连接最快速最高分辨率的相机来采集图像
连接最快速最高分辨率的相机来采集图像

  • 在同行业中最高的数据采集速率
  • 50 Gbit/s (5,000 MB/s) 带宽(从相机到主机 PC 内存)


使用标准同轴电缆
使用标准同轴电缆

  • 只需一条并不昂贵的电缆,就可完成数据传输、相机控制、触发器和电源供应
  • 顶级的可靠性和灵活性,可在恶劣环境执行


直接GPU传输
直接GPU传输

  • 可提供用于AMD DirectGMA和NVIDIA (CUDA)的样例程序。
  • Direct GPU transfer eliminates unnecessary system memory copies, lowers CPU overhead, and reduces latency, resulting in significant performance improvements in data transfer times for applications.
  • 使用AMD的DirectGMA,可直接将图像数据采集到GPU内存。兼容AMD FirePro W5x00和更高版本以及所有AMD FirePro S系列产品。


区域扫描触发功能

  • 触发器用于在零件就位时启动采集。硬件触发器来自 Coaxlink 的 I/O 线。软件触发器来自于应用程序。
  • 可控的延时触发器,用来控制推迟图像采集的时间点。
  • 触发抽取功能允许跳过某些触发器。
  • 相机曝光控制允许应用来控制相机的曝光时间。
  • 当系统开始采集图像时,Coaxlink采集卡会在一个适当的时间点生成信号来控制连接在输出端的照明设备。


带速率转换器的可控线性扫描操作

  • 速率转换器是一个智能的、可编程的倍频器/分频器。
  • 用于运动编码器和线扫描相机,允许用户选择该图像中的像素纵横比。
  • 它提供了一种方法来校准采集链以轻松达到正方形(1:1 纵横比)像素。


Windows、Linux和macOS驱动程序可用
Windows、Linux和macOS驱动程序可用

  • Including support for Intel 32-bit and 64-bit platforms as well as ARM 64-bit platforms


PCIe 3.0 (Gen 3) x4 / x8 或 PCIe 2.0 (Gen 2) x4 总线
PCIe 3.0 (Gen 3) x4 / x8 或 PCIe 2.0 (Gen 2) x4 总线

  • 高达 6,700 MB/s 的持续总线带宽


坚固的接口
坚固的接口

Coaxlink 使用 DIN 1.0/2.3 连接器,带有推/拉闩锁系统以实现可靠连接


通用 I/O 线
通用 I/O 线

  • 兼容多种传感器和运动编码器。
  • 高速差分输入:正交运动编码器,支持高达 5 MHz。
  • 隔离电流检测输入:接受 5V、12V、24V 信号电压,最高 50 kHZ,各个电隔离高达 500 VAC RMS。
  • 隔离触式输出。
  • 高速 5V 兼容 TTL 输入/LVTTL 输出。


线扫描触发功能

Coaxlink 支持连续滚网扫描(以检查无限、连续移动的表面而不丢失行)和离散的目标扫描(以采集在相机前方移动的目标图像)。

  • 触发器用于在零件就位时启动采集。硬件触发器来自主板 I/O 线。软件触发器来自于应用程序。
  • 启动以后,采集将:
    • 无限进行下去 (用于滚网式监测应用)
    • 继续进行可编程的行数(以采集已知长度的目标图像)
    • 继续进行直至收到结束触发信号(以采集可变长度的目标图像)
  • 可控的延时触发器,用来以可编程的行数推迟开始采集。


Coaxlink 驱动程序包括如下工具:
Coaxlink 驱动程序包括如下工具:

  • Genicam 浏览器:该应用程序提供访问系统中 GenTL Producer 披露的 GenICam 功能。
  • GenTL 控制台:该命令行工具提供访问 Euresys GenTL Producer 披露的功能和命令。


长线缆支持
长线缆支持

  • CXP-6 速度时 40 米 (6.25 Gbps)
  • CXP-3 速度时 100 米 (3 Gbps)


Memento Event Logging Tool

  • Memento 是供 Coaxlink 卡使用的高级开发和调试工具。
  • Memento 记录与相机、图像采集卡及其驱动程序以及应用程序相关的所有事件的准确日志。
  • It provides the developer with a precise timeline of time-stamped events, along with context information and logic analyzer view.
  • 它可以在应用程序开发和调试,以及机器操作期间提供宝贵的协作。


高性能 DMA(直接存储器存取)
高性能 DMA(直接存储器存取)

  • Direct transfer into user-allocated memory and hardware boards that expose PCI addresses
  • 硬件分散 - 聚集支持
  • 64 位寻址能力


线扫描触发功能

  • Coaxlink 图像采集卡根据从运动编码器接收到的信号来控制相机扫描率。如果零件移动速度变快,相机的采集线率将增大。如果零件移动速度变慢,相机的采集线率将减小。
  • Coaxlink 板解读来自正交运动编码器的 A/B 信号,了解零件向哪个方向(向前或向后)移动。
  • 可以选择仅当采集对象向前或者向后移动的时候命令Coaxlink卡进行图像采集。
  • 监测到向后运动时,名为“向后动作取消”的功能即停止采集。当在采集中断位置再次向前运动时,自动恢复行采集。
  • 速率转换器能够让相机以任何低于或高于运动编码器分辨率的可编程分辨率来采集行。这就为设计师在应用程序开发过程中提供了惊人的自由度和灵活度。
  • 速率分割器允许相机采集的图像分辨率高于或低于运动编码器的分辨率,它实现于利用一个可编程的整数倍来对编码器输入信号进行分割。


Compliant with <a href="https://www.euresys.com/genicam">Genicam</a> Including support for
Compliant with Genicam Including support for

