Learn more about our product features:
Logo-Memento.png Logo-Genicam.png
 

Coaxlink Quad CXP-12 JPEG

CXP-12 CoaXPress-Framegrabber mit 4 Anschlüssen und JPEG-Kompression

Im Überblick
  • Vier 250 MPixel/s JPEG-Encoder
  • Kompatibel mit Bayer-CFA-Kameras (8 Bit/Pixel)
  • Zwei Streams pro Kamera: JPEG-Stream und RGB-Vorschaustream
  • 4 CoaXPress CXP-12-Anschlüsse: 5.000 MB/s Kamerabandbreite
  • PCIe 3.0 (Gen 3) x8 Bus: 6.700 MB/s Busbandbreite



Vergleichen Händler


Anwendungen

Der Coaxlink Quad CXP-12 JPEG ermöglicht die kompakte Implementierung einer Mehrkanalbilderfassung mit sehr hoher Auflösung sowie von Aufzeichnungssystemen. Die eingebettete Pixelverarbeitung reduziert die CPU-Arbeitslast zur Überwachung und Kompression der Bildstreams wesentlich.


PCIe 3.0 (Gen 3) x8 Bus
PCIe 3.0 (Gen 3) x8 Bus

  • 7.800 MB/s Spitzenlast-Busbandbreite
  • 6.700 MB/s kontinuierliche Busbandbreite


Verwendung von Standard-Koaxialkabeln
Verwendung von Standard-Koaxialkabeln

  • Ein einziges, preiswertes Kabel für Datenübertragung, Kamerasteuerung, Auslöser und Stromversorgung
  • Hohe Zuverlässigkeit und Flexibilität, einsatzbereit in den härtesten Umgebungen


Memento Event-Logging-Tool

  • Memento ist ein fortschrittliches Entwicklungs- und Debugging-Tool, das für Coaxlink- und Grablink-Karten verfügbar ist.
  • Memento zeichnet genaue Protokolle aller mit der Kamera, dem Framegrabber und seinen zugehörigen Treibern sowie der Anwendung im Zusammenhang stehenden Ereignisse auf.
  • Es liefert Entwicklern eine präzise Zeitachse der zeitgestempelten Ereignisse mit Kontextinformationen einer Logikanalysatoransicht.
  • Es bietet wertvolle Hilfe bei der Anwendungsentwicklung und beim Debuggen sowie während des Maschinenbetriebs.


High-Performance DMA (Direct Memory Access)
High-Performance DMA (Direct Memory Access)

  • Direkte Übertragung an vom Benutzer zugewiesene Arbeitsspeicher- und Hardwarekarten, die PCI-Adressen bereitstellen
  • Hardware Scatter-Gather-Unterstützung
  • 64-Bit-Adressierungsfähigkeit


Trigger-Fähigkeiten für Flächenscans

  • Wenn sich das Teil in seiner Position befindet, wird die Erfassung mithilfe eines Triggers ausgelöst. Hardware-Trigger kommen von den Coaxlink I/O-Leitungen. Software-Trigger kommen von der Anwendung.
  • Eine optionale Triggerverzögerung ist verfügbar, um die Erfassung entsprechend einer programmierbaren Zeit zu verschieben.
  • Eine Funktion zur Dezimierung von Triggern ermöglicht das Überspringen einiger Trigger.
  • Mit der Belichtungssteuerung der Kamera kann die Anwendung die Belichtungszeit der Kamera steuern.
  • Nach Beginn der Erfassung generiert die Coaxlink-Karte zum entsprechenden Zeitpunkt ein Signal, das ein an die Ausgangsleitung angeschlossenes Beleuchtungsgerät steuert.


