Do not use for new design

Picolo.net LLD2 Decoder

Two-channel low latency IP video decoder

At a glance
  • Display one or two 1080p30 HD video streams
  • 83ms wire-to-wire latency when used with the Picolo.net HD1, HD4 or HD8R encoder
  • 1080p60 monitor output
  • Robust fanless aluminum housing



Compare Where to buy


83ms wire-to-wire latency between Picolo.net encoder and Picolo.net LLD2 decoder
83ms wire-to-wire latency between Picolo.net encoder and Picolo.net LLD2 decoder

In the video world, the time lag between the instant a frame is captured and the instant that frame is displayed is called glass-to-glass latency. Research has shown that an operator’s ability to accurately perform precision manual tasks or surgical tasks decreases when glass-to-glass latency exceeds a 300 to 500 ms range. Euresys can now reduce the glass-to-glass latency to less than 100ms in full HD, in specific conditions with a dedicated decoder. Euresys has recently developed a low latency video encoder, designed for remote control of industrial processes in critical or hazardous areas. With the Picolo.net encoder, operators will be able to control machines, cranes or robots from afar with an improved response time, thanks to the advanced technologies implemented to stream full HD video over an IP network.


Developed with the support of the DG06 Technology Development Department
Developed with the support of the DG06 Technology Development Department


Decoding and display of two H.264 video streams provided by the Picolo.net HD4 or HD8R encoder over the network
Decoding and display of two H.264 video streams provided by the Picolo.net HD4 or HD8R encoder over the network


High-quality H.264 decoder

  • H.264 is efficient: Up to 40 cameras can stream low-latency video over a Gigabit Ethernet network
  • The highest quality HD video can be streamed, viewed, analyzed and stored anywhere on an IP network


Mechanical
Housing Fanless aluminum housing
Mounting
  • Desktop
  • Wall mounting base plate included
  • DIN rail mount clip included
  • VESA mount included
Dimensions L 200 mm x H 38.5 mm x D 247 mm
Weight 2.13 kg 4.70 lb
PCB connectors Side 1 (back)
  • 1x mini HDMI 1.4 A
  • 1x mini DP 1.2
  • 2x USB 3.0
  • 1x power supply jack
  • 1x Ethernet RJ-45 with link & activity LEDs
  • 1x Kensington security slot
Side 2 (front)
  • 1x power switch
  • 1x analog sound stereo jack 3.5 mm
  • 1x USB 3.0
  • 1x power OK blue LED
  • 1x activity orange LED
On-board video codec
Number of streams
  • Two RTP streams over UDP with H.264 video (RFC3984)
  • Session control protocol: RTSP (RFC2326)
Video decoders
  • H.264 (MPEG-4 Part 10)
  • Baseline, Main or High profile
  • Supporting CAVLC and CABAC entropy encoding up to level 4.1
Bitrate Up to 20 Mbps per stream
Video streams resolution
  • 1080p29.97
  • 1080p30
Latency
  • 83 ms wire to wire, with 1080p30 video
(With Picolo.net HD4 or Picolo.net HD8R encoder. Time measured from encoder input to decoder output)
Video processing
  • On Screen Display
  • ROI extraction
  • Single video display or Mosaic (Picture above Picture)
Streaming
Media transport protocol RTP streams over UDP with H.264 video (RFC3984)
Media transport control protocol RTSP (RFC2326)
RTP transport modalities RTP over UDP Unicast and over UDP MultiCast
Network
LAN interface 1 x Ethernet 10BASE-T/100BASE-TX/1000BASE-T, automatic speed negotiation
LAN connector 1 x RJ45 with link and activity LED indicators
Internet layer protocols IPv4
IP address allocation methods DHCP
Number of IP address/MAC address 1
User interface
Local interface Keyboard + monitor for easy installation, set up, testing and operation
System integration
Pan/Tilt/Zoom protocol Sony Visca with direct connection to the PTZ dome or PTZ camera via USB-to-RS232 adapter (not included)
Electrical
Supply voltage 19 V DC, 3.42 A (external power supply block)
Power connector
  • Compatible with a 5.5 mm/OD and 2.5 mm/ID plug
  • Inner contact +12-19 (±10%) V DC - shell GND. Maximum current rating 10 A
Power consumption Max. 15 W
Power status "Power OK" blue LED
Environmental conditions
Operating ambient air temperature 0 °C to +50 °C (TBC)
Storage ambient air temperature -40 °C to +60 °C (TBC)
Storage ambient air humidity 10% to 90% RH non-condensing
Certifications
Electromagnetic - EMC standards
  • European Council EMC Directive 2004/108/EC
  • United States FCC rule 47 CFR 15
EMC - Emission
  • EN 55022:2010 Class B
  • FCC 47 Part 15 Class B
EMC - Immunity
  • EN 55024:2010 Class B
Flammability PCB compliant with UL 94 V-0
RoHS European Union Directive 2011/65/EU (ROHS2)
REACH European Union Regulation 1907/2006
WEEE Must be disposed of separately from normal household waste and must be recycled according to local regulations
Ordering Information
Product code - Description
Included accessories Universal 110-240 AC to 19V DC 65W power supply for US, UK and EUR