  • GenApi
  • 标准功能命名约定(SFNC)
  • GenTL


通过在列中选择,对产品进行比较
 
选择产品
选择产品
选择产品
Mechanical
Form Factor
PCI Express card
PCI Express card
PCI Express card
Format
Standard profile, half length, 8-lane PCI Express card
Standard profile, half length, 8-lane PCI Express card
Standard profile, half length, 4-lane PCI Express card
Cooling method
Air cooling, fan-cooled heatsink
Air cooling, fan-cooled heatsink
Air cooling, fan-cooled heatsink
Mounting
For insertion in a standard height, 8-lane or higher, PCI Express card slot
For insertion in a standard height, 8-lane or higher, PCI Express card slot
For insertion in a standard height, 4-lane or higher, PCI Express card slot
Connectors
  • 'A', 'B', 'C', 'D' on bracket:
    • 4x HD-BNC female connectors
    • CoaXpress host interface
  • EXTERNAL I/O' on bracket:
    • 26-pin 3-row high-density female sub-D connector
    • I/O lines and power output
  • INTERNAL I/O 1' and 'INTERNAL I/O 2' on PCB:
    • 2x 26-pin 2-row 0.1" pitch pin header with shrouding
    • I/O lines and power output
  • 'AUXILIARY POWER INPUT' on module:
    • 6-pin PEG power socket
    • 12 VDC power input for PoCXP camera(s) and I/O power
  • 'C2C-LINK' on module:
    • 6-pin 2-row 0.1-in header
    • Card to card link
  • 'A', 'B', 'C', 'D', 'E', 'F', 'G', 'H' on bracket:
    • 8x DIN 1.0/2.3 female connectors
    • CoaXpress host interface
  • 'INTERNAL I/O' on PCB:
    • 26-pin 2-row 0.1" pitch pin header with shrouding
    • I/O lines and power output
  • 'I/O EXTENSION' on PCB:
    • 26-pin 2-row 0.05" pitch pin header with shrouding
    • I/O extension lines and power output
  • 'AUXILIARY POWER INPUT' on PCB:
    • 6-pin PEG power socket
    • 12 VDC power input for PoCXP camera(s) and I/O power
  • 'C2C-LINK' on PCB:
    • 6-pin 2-row 0.1-in header
    • Card to card link
  • 'A', 'B', 'C', 'D' on bracket:
    • 4x DIN 1.0/2.3 female connectors
    • CoaXpress host interface
  • 'DA', 'DB', 'DC', 'DD' on bracket:
    • 4x DIN 1.0/2.3 female connectors
    • CoaXpress data forwarding interface
  • 'INTERNAL I/O 2' on PCB:
    • 26-pin 2-row 0.1" pitch pin header with shrouding
    • I/O lines and power output
  • 'AUXILIARY POWER INPUT' on module:
    • 6-pin PEG power socket
    • 12 VDC power input for PoCXP camera(s) and I/O
  • 'C2C-LINK' on module:
    • 6-pin 2-row 0.1-in header
    • Card to card link
Lamp indicators
  • 'A', 'B', 'C', 'D' on bracket:
    • 4x bi-color red/green LEDs
    • CoaXPress Host connector indicator lamps
  • 'FPGA STATUS LAMP' on PCB:
    • Bi-color red/green LED
    • FPGA status lamp
  • 'BOARD STATUS LAMP' on PCB:
    • Bi-color red/green LED
  • 'A', 'B', 'C', 'D', 'E', 'F', 'G', 'H' on bracket:
    • 8x bi-color red/green LEDs
    • CoaXPress Host connector indicator lamps
  • 'FPGA STATUS LAMP' on PCB:
    • Bi-color red/green LED
    • FPGA status lamp
  • 'BOARD STATUS LAMP' on PCB:
    • Bi-color red/green LED
  • 'A', 'B', 'C', 'D' on bracket:
    • 4x bi-color red/green LEDs
    • CoaXPress Host connector indicator lamps
  • 'FPGA STATUS LAMP' on PCB:
    • Bi-color red/green LED
    • FPGA status lamp
  • 'BOARD STATUS LAMP' on PCB:
    • Bi-color red/green LED
Switches
'RECOVERY' on card PCB:
  • 3-pin 1-row 0.1" header
  • Firmware emergency recovery
'RECOVERY' on card PCB:
  • 3-pin 1-row 0.1" header
  • Firmware emergency recovery
'RECOVERY' on card PCB:
  • 3-pin 1-row 0.1" header
  • Firmware emergency recovery
Dimensions
L 167.65 mm x H 111.15 mm L 6.6 in x H 4.38 in
L 167.65 mm x H 111.15 mm L 6.6 in x H 4.38 in
L 167.65 mm x H 111.15 mm L 6.6 in x H 4.38 in
Weight
TBD g, TBD oz
189 g, 6.67 oz
-
Host bus
Standard
PCI Express 3.0
PCI Express 3.0
PCI Express 3.0
Link width
  • 8 lanes
  • 1 lane, 2 lanes or 4 lanes with reduced performance
  • 8 lanes
  • 1 lane, 2 lanes or 4 lanes with reduced performance
  • 4 lanes
  • 1 lane or 2 lanes with reduced performance
Link speed
  • 8.0 GT/s (PCIe 3.0)
  • 5.0 GT/s (PCIe 2.0) with reduced performance
  • 8.0 GT/s (PCIe 3.0)
  • 5.0 GT/s (PCIe 2.0) with reduced performance
  • 8.0 GT/s (PCIe 3.0)
  • 5.0 GT/s (PCIe 2.0) with reduced performance
Maximum payload size
512 bytes
512 bytes
512 bytes
DMA
32- and 64-bit
32- and 64-bit
32- and 64-bit
Peak delivery bandwidth
7,800 MB/s
7,800 MB/s
3,900 MB/s
Effective (sustained) delivery bandwidth
6,700 MB/s (Host PC motherboard dependent)
6,700 MB/s (Host PC motherboard dependent)
3,350 MB/s (Host PC motherboard dependent)
Power consumption
Typ. TBD W (TBD W @ +3.3V,TBD W @ +12V), excluding camera and I/O power output
Typ. 22 W (TBD W @ +3.3V,TBD W @ +12V), excluding camera and I/O power output
Typ. 16.8 W (3.8 W @ +3.3V, 13 W @ +12V), excluding camera and I/O power output
Camera / video inputs
Interface standard(s)
CoaXPress 1.0, 1.1, 1.1.1 and 2.0
CoaXPress 1.0, 1.1 and 1.1.1
CoaXPress 1.0, 1.1 and 1.1.1
Connectors
4x HD-BNC CXP-12
8x DIN1.0/2.3 CXP-6
4x DIN1.0/2.3 CXP-6
Status LEDs
1 CoaXPress Host connection status per connector
1 CoaXPress Host connection status per connector
1 CoaXPress Host connection status per connector
Number of cameras
  • One 1- or 2- or 4-connection area-scan camera
  • Two 1- or 2-connection area-scan cameras (TBC)
  • Four 1-connection area-scan cameras (TBC)
  • One 1- or 2- or 4-connection line-scan camera (TBC)
  • Two 1- or 2-connection line-scan cameras (TBC)
  • Four 1-connection line-scan cameras (TBC)
  • Area-scan cameras:
    • One 1- or 2- or 4- or 8-connection camera