BESCHREIBUNG
BESCHREIBUNG

  • Die 4-Kamera-Firmwarevariante des Coaxlink Quad CXP-12 JPEG implementiert vier unabhängige Bilderfassungskanäle mit jeweils einem Bayer-CFA-Decoder und einem Baseline-JPEG-Encoder. Diese können bis zu 250 Megapixel/s, also insgesamt 1 Milliarde Farbpixel pro Sekunde, verarbeiten.
  • Jeder Kanal liefert zwei gleichzeitige Streams: ein „JPEG“-kodierter Stream für Aufnahmen und ein „Vorschau“-Stream zur Überwachung.
  • Der JPEG-Stream liefert mit einer typischen Latenz von nur 20 Zeilen ein JFIF-konformes codiertes Bild mit voller 4:2:2-Auflösung, das mit Standard-JPEG-Decodern kompatibel ist. Die Qualität der JPEG-Codierung kann von 1 bis 100 konfiguriert werden.
  • Der Vorschaustream bietet volle 8-Bit-Bayer-Auflösung, volle 24-Bit-RGB-Auflösung oder 24-Bit-RGB-Bilder mit niedriger Auflösung.


Bilderfassung von den schnellsten und höchstauflösenden Kameras
Bilderfassung von den schnellsten und höchstauflösenden Kameras

  • Höchste Datenerfassungsrate der Branche
  • 50 Gbit/s (5.000 MB/s) Bandbreite von Kamera zu Host-PC-Speicher


Micro-BNC-Steckverbinder (HD-BNC™) für zuverlässigen Anschluss
Micro-BNC-Steckverbinder (HD-BNC™) für zuverlässigen Anschluss

  • Bewährte Verriegelung durch Drücken und Drehen in der Art eines Bajonettverschlusses
  • Ermöglicht schnelles Herstellen und Trennen von Verbindungen


Direkte GPU-Übertragung
Direkte GPU-Übertragung

  • Beispielprogramme für AMD DirectGMA und NVIDIA (CUDA) verfügbar.
  • Durch die direkte GPU-Übertragung werden keine unnötigen Systemspeicherkopien erstellt, wodurch die Auslastung der CPU ebenso wie die Latenz geringer ausfällt, was die Leistung bei den Datenübertragungszeiten für Anwendungen wesentlich verbessert.
  • Mit DirectGMA von AMD ist die direkte Erfassung der Bilddaten im GPU-Speicher möglich Kompatibel mit AMD FirePro W5x00 und höher sowie allen Produkten der AMD FirePro S-Serie.


Kompatibel mit <a target="_blank" href="https://www.euresys.com/en/Products/Machine-Vision-Software/eGrabber"target="_blank">eGrabber</A>
Kompatibel mit eGrabber


Kompatibel mit Genicam
Kompatibel mit Genicam

Umfasst Support für

  • GenApi
  • Die Standard Feature Naming Convention (SFNC)
  • GenTL


Unterstützung des JFIF-Bildformats

Der GenICam-Browser und die GenTL Viever-Anwendungen unterstützen jetzt JFIF-Bilder.


Unterstützung langer Kabel
Unterstützung langer Kabel

  • 40 Meter bei CXP-12-Geschwindigkeit (12,5 Gbit/s)
  • 72 Meter bei CXP-6-Geschwindigkeit (6,25 Gbit/s)
  • 100 Meter bei CXP-3-Geschwindigkeit (3 Gbit/s)


Anschluss von bis zu 4 Kameras an eine einzige Coaxlink-Karte
Anschluss von bis zu 4 Kameras an eine einzige Coaxlink-Karte


Universelle I/O-Leitungen
Universelle I/O-Leitungen

  • Kompatibel mit einer breiten Palette an Sensoren und Bewegungsencodern.
  • Highspeed-Differenzeingänge: Quadratur-Bewegungsencoder unterstützt bis zu 5 MHz.
  • Galvanisch getrennte Strommesseingänge: 5 V, 12 V, 24 V Signalspannungen akzeptiert, bis zu 50 kHz, einzeln galvanisch getrennt bis 250 VDC und 170 VAC RMS.
  • Galvanisch getrennte Kontaktausgänge.
  • 5V-konforme Highspeed-TTL-Eingänge/ LVTTL-Ausgänge.


