)
  • 2 TTL inputs/outputs (ENHANCED IO)
8 I/O lines:
  • 2 differential inputs (TRX, TRY)
  • 2 opto-isolated outputs (STX, STY)
  • 4 TTL inputs/outputs (ENHANCED IO1..4)
32 I/O lines:
  • 4 contact inputs (Factory I/O: IN)
  • 12 relay outputs (Factory I/O: OUT)
  • 4 TTL inputs/outputs (System: IO)
  • 4 differential inputs (System: TR)
  • 4 opto-isolated outputs (System: ST)
  • 4 full-duplex serial com ports (Camera COM: RX/TX)
Connectors
  • SYSTEM: 8-pin RJ-45 connector on the bracket
  • SYSTEM INTERNAL: 10-pin dual-row 0.1" shrouded header on the PCB
  • CAMERA POWER: 4-pin Molex connector on the PCB for camera powering
  • SYSTEM: 15-pin male sub-D connector on the bracket
  • SYSTEM INTERNAL: 16-pin shrouded header on the PCB
  • POWER: Molex 4-pin connector on the PCB for camera powering
  • EXTERNAL SYSTEM: 26-pin high-density male sub-D connector on the bracket
  • INTERNAL SYSTEM: 26-pin dual-row 0.1" shrouded header on the PCB
  • FACTORY I/O: 34-pin dual-row 0.1" shrouded header on the PCB
  • CAMERA COM: 16-pin dual-row 0.1" shrouded header on the PCB
  • Molex 4-pin connector on the PCB for powering cameras
Usage
  • Camera and image acquisition trigger
  • Light strobe trigger
  • General purpose IO
  • Camera and image acquisition trigger
  • Light strobe trigger
  • General purpose IO
  • Camera and image acquisition trigger
  • Light strobe trigger
  • General purpose IO
Electrical specifications
  • TR: Inputs compatible with TTL, LVTTL, differential LVDS, differential RS-422, differential RS-485 signals, protected against electrostatic discharge, with choke for the rejection of common-mode noise
  • ST: Opto-isolated outputs, compatible with signals up to 60V, with 3 µs fall time, isolated up to 500V
  • ENHANCED IO Inputs or outputs compatible with TTL signals, protected against electrostatic discharge, with high-frequency noise filter
  • TRX, TRY: Inputs compatible with TTL, LVTTL, differential LVDS, differential RS-422, differential RS-485 signals, protected against electrostatic discharge, with choke for the rejection of common-mode noise
  • STX, STY: Opto-isolated outputs, compatible with signals up to 60V, with 3 µs fall time, isolated up to 500V
  • IO: TTL inputs or outputs
  • TR: Inputs compatible with TTL, LVTTL, differential LVDS, differential RS-422, differential RS-485 signals, protected against electrostatic discharge, with choke for the rejection of common-mode noise
  • ST: Opto-isolated outputs, compatible with signals up to 60V, with 3 µs fall time, isolated up to 500V
  • IO: Inputs or outputs compatible with TTL signals, protected against electrostatic discharge, with high-frequency noise filter
  • IN: Polarity-free inputs, compatible with TTL, 12V and 24V signals, opto-couplers, relays and switches
  • OUT: Opto-isolated potential-free and polarity-free solid-state outputs, compatible with signals up to 30V, with 4 µs fall time, isolated up to 500V
  • COM: RS232 asynchronous serial communication lines to control the cameras (exposed to the OS as standard COM ports)
Software
Host PC Operating System
  • Microsoft Windows 10, 8.1, 8, 7 for x86 (32-bit) and x86-64 (64-bit) processor architectures
  • Linux, from kernel version 2.6 to 4.13, compatible with a wide range of distributions, for x86 (32-bit) and x86-64 (64-bit) processor architectures
  • Microsoft Windows 10, 8.1, 8, 7 for x86 (32-bit) and x86-64 (64-bit) processor architectures
  • Linux, from kernel version 2.6 to 4.13, compatible with a wide range of distributions, for x86 (32-bit) and x86-64 (64-bit) processor architectures
  • Microsoft Windows 10, 8.1, 8, 7 for x86 (32-bit) and x86-64 (64-bit) processor architectures
  • Linux, from kernel version 2.6 to 4.13, compatible with a wide range of distributions, for x86 (32-bit) and x86-64 (64-bit) processor architectures
APIs
  • MultiCam 32- and 64-bit binary libraries (Windows and Linux), for ISO-compliant C/C++ compilers
  • MultiCam 32- and 64-bit binary libraries (Windows and Linux), for ISO-compliant C/C++ compilers
  • MultiCam 32- and 64-bit binary libraries (Windows and Linux), for ISO-compliant C/C++ compilers
Environmental conditions
Operating ambient air temperature
0 to +50 °C / +32 to +122 °F
0 to +50 °C / +32 to +122 °F
0 to +50 °C / +32 to +122 °F
Operating ambient air humidity
10 to 90% RH non-condensing
10 to 90% RH non-condensing
10 to 90% RH non-condensing
Storage ambient air temperature
-20 to +70 °C / -4 to +158 °F
-20 to +70 °C / -4 to +158 °F
-20 to +70 °C / -4 to +158 °F
Storage ambient air humidity
10 to 90% RH non-condensing
10 to 90% RH non-condensing
10 to 90% RH non-condensing
Certifications
Electromagnetic - EMC standards
  • European Council EMC Directive 2004/108/EC
  • United States FCC rule 47 CFR 15
  • European Council EMC Directive 2004/108/EC
  • United States FCC rule 47 CFR 15
  • European Council EMC Directive 2004/108/EC
EMC - Emission
  • EN 55022:2010 Class B
  • FCC 47 Part 15 Class B
  • EN 55022:2010 Class B
  • FCC 47 Part 15 Class B
  • EN 55022:2010 Class B
EMC - Immunity
  • EN 55024:2010 Class B
  • EN 61000-4-2
  • EN 61000-4-3
  • EN 61000-4-4
  • EN 55024:2010 Class B
  • EN 61000-4-2
  • EN 61000-4-3
  • EN 61000-4-4
  • EN 55024:2010 Class B
Flammability
PCB compliant with UL 94 V-0
PCB compliant with UL 94 V-0
PCB compliant with UL 94 V-0
RoHS
European Union Directive 2011/65/EU (ROHS2)
European Union Directive 2011/65/EU (ROHS2)
European Union Directive 2011/65/EU (ROHS2)
REACH
European Union Regulation 1907/2006
European Union Regulation 1907/2006
European Union Regulation 1907/2006
WEEE
Must be disposed of separately from normal household waste and must be recycled according to local regulations
Must be disposed of separately from normal household waste and must be recycled according to local regulations
Must be disposed of separately from normal household waste and must be recycled according to local regulations
Ordering Information
Optional accessories
LC Acquisition

用于检测机器的来自工业模拟相机的低成本图像采集

利用好市场上现成的带有 Domino 和 Picolo 系列卡的成本最低的工业相机。