    • One or two 1- or 2- or 4-connection cameras
    • Up to four 1- or 2-connection cameras
    • One 1- or 2- or 4-connection camera and up to four 1-connection cameras
    • Up to eight 1-connection cameras
  • Line-scan cameras:
    • One 1- or 2- or 4- or 8-connection camera
    • One or two 1- or 2- or 4-connection cameras
  • Area-scan cameras:
    • One 1- or 2- or 4-connection camera
  • Line-scan cameras:
    • One 1- or 2- or 4-connection camera
Line-scan cameras supported
Yes
Yes
Yes
Maximum aggregated camera data transfer rate
50 Gbit/s (5,000 MB/s)
50 Gbit/s (5,000 MB/s)
25 Gbit/s (2,500 MB/s)
Supported CXP down-connection speeds
1.25 GT/s (CXP-1), 2.5 GT/s (CXP-2), 3.125 GT/s (CXP-3), 5 GT/s (CXP-5), 6.25 GT/s (CXP-6), 10.0 GT/s (CXP-10), and 12.5 GT/s (CXP-12)
1.25 GT/s (CXP-1), 2.5 GT/s (CXP-2), 3.125 GT/s (CXP-3), 5 GT/s (CXP-5), and 6.25 GT/s (CXP-6)
1.25 GT/s (CXP-1), 2.5 GT/s (CXP-2), 3.125 GT/s (CXP-3), 5 GT/s (CXP-5), and 6.25 GT/s (CXP-6)
Number of CXP data streams (per camera)
1 data stream per camera
1 data stream per camera
1 data stream per camera
Maximum CXP stream packet size
16,384 bytes
16,384 bytes
16,384 bytes
PoCXP (Power over CoaXPress)
  • PoCXP Safe Power:
    • 17 W of 24V DC regulated power per CoaXPress connector
    • PoCXP Device detection and automatic power-on
    • Overload and short-circuit protections
  • On-board 12V to 24V DC/DC converter
  • A +12V power source must be connected to the AUXILIARY POWER INPUT connector using a 6-pin PEG cable
  • PoCXP Safe Power:
    • 17 W of 24V DC regulated power per CoaXPress connector
    • PoCXP Device detection and automatic power-on
    • Overload and short-circuit protections
  • On-board 12V to 24V DC/DC converter
  • A +12V power source must be connected to the AUXILIARY POWER INPUT connector using a 6-pin PEG cable
  • PoCXP Safe Power:
    • 17 W of 24V DC regulated power per CoaXPress connector
    • PoCXP Device detection and automatic power-on
    • Overload and short-circuit protections
  • On-board 12V to 24V DC/DC converter
  • A +12V power source must be connected to the AUXILIARY POWER INPUT connector using a 6-pin PEG cable
Camera types
  • Area-scan cameras:
    • Gray-scale and color (RGB and Bayer CFA)
    • Single-tap (1X-1Y) progressive-scan
  • Line-scan cameras and contact imaging sensors:
    • Gray-scale and color RGB
  • Area-scan cameras:
    • Gray-scale and color (RGB and Bayer CFA)
    • Single-tap (1X-1Y) progressive-scan
  • Line-scan cameras and contact imaging sensors:
    • Gray-scale and color RGB
  • Area-scan cameras:
    • Gray-scale and color (RGB and Bayer CFA)
    • Single-tap (1X-1Y) progressive-scan
  • Line-scan cameras and contact imaging sensors:
    • Gray-scale and color RGB
Camera pixel formats supported
Raw, Monochrome, Bayer, RGB, and RGBA (PFNC names):
  • Raw
  • Mono8, Mono10, Mono12, Mono14, Mono16
  • BayerXX8, BayerXX10, BayerXX12, BayerXX14, BayerXX16 where XX = GR, RG, GB, or BG
  • RGB8, RGB10, RGB12, RGB14, RGB16
  • RGBA8, RGBA10, RGBA12, RGBA14, RGBA16
Raw, Monochrome, Bayer, RGB, and RGBA (PFNC names):
  • Raw
  • Mono8, Mono10, Mono12, Mono14, Mono16
  • BayerXX8, BayerXX10, BayerXX12, BayerXX14, BayerXX16 where XX = GR, RG, GB, or BG
  • RGB8, RGB10, RGB12, RGB14, RGB16
  • RGBA8, RGBA10, RGBA12, RGBA14, RGBA16
Raw, Monochrome, Bayer, RGB, and RGBA (PFNC names):
  • Raw
  • Mono8, Mono10, Mono12, Mono14, Mono16
  • BayerXX8, BayerXX10, BayerXX12, BayerXX14, BayerXX16 where XX = GR, RG, GB, or BG
  • RGB8, RGB10, RGB12, RGB14, RGB16
  • RGBA8, RGBA10, RGBA12, RGBA14, RGBA16
Area-scan camera control
Trigger
  • Precise control of asynchronous reset cameras, with exposure control.
  • Support of camera exposure/readout overlap.
  • Support of external hardware trigger, with optional delay and trigger decimation.
  • Precise control of asynchronous reset cameras, with exposure control.
  • Support of camera exposure/readout overlap.
  • Support of external hardware trigger, with optional delay and trigger decimation.
  • Precise control of asynchronous reset cameras, with exposure control.
  • Support of camera exposure/readout overlap.
  • Support of external hardware trigger, with optional delay and trigger decimation.
Strobe
  • Accurate control of the strobe position for strobed light sources.
  • Support of early and late strobe pulses.
  • Accurate control of the strobe position for strobed light sources.
  • Support of early and late strobe pulses.
  • Accurate control of the strobe position for strobed light sources.
  • Support of early and late strobe pulses.
Line-scan camera control
Scan/page trigger
  • Precise control of start-of-scan and end-of-scan triggers.
  • Support of external hardware trigger, with optional delay.
  • Support of infinite acquisition, without missing line, for web inspection applications.
  • Precise control of start-of-scan and end-of-scan triggers.
  • Support of external hardware trigger, with optional delay.
  • Support of infinite acquisition, without missing line, for web inspection applications.
  • Precise control of start-of-scan and end-of-scan triggers.
  • Support of external hardware trigger, with optional delay.
  • Support of infinite acquisition, without missing line, for web inspection applications.
Line trigger
  • Support for quadrature motion encoders, with programmable noise filters, selection of acquisition direction and backward motion compensation.