Windows-, Linux- und Mac OS-Treiber verfügbar
Windows-, Linux- und Mac OS-Treiber verfügbar

  • Einschließlich Unterstützung für Intel 64-Bit-Plattformen sowie ARM 64-Bit-Plattformen


Mechanical
Format Standard profile, half length, 8-lane PCI Express card
Cooling method Air cooling, fan-cooled heatsink
Mounting For insertion in a standard height, 8-lane or higher, PCI Express card slot
Connectors
  • 'A', 'B', 'C', 'D' on bracket:
    • 4x Micro-BNC female connectors
    • CoaXPress host interface
  • 'EXTERNAL I/O' on bracket:
    • 26-pin 3-row high-density female sub-D connector
    • I/O lines and power output
  • 'INTERNAL I/O 1' and 'INTERNAL I/O 2' on PCB:
    • 2x 26-pin 2-row 0.1" pitch pin header with shrouding
    • I/O lines and power output
  • 'I/O EXTENSION' on PCB:
    • 26-pin 2-row 0.05" pitch pin header with shrouding
    • I/O extension lines and power output
  • 'AUXILIARY POWER INPUT' on module:
    • 6-pin PEG power socket
    • 12 VDC power input for PoCXP camera(s) and I/O power
  • 'C2C-LINK' on module:
    • 6-pin 2-row 0.1" pitch pin header
    • Card to card link
LED indicators
  • 'A', 'B', 'C', 'D' on bracket:
    • Bi-color red/green LEDs
    • CoaXPress Host connector indicator
  • 'FPGA STATUS LAMP' on PCB:
    • Bi-color red/green LED
    • FPGA status indicator
  • 'BOARD STATUS LAMP' on PCB:
    • Bi-color red/green LED
    • Board status indicator
Switches 'RECOVERY' on PCB:
  • 3-pin 1-row 0.1" header or 2-way DIP switch
  • Firmware emergency recovery
Dimensions PCB L X H: 167.65 mm x 111.15 mm, 6.6 in x 4.38 in
Weight 196 g, 6.91 oz
Host bus
Standard PCI Express 3.0
Link width
  • 8 lanes
  • 1 lane, 2 lanes or 4 lanes with reduced performance
Link speed
  • 8.0 GT/s (PCIe 3.0)
  • 5.0 GT/s (PCIe 2.0) with reduced performance
Maximum payload size 512 bytes
DMA 32- and 64-bit
Peak delivery bandwidth 7,800 MB/s
Effective (sustained) delivery bandwidth 6,700 MB/s (Host PC motherboard dependent)
Power consumption Typ. 18.1 W (6.3 W @ +3.3V, 11.8 W @ +12V), excluding camera and I/O power output
Camera / video inputs
Interface standard(s) CoaXPress 1.0, 1.1, 1.1.1 and 2.0
Connectors Four micro-BNC 75 Ohms (also known as HD-BNC™) CXP-12
Status LEDs One CoaXPress Host connection status LED per connection
Number of cameras Four 1-connection area-scan cameras
Maximum aggregated camera data transfer rate 50 Gbit/s (5,000 MB/s)
Supported CXP down-connection speeds 1.25 GT/s (CXP-1), 2.5 GT/s (CXP-2), 3.125 GT/s (CXP-3), 5 GT/s (CXP-5), 6.25 GT/s (CXP-6), 10.0 GT/s (CXP-10), and 12.5 GT/s (CXP-12)
Supported CXP up-connection speeds
  • Low-speed 20.83... Mbps (CXP-1 to CXP-6)
  • Low-speed 41.66... Mbps (CXP-10, CXP-12)
Number of CXP data streams (per camera) 1 data stream per camera
Maximum CXP stream packet size 16,384 bytes
PoCXP (Power over CoaXPress)
  • PoCXP Safe Power:
    • 17 W of 24V DC regulated power per CoaXPress connector
    • PoCXP Device detection and automatic power-on
    • Overload and short-circuit protections
  • On-board 12V to 24V DC/DC converter
  • A +12V power source must be connected to the AUXILIARY POWER INPUT connector using a 6-pin PEG cable
Camera types Area-scan cameras:
  • 8-bit Bayer CFA single-tap (1X-1Y) progressive-scan
  • Image resolution (H x V): from 128 x 16 up to 5120 x 3840; width and height must be multiples of 8
Camera pixel formats supported BayerGR8, BayerRG8, BayerGB8, BayerBG8
Area-scan camera control
Trigger
  • Precise control of asynchronous reset cameras, with exposure control.
  • Support of camera exposure/readout overlap.
  • Support of external hardware trigger, with optional delay and trigger decimation.
Strobe
  • Accurate control of the strobe position for strobed light sources.
  • Support of early and late strobe pulses.
On-board processing
On-board memory 2 GB
Image data stream processing
  • Optional swap of R and B components
