AIMEX / Vision Korea 2018

Event / 04.2018


IMG_20180328_094329-(1).jpgAs the doors have closed on the Korea Vision Show 2018, let's review our demonstrations and new product presentations.
 
A lot of people showed interest for our new products.
In this first show report video, Marc Damhaut talks about the latest member of the Coaxlink series, the Coaxlink Octo, a PCIe 3.0 eight-connection CoaXPress frame grabber. The Coaxlink Octo is able to connect a wide variety of cameras. Check the video here: https://www.youtube.com/watch?v=CqHCZO1IrJo
 
Next demonstration, Marc talks about our new Coaxlink Quad 3D-LLE, a CXP-6 frame grabber with on-board laser line extraction for 3D profiling. Here it is demonstrated in a 3D PCB scanning application. The Coaxlink Quad 3D-LLE uses its FPGA to measure the position of the laser line in real-time and transfers the 3D depth map to the host PC. Have a look at the demo: https://www.youtube.com/watch?v=rC08wcV2LfA
 
Last but not least, Marc introduces our new range of Camport Video Converters. They are used to convert the video signal from older cameras such as Camera Link and NTSC/PAL cameras to newer interfaces like GigE (Ethernet), USB3 or CoaXPress ports. Check the video here: https://www.youtube.com/watch?v=GCzu_l_Aroc

 

We also take this opportunity to thank our distributors in Korea, Fainstec and IOVIS,  who also presented our new products at their booth.


distributors.png





team-(1).png