  • Rate Converter tool for fine control of the pixel aspect ratio: Rate Conversion Ratio in the range 0.001 to 1000 with an accuracy better than 0.1%.
  • Rate Divider tool
  • Support for quadrature motion encoders, with programmable noise filters, selection of acquisition direction and backward motion compensation.
  • Rate Converter tool for fine control of the pixel aspect ratio: Rate Conversion Ratio in the range 0.001 to 1000 with an accuracy better than 0.1%.
  • Rate Divider tool
  • Support for quadrature motion encoders, with programmable noise filters, selection of acquisition direction and backward motion compensation.
  • Rate Converter tool for fine control of the pixel aspect ratio: Rate Conversion Ratio in the range 0.001 to 1000 with an accuracy better than 0.1%.
  • Rate Divider tool
Line strobe
  • Accurate control of the strobe position for strobed light sources.
  • Accurate control of the strobe position for strobed light sources.
  • Accurate control of the strobe position for strobed light sources.
On-board processing
On-board memory
2 GB
2 GB
1 GB
Image data stream processing
  • Unpacking of 10-/12-/14-bit to 16-bit with selectable justification to LSb or MSb
  • Optional swap of R and B components
  • Little endian conversion
  • Unpacking of 10-/12-/14-bit to 16-bit with selectable justification to LSb or MSb
  • Optional swap of R and B components
  • Little endian conversion
  • Unpacking of 10-/12-/14-bit to 16-bit with selectable justification to LSb or MSb
  • Optional swap of R and B components
  • Little endian conversion
Data stream statistics
  • Measurement of:
    • Frame rate (Area-scan only)
    • Line rate
    • Data rate
  • Configurable averaging interval
  • Measurement of:
    • Frame rate (Area-scan only)
    • Line rate
    • Data rate
  • Configurable averaging interval
  • Measurement of:
    • Frame rate (Area-scan only)
    • Line rate
    • Data rate
  • Configurable averaging interval
Event signaling and counting
  • The application software can be notified of the occurrence of various events:
    • Standard event: the EVENT_NEW_BUFFER event notifies the application of newly filled buffers
    • A large set of custom events
  • Custom events sources:
    • I/O Toolbox events
    • Camera and Illumination control events
    • CoaXPress data stream events
    • CoaXPress host interface events
  • Each custom event is associated with a 32-bit counter that counts the number of occurrences
  • The last three 32-bit context data words of the event context data can be configured with event-specific context data:
    • Event-specific data
    • State of all System I/O lines sampled at the event occurrence time
    • Value of any event counter
  • The application software can be notified of the occurrence of various events:
    • Standard event: the EVENT_NEW_BUFFER event notifies the application of newly filled buffers
    • A large set of custom events
  • Custom events sources:
    • I/O Toolbox events
    • Camera and Illumination control events
    • CoaXPress data stream events
    • CoaXPress host interface events
  • Each custom event is associated with a 32-bit counter that counts the number of occurrences
  • The last three 32-bit context data words of the event context data can be configured with event-specific context data:
    • Event-specific data
    • State of all System I/O lines sampled at the event occurrence time
    • Value of any event counter
  • The application software can be notified of the occurrence of various events:
    • Standard event: the EVENT_NEW_BUFFER event notifies the application of newly filled buffers
    • A large set of custom events
  • Custom events sources:
    • I/O Toolbox events
    • Camera and Illumination control events
    • CoaXPress data stream events
    • CoaXPress host interface events
  • Each custom event is associated with a 32-bit counter that counts the number of occurrences
  • The last three 32-bit context data words of the event context data can be configured with event-specific context data:
    • Event-specific data
    • State of all System I/O lines sampled at the event occurrence time
    • Value of any event counter
Input LUT (Lookup Table)
  • Available for monochrome cameras
    • 8 to 8 bits
    • 10 to 8, 10 or 16 bits
    • 12 to 8, 12 or 16 bits
  • Available for monochrome cameras
    • 8 to 8 bits
    • 10 to 8, 10 or 16 bits
    • 12 to 8, 12 or 16 bits
  • Available for monochrome cameras
    • 8 to 8 bits
    • 10 to 8, 10 or 16 bits
    • 12 to 8, 12 or 16 bits
General Purpose Inputs and Outputs
Number of lines
20 I/O lines:
  • 4 differential inputs (DIN)
  • 4 singled-ended TTL inputs/outputs (TTLIO)
  • 8 isolated inputs (IIN)
  • 4 isolated outputs (IOUT)
10 I/O lines on INTERNAL I/O connector:
  • 2 differential inputs (DIN)
  • 2 singled-ended TTL inputs/outputs (TTLIO)
  • 4 isolated inputs (IIN)
  • 2 isolated outputs (IOUT)
NOTE: The number of I/O lines can be extended using I/O modules attached to the I/O EXTENSION connector.
10 I/O lines:
  • 2 differential inputs (DIN)
  • 2 singled-ended TTL inputs/outputs (TTLIO)
  • 4 isolated inputs (IIN)
  • 2 isolated outputs (IOUT)
Usage
  • Any I/O input lines can be used by any LIN tool of the I/O Toolbox
  • Selected pairs of I/O input lines can be used by any QDC tool of the I/O toolbox to decode A/B signals of a motion encoder