  • 1:8 image downscaling available on RGB8 output (Stream0, a.k.a. "preview stream")
Bayer CFA to RGB decoder 3x3 median-based interpolation method on '4-camera' firmware variant
Data stream statistics
  • Measurement of:
    • Frame rate (Area-scan only)
    • Line rate
    • Data rate
  • Configurable averaging interval
Event signaling and counting
  • The application software can be notified of the occurrence of various events:
    • Standard event: the EVENT_NEW_BUFFER event notifies the application of newly filled buffers
    • A large set of custom events
  • Custom events sources:
    • I/O Toolbox events
    • Camera and Illumination control events
    • CoaXPress data stream events
    • CoaXPress host interface events
  • Each custom event is associated with a 32-bit counter that counts the number of occurrences
  • The last three 32-bit context data words of the event context data can be configured with event-specific context data:
    • Event-specific data
    • State of all System I/O lines sampled at the event occurrence time
    • Value of any event counter
On-board video codec
Video encoders JPEG
  • Baseline profile
  • 4 encoders
  • Up to 250 Mpixels/second per encoder
  • JFIF compliant output
General Purpose Inputs and Outputs
Number of lines 20 I/O lines:
  • 4 differential inputs (DIN)
  • 4 singled-ended TTL inputs/outputs (TTLIO)
  • 8 isolated inputs (IIN)
  • 4 isolated outputs (IOUT)
NOTE: The number of I/O lines can be extended using I/O modules attached to the I/O EXTENSION connector.
Usage
  • Any I/O input lines can be used by any LIN tool of the I/O Toolbox
  • Selected pairs of I/O input lines can be used by any QDC tool of the I/O toolbox to decode A/B signals of a motion encoder
Electrical specifications
  • DIN: High-speed differential inputs, up to 5 MHz, compatible with ANSI/EIA/TIA-422/485 differential line drivers and complementary TTL drivers
  • TTLIO: High-speed 5V-compliant TTL inputs or LVTTL outputs, compatible with totem-pole LVTTL, TTL, 5V CMOS drivers or LVTTL, TTL, 3V CMOS receivers
  • IIN: Isolated current-sense inputs with wide voltage input range up to 30V, compatible with totem-pole LVTTL, TTL, 5V CMOS drivers, RS-422 differential line drivers, potential free contacts, solid-state relays and opto-couplers
  • IOUT: Isolated contact outputs compatible with 30V / 100mA loads
NOTE: IIN and IOUT lines provide a functional isolation grade for the circuit technical protection. It does not provide an isolation that can protect a human being from electrical shock!
Filter control
  • Glitch removal filter available on all System I/O input lines
  • Configurable filter time constants:
    • for DIN and TTLIO lines: 50 ns, 100 ns, 200 ns, 500 ns, 1 µs
    • for IIN lines: 500 ns, 1 µs, 2 µs, 5 µs, 10 µs
Polarity control Yes
Power output Non-isolated, +12V, 1A, with electronic fuse protection
I/O Toolbox tools The I/O Toolbox is a configurable interconnection of tools that generates events (usually triggers):
  • Line Input tool (LIN): edge detector delivering events on rising or falling edges of any selected input line.
  • Quadrature Decoder tool (QDC): a composite tool including:
    • A quadrature edge detector delivering events on selected transitions of selected pairs of input lines.
    • An optional backward motion compensator for clean line-scan image acquisition when the motion is unstable.
    • A 32-bit up/down counter for delivering a position value.
  • Device Link Trigger tool (DLT): delivers an event on reception of a valid high-speed CoaXPress 2.0 connection trigger packet message from the remote device.
  • User Actions Scheduler tool (UAS): to delegate the execution of 'User Actions' at a scheduled time or encoder position. Possible user actions include setting low/high/toggle any bit of the User Output Register or generation of any User Events.