  • The LIN and QDC tools outputs can be further processed by the other tools (DIV, MDV, DEL) of the I/O toolbox to generate any of the following "trigger" events:
    • The "cycle trigger" of the Camera and Illumination controller
    • The "cycle sequence trigger" of the Camera and Illumination controller
    • The "start-of-scan trigger" of the Acquisition Controller (line-scan only)
    • The "end-of-scan trigger" of the Acquisition Controller (line-scan only)
  • Any I/O input lines can be used by any LIN tool of the I/O Toolbox
  • Selected pairs of I/O input lines can be used by any QDC tool of the I/O toolbox to decode A/B signals of a motion encoder
  • The LIN and QDC tools outputs can be further processed by the other tools (DIV, MDV, DEL) of the I/O toolbox to generate any of the following "trigger" events:
    • The "cycle trigger" of the Camera and Illumination controller
    • The "cycle sequence trigger" of the Camera and Illumination controller
    • The "start-of-scan trigger" of the Acquisition Controller (line-scan only)
    • The "end-of-scan trigger" of the Acquisition Controller (line-scan only)
-
Electrical specifications
  • DIN: High-speed differential inputs compatible with ANSI/EIA/TIA-422/485 differential line drivers and complementary TTL drivers
  • TTLIO: High-speed 5V-compliant TTL inputs or LVTTL outputs, compatible with totem-pole LVTTL, TTL, 5V CMOS drivers or LVTTL, TTL, 3V CMOS receivers
  • IIN: Isolated current-sense inputs with wide voltage input range up to 30V, compatible with totem-pole LVTTL, TTL, 5V CMOS drivers, RS-422 differential line drivers, potential free contacts, solid-state relays and opto-couplers
  • IOUT: Isolated contact outputs compatible with 30V / 100mA loads
  • DIN: High-speed differential inputs compatible with ANSI/EIA/TIA-422/485 differential line drivers and complementary TTL drivers
  • TTLIO: High-speed 5V-compliant TTL inputs or LVTTL outputs, compatible with totem-pole LVTTL, TTL, 5V CMOS drivers or LVTTL, TTL, 3V CMOS receivers
  • IIN: Isolated current-sense inputs with wide voltage input range up to 30V, compatible with totem-pole LVTTL, TTL, 5V CMOS drivers, RS-422 differential line drivers, potential free contacts, solid-state relays and opto-couplers
  • IOUT: Isolated contact outputs compatible with 30V / 100mA loads
  • DIN: High-speed differential inputs compatible with ANSI/EIA/TIA-422/485 differential line drivers and complementary TTL drivers
  • TTLIO: High-speed 5V-compliant TTL inputs or LVTTL outputs, compatible with totem-pole LVTTL, TTL, 5V CMOS drivers or LVTTL, TTL, 3V CMOS receivers
  • IIN: Isolated current-sense inputs with wide voltage input range up to 30V, compatible with totem-pole LVTTL, TTL, 5V CMOS drivers, RS-422 differential line drivers, potential free contacts, solid-state relays and opto-couplers
  • IOUT: Isolated contact outputs compatible with 30V / 100mA loads
Filter control
  • Glitch removal filter available on all System I/O input lines
  • Configurable filter time constants:
    • for DIN and TTLIO lines: 50 ns, 100 ns, 200 ns, 500 ns,1 µs
    • for IIN lines: 500 ns, 1 µs, 2 µs, 5 µs, 10 µs
  • Glitch removal filter available on all System I/O input lines
  • Configurable filter time constants:
    • for DIN and TTLIO lines: 50 ns, 100 ns, 200 ns, 500 ns,1 µs
    • for IIN lines: 500 ns, 1 µs, 2 µs, 5 µs, 10 µs
  • Glitch removal filter available on all System I/O input lines
  • Configurable filter time constants:
    • for DIN and TTLIO lines: 50 ns, 100 ns, 200 ns, 500 ns,1 µs
    • for IIN lines: 500 ns, 1 µs, 2 µs, 5 µs, 10 µs
Polarity control
Yes
Yes
Yes
Power output
Non-isolated, +12V, 1A, with electronic fuse protection
  • From AUXILIARY POWER connector to INTERNAL I/O and I/O EXTENSION connectors:
    • Non-isolated +12V, 1A, with electronic fuse protection
  • From PCI Express connector io I/O EXTENSION connector:
    • Non-isolated, +3.3V, unprotected
Non-isolated, +12V, 1A, with electronic fuse protection
I/O Toolbox tools
The I/O Toolbox is a configurable interconnection of tools that generates events (usually triggers) from input lines. The composition of the toolset is product- and firmware-dependent.
  • Line Input tool (LIN): Edge detector delivering events on rising or falling edges of any selected input line.
  • Quadrature Decoder tool (QDC): A composite tool including:
    • A quadrature edge detector delivering events on selected transitions of selected pairs of input lines.
    • An optional backward motion compensator for clean line-scan image acquisition when the motion is unstable.
    • A 32-bit up/down counter for delivering a position value.
  • Divider tool (DIV): to generate an event every nth input events from any I/O toolbox event source.
  • Multiplier/divider tool (MDV): to generate m events every d input events from any I/O toolbox event source.
  • Delay tool (DEL): to delay up to 16 events from one or two I/O toolbox event sources, by a programmable time or number of motion encoder ticks (any QDC events).
  • User Actions Scheduler tool (UAS): to delegate the execution of User Actions at a scheduled time or encoder position. Possible user actions include setting low/high/toggle any bit of the User Output Register or generation of any User Events.
The I/O Toolbox is a configurable interconnection of tools that generates events (usually triggers) from input lines. The composition of the toolset is product- and firmware-dependent.
  • Line Input tool (LIN): Edge detector delivering events on rising or falling edges of any selected input line.
  • Quadrature Decoder tool (QDC): A composite tool including:
    • A quadrature edge detector delivering events on selected transitions of selected pairs of input lines.
    • An optional backward motion compensator for clean line-scan image acquisition when the motion is unstable.
    • A 32-bit up/down counter for delivering a position value.
  • Divider tool (DIV): to generate an event every nth input events from any I/O toolbox event source.
  • Multiplier/divider tool (MDV): to generate m events every d input events from any I/O toolbox event source.
  • Delay tool (DEL): to delay up to 16 events from one or two I/O toolbox event sources, by a programmable time or number of motion encoder ticks (any QDC events).
  • User Actions Scheduler tool (UAS): to delegate the execution of User Actions at a scheduled time or encoder position. Possible user actions include setting low/high/toggle any bit of the User Output Register or generation of any User Events.
The I/O Toolbox is a configurable interconnection of tools that generates events (usually triggers) from input lines. The composition of the toolset is product- and firmware-dependent.
  • Line Input tool (LIN): Edge detector delivering events on rising or falling edges of any selected input line.
  • Quadrature Decoder tool (QDC): A composite tool including:
    • A quadrature edge detector delivering events on selected transitions of selected pairs of input lines.
    • An optional backward motion compensator for clean line-scan image acquisition when the motion is unstable.
    • A 32-bit up/down counter for delivering a position value.
  • Divider tool (DIV): to generate an event every nth input events from any I/O toolbox event source.
  • Multiplier/divider tool (MDV): to generate m events every d input events from any I/O toolbox event source.
  • Delay tool (DEL): to delay up to 16 events from one or two I/O toolbox event sources, by a programmable time or number of motion encoder ticks (any QDC events).
  • User Actions Scheduler tool (UAS): to delegate the execution of User Actions at a scheduled time or encoder position. Possible user actions include setting low/high/toggle any bit of the User Output Register or generation of any User Events.
I/O Toolbox composition
Firmware-dependent I/O toolbox composition:
  • 1-camera: 8 LIN, 1 QDC, 1 DIV, 1 MDV, 2 DEL, 1 UAS
8 LIN, 1 QDC, 1 DIV, 1 MDV, 2 DEL, 1 UAS
Firmware-dependent I/O toolbox composition:
  • 1-camera: 8 LIN, 1 QDC, 1 DIV, 1 MDV, 2 DEL, 1 UAS
  • 1-df-camera: 8 LIN, 1 QDC, 1 DIV, 1 MDV, 2 DEL, 1 UAS
  • 1-line-scan: 8 LIN, 1 QDC, 1 DIV, 1 MDV, 2 DEL, 1 UAS
  • 1-df-line-scan: 8 LIN, 1 QDC, 1 DIV, 1 MDV, 2 DEL, 1 UAS, 2 EIN
C2C-Link
Description
  • Allows to accurately synchronize the trigger and start-of-exposure of multiple grabber-controlled area-scan and line-scan cameras.
  • C2C-Link is able to synchronize cameras connected
    • to the same Coaxlink card
    • to different cards in the same PC (requires an accessory cable such as the "3303 C2C-Link Ribbon Cable" or a custom-made C2C-Link cable)
    • to different cards in different PCs (requires one "1636 InterPC C2C-Link Adapter" for each PC and one RJ 45 CAT 5 STP straight LAN cable for each adapter but the last one)
  • Allows to accurately synchronize the trigger and start-of-exposure of multiple grabber-controlled area-scan and line-scan cameras.
  • C2C-Link is able to synchronize cameras connected
    • to the same Coaxlink card
    • to different cards in the same PC (requires an accessory cable such as the "3303 C2C-Link Ribbon Cable" or a custom-made C2C-Link cable)
    • to different cards in different PCs (requires one "1636 InterPC C2C-Link Adapter" for each PC and one RJ 45 CAT 5 STP straight LAN cable for each adapter but the last one)
  • Allows to accurately synchronize the trigger and start-of-exposure of multiple grabber-controlled area-scan and line-scan cameras.
  • C2C-Link is able to synchronize cameras connected
    • to the same Coaxlink card
    • to different cards in the same PC (requires an accessory cable such as the "3303 C2C-Link Ribbon Cable" or a custom-made C2C-Link cable)
    • to different cards in different PCs (requires one "1636 InterPC C2C-Link Adapter" for each PC and one RJ 45 CAT 5 STP straight LAN cable for each adapter but the last one)
Specification
  • Maximum distance
    • 60 cm inside a PC
    • 1200 m cumulated adapter to adapter cable length
  • Maximum trigger rate
    • 2.5 MHz for configurations using a single PC, or up to 10 PCs and 100 m total C2C-Link cable length
    • 200 kHz for configurations up to 32 PCs and 1200m total C2C-Link cable length
  • Trigger propagation delay from master to slave devices
    • Less than 10 ns for cameras on the same Coaxlink card or on different Coaxlink cards in the same PC
    • Less than 265 ns for cameras on different Coaxlink cards in different PCs (3 PCs and 40m total C2C-Link cable length)
  • Maximum distance
    • 60 cm inside a PC
    • 1200 m cumulated adapter to adapter cable length
  • Maximum trigger rate
    • 2.5 MHz for configurations using a single PC, or up to 10 PCs and 100 m total C2C-Link cable length
    • 200 kHz for configurations up to 32 PCs and 1200m total C2C-Link cable length
  • Trigger propagation delay from master to slave devices
    • Less than 10 ns for cameras on the same Coaxlink card or on different Coaxlink cards in the same PC