  • Delay tool (DEL): to delay up to 16 events from one or two I/O toolbox event sources, by a programmable time or number of motion encoder ticks (any QDC events).
  • Divider tool (DIV): to generate an event every nth input events from any I/O toolbox event source.
  • Multiplier/divider tool (MDV): to generate m events every d input events from any I/O toolbox event source.
  • The 'Input Tools' (LIN, QDC, DLT and UAS) can be further processed by the 'Event Tools' (DEL, DIV and MDV) to generate any of the following "trigger" events:
    • The "cycle trigger" of the Camera and Illumination controller
    • The "cycle sequence trigger" of the Camera and Illumination controller
    • The "start-of-scan trigger" of the Acquisition Controller (line-scan only)
    • The "end-of-scan trigger" of the Acquisition Controller (line-scan only)
I/O Toolbox composition 8 LIN, 4 QDC, 8 DLT, 1 UAS, 4 DEL, 4 DIV, 4 MDV, 2 C2C
C2C-Link
Description
  • Accurate synchronization of the trigger and the start-of-exposure of multiple grabber-controlled area-scan cameras.
  • Accurate synchronization of the start-of-cycle, start-of-scan and end-of-scan of multiple grabber-controlled line-scan cameras.
Specification
  • C2C-Link synchronizes cameras connected to:
    • the same card
    • to different cards in the same PC (requires an accessory cable such as the "3303 C2C-Link Ribbon Cable" or a custom-made C2C-Link cable)
    • to different cards in different PCs (requires one "1636 InterPC C2C-Link Adapter" for each PC and one RJ 45 CAT 5 STP straight LAN cable for each adapter but the last one)
  • Maximum distance:
    • 60 cm inside a PC
    • 1200 m cumulated adapter to adapter cable length
  • Maximum trigger rate:
    • 2.5 MHz for configurations using a single PC, or up to 10 PCs and 100 m total C2C-Link cable length
    • 200 kHz for configurations up to 32 PCs and 1200m total C2C-Link cable length
  • Trigger propagation delay from master to slave devices:
    • Less than 10 ns for cameras on the same card or on different cards in the same PC
    • Less than 265 ns for cameras on different cards in different PCs (3 PCs and 40m total C2C-Link cable length)
Software
Host PC Operating System
  • Microsoft Windows 11, 10, 8.1, 7 for x86-64 (64-bit) processor architecture
  • Linux for x86-64 (64-bit) and AArch64 (64-bit) processor architectures
  • macOS for x86-64 (64-bit) and AArch64 (64-bit) processor architectures
APIs
  • EGrabber class, with C++ and .NET APIs: .NET assembly designed to be used with development environments compatible with .NET frameworks version 4.0 or higher
  • GenICam GenTL producer libraries compatible with C/C++ compilers:
    • 'x86_64' dynamic library designed to be used with ISO-compliant C/C++ compilers for the development of x86-64 (64-bit) applications
    • 'aarch64' dynamic library designed to be used with ISO-compliant C/C++ compilers for the development of AArch64 (64-bit) applications
Environmental conditions
Operating ambient air temperature 0 °C to +55 °C / +32 °F to +131 °F
Operating ambient air humidity 10% to 90% RH non-condensing
Storage ambient air temperature -20 °C to +70 °C/ -4 °F to +158 °F
Storage ambient air humidity 10% to 90% RH non-condensing
Certifications
Electromagnetic - EMC standards
  • European Council EMC Directive 2014/30/EU
  • United States FCC rule 47 CFR 15
EMC - Emission
  • EN 55032:2015 / CISPR 32:2012 Class B
  • FCC 47 Part 15 Class B
EMC - Immunity
  • EN 55024:2010 / CISPR 24:2010
  • EN 55035:2017 / CISPR 35:2016
  • EN 61000-4-2:2009
  • EN 61000-4-3:2006
  • EN 61000-4-4:2004
  • EN 61000-4-6:2014
KC Certification Korean Radio Waves Act, Article 58-2, Clause 3
Flammability PCB compliant with UL 94 V-0
RoHS European Union Directive 2015/863 (ROHS3)
REACH European Union Regulation 1907/2006
WEEE Must be disposed of separately from normal household waste and must be recycled according to local regulations
Ordering Information
Product code - Description
Optional accessories