    • Less than 265 ns for cameras on different Coaxlink cards in different PCs (3 PCs and 40m total C2C-Link cable length)
  • Maximum distance
    • 60 cm inside a PC
    • 1200 m cumulated adapter to adapter cable length
  • Maximum trigger rate
    • 2.5 MHz for configurations using a single PC, or up to 10 PCs and 100 m total C2C-Link cable length
    • 200 kHz for configurations up to 32 PCs and 1200m total C2C-Link cable length
  • Trigger propagation delay from master to slave devices
    • Less than 10 ns for cameras on the same Coaxlink card or on different Coaxlink cards in the same PC
    • Less than 265 ns for cameras on different Coaxlink cards in different PCs (3 PCs and 40m total C2C-Link cable length)
Software
Host PC Operating System
  • Microsoft Windows 10, 8.1, 7 for x86 (32-bit) and x86-64 (64-bit) processor architectures
  • Linux for x86 (32-bit), x86-64 (64-bit) and aarch64 (64-bit) processor architectures
  • macOS for x86-64 (64-bit) processor architecture
Refer to release notes for details
  • Microsoft Windows 10, 8.1, 7 for x86 (32-bit) and x86-64 (64-bit) processor architectures
  • Linux for x86 (32-bit), x86-64 (64-bit) and aarch64 (64-bit) processor architectures
  • macOS for x86-64 (64-bit) processor architecture
Refer to release notes for details
  • Microsoft Windows 10, 8.1, 7 for x86 (32-bit) and x86-64 (64-bit) processor architectures
  • Linux for x86 (32-bit), x86-64 (64-bit) and aarch64 (64-bit) processor architectures
  • macOS for x86-64 (64-bit) processor architecture
Refer to release notes for details
APIs
EGrabber class, with C++ and .NET APIs:
  • .NET assembly designed to be used with development environments compatible with .NET frameworks version 2.0 or higher
GenICam GenTL producer libraries compatible with C/C++ compilers:
  • x86 dynamic library designed to be used with ISO-compliant C/C++ compilers for the development of x86 applications
  • x86_64 dynamic library designed to be used with ISO-compliant C/C++ compilers for the development of x86_64 applications
  • aarch64 dynamic library designed to be used with ISO-compliant C/C++ compilers for the development of aarch64 applications
EGrabber class, with C++ and .NET APIs:
  • .NET assembly designed to be used with development environments compatible with .NET frameworks version 2.0 or higher
GenICam GenTL producer libraries compatible with C/C++ compilers:
  • x86 dynamic library designed to be used with ISO-compliant C/C++ compilers for the development of x86 applications
  • x86_64 dynamic library designed to be used with ISO-compliant C/C++ compilers for the development of x86_64 applications
  • aarch64 dynamic library designed to be used with ISO-compliant C/C++ compilers for the development of aarch64 applications
EGrabber class, with C++ and .NET APIs:
  • .NET assembly designed to be used with development environments compatible with .NET frameworks version 2.0 or higher
GenICam GenTL producer libraries compatible with C/C++ compilers:
  • x86 dynamic library designed to be used with ISO-compliant C/C++ compilers for the development of x86 applications
  • x86_64 dynamic library designed to be used with ISO-compliant C/C++ compilers for the development of x86_64 applications
  • aarch64 dynamic library designed to be used with ISO-compliant C/C++ compilers for the development of aarch64 applications
Memento
Compatible with Memento Event Logging tool
Compatible with Memento Event Logging tool
Compatible with Memento Event Logging tool
Environmental conditions
Operating ambient air temperature
0 to +55 °C / +32 to +131 °F
0 to +55 °C / +32 to +131 °F
0 to +55 °C / +32 to +131 °F
Operating ambient air humidity
10 to 90% RH non-condensing
10 to 90% RH non-condensing
10 to 90% RH non-condensing
Storage ambient air temperature
-20 to +70 °C / -4 to +158 °F
-20 to +70 °C / -4 to +158 °F
-20 to +70 °C / -4 to +158 °F
Storage ambient air humidity
10 to 90% RH non-condensing
10 to 90% RH non-condensing
10 to 90% RH non-condensing
Certifications
Electromagnetic - EMC standards
  • European Council EMC Directive 2004/108/EC
  • United States FCC rule 47 CFR 15
  • European Council EMC Directive 2004/108/EC
  • United States FCC rule 47 CFR 15
  • European Council EMC Directive 2004/108/EC
  • United States FCC rule 47 CFR 15
EMC - Emission
  • EN 55022:2010 Class B
  • FCC 47 Part 15 Class B
  • EN 55022:2010 Class B
  • FCC 47 Part 15 Class B
  • EN 55022:2010 Class B
  • FCC 47 Part 15 Class B
EMC - Immunity
  • EN 55024:2010 Class B
  • EN 61000-4-3
  • EN 61000-4-4
  • EN 61000-4-6
  • EN 55024:2010 Class B
  • EN 61000-4-3
  • EN 61000-4-4
  • EN 61000-4-6
-
Flammability
PCB compliant with UL 94 V-0
PCB compliant with UL 94 V-0
PCB compliant with UL 94 V-0
RoHS
European Union Directive 2011/65/EU (ROHS2)
European Union Directive 2011/65/EU (ROHS2)
European Union Directive 2011/65/EU (ROHS2)
REACH
European Union Regulation 1907/2006
European Union Regulation 1907/2006
European Union Regulation 1907/2006
WEEE
Must be disposed of separately from normal household waste and must be recycled according to local regulations
Must be disposed of separately from normal household waste and must be recycled according to local regulations
Must be disposed of separately from normal household waste and must be recycled according to local regulations
Ordering Information
Included accessories
-
  • 3304 - HD26F I/O Adapter Cable
-
HS Acquisition

用于AOI、3D SPI、3D铅/球检测机的高速图像采集。

Coaxlink 和 Grablink 卡是可靠的工业图像采集卡,从最快的数码相机提供强大和稳定的图像采集。它们的特点是精确的相机控制和同步功能。
  • AOI(自动光学检测)机
  • 3D SPI(锡膏检测)机
  • 3D 引线/球型检查机
LS Acquisition Elec

极高分辨率线扫描图像采集,用于平板显示器检测和太阳能电池检测

Coaxlink 和 Grablink 卡是可靠的工业图像采集卡,从最快的数码相机提供强大和稳定的图像采集。它们的特点是精确的线扫描相机控制和同步功能。
3D Acquisition Elec

用于电子检测机的3D图像采集

关联产品
Coaxlink Quad 3D-LLE
LS Acquisition Man

表面检测机的线扫描图像采集

Coaxlink 和 Grablink 卡是可靠的工业图像采集卡,从最快的数码相机提供强大和稳定的图像采集。它们的特点是精确的线扫描相机控制和同步功能。
LS Acquisition Textile

用于纺织品检测的线扫描图像采集

Coaxlink 和 Grablink 卡是可靠的工业图像采集卡,从最快的数码相机提供强大和稳定的图像采集。它们的特点是精确的线扫描相机控制和同步功能。
3D Acquisition Man

用于检测机的3D图像采集

关联产品
Coaxlink Quad 3D-LLE
HS AcquisitionPrinting

用于印刷检查机的高速线扫描图像采集

  • 包装打印检查
  • 标签打印检查
Hyperspectral

科学研究,高光谱成像

CoaXPress 高光谱成像器可安装在飞机或无人机上,进行环境和农业监测、土地分析或机载遥感。
Defense Transmission Coax

通过长距离同轴线缆传输和采集高清视频

CoaXPress 是最近出现的强大标准,提供了相机和 PC 图像采集卡之间的高速接口。在高速公路上,高速相机可以高速连拍图像。更清晰的图像将提高车牌识别的准确率。 可容纳高频实时触发和曝光时间调整到低照度的情况。
Airborne ISR

机载 ISR

视觉系统集成高分辨率和高速 CoaXPress 相机,用于机载情报、监视和侦察任务。
Camera Turrets

用于机载监视或炮塔的相机转塔

利用滑环,CoaXPress 可轻松集成到 360°C 旋转工位以允许连续平移。高分辨率视频提供更清晰的图像和更大的可视面积,从而可能减少所需相机的数量。
Unmanned Apps

无人应用,车载视频采集,无人机遥控

CoaXPress 标准可在几毫秒内将视频传输到 PC。该系统的超低延迟将允许控制陆地车辆或远程控制无人机。
ITS Transmission Coax

通过长距离同轴线缆传输和采集高清视频,进行交通监控、监视和控制

Transport Security

用于铁路和公路运输、警用车辆的嵌入式安全系统

Coaxlink Duo PCIe/104 板具有极佳的耐高温、抗震颤和耐湿气性能,特别适用于铁路和公路运输、警用车辆设备或者任何移动或户外视频监视中使用的嵌入式安全系统。