|
|
|
|
|
|
For one Full, Medium or Base Camera Link® configuration camera
|
|
2 Mini Camera Link® SDR connectors
|
|
|
Types of cameras supported:
|
|
|
- Monochrome, Bayer CFA, and color RGB
|
|
|
- Progressive area-scan cameras
|
|
|
- Line-scan cameras
|
|
|
|
Continuous (web) or finite (page) acquisition modes
|
|
|
|
Extensive set of trigger modes to start the acquisition of pages
|
|
|
|
|
- |
Trigger decimation to reduce the trigger rate
|
|
|
|
Extensive set of line trigger modes to control and synchronize line-scan cameras
|
|
|
|
|
- |
Support of quadrature incremental motion encoders, with optional direction selection and backwards
motion cancellation
|
|
|
|
|
- |
Rate divider and rate converter to adjust the line rate while maintaining synchronization
with the motion encoder; non-integer rate conversion ratios are available for fine tuning
|
|
|
|
|
- |
Periodic generator to select a fixed line rate
|
|
|
- From 1-tap to 10-tap configuration cameras
|
|
|
- Full pixel clock range: from 20 MHz up to 85 MHz
|
|
|
Four fully-configurable upstream control lines
|
|
|
Serial communication interface (600 ˜ 230400 bit/s)
|
|
|
On-board processing
|
|
|
Image reconstruction:
tap re-ordering and horizontal/vertical flipping
|
|
|
Bayer CFA decoder
|
|
|
Look-up table transformation
|
|
|
- Monochrome operation with selectable output bit depth: 8 bits, 10 bits, 12 bits or 16 bit
|
|
|
- RGB and Bayer color operations with selectable output bit depth: 3 x 8 bits, 3 x 10 bits, 3 x 12 bits or 3 x 16 bits
|
|
High-performance 800 megabytes/sec DMA transfers into user allocated memory with 64-bit addressing
capability with image cropping capability
|
|
|
128MB on-board memory
|
|
|
Rich set of digital IO lines
|
|
|
|
|
|
|
|
|
I/O electrical style
|
I/O functions
|
|
- |
Two high-speed differential RS-422 inputs
|
|
- |
General purpose usage
|
|
- |
Four individually-isolated wide-voltage-range inputs
|
|
- |
Trigger source from external signals
|
|
- |
Four individually-isolated contact outputs
|
|
- |
EndTrigger sources from external signals
|
|
- |
+5V and + 12V power output with electronic fuse protection
|
|
- |
Line Trigger source from one or a pair of external signals
|
|
- |
1 external system IO connector
|
|
- |
Strobe output delivered through an isolated contact output
|
|
|
|
MultiCam driver
|
|
|
Seamless migration from previous generation of Grablink boards
|
|
|
Operates on 32- and 64-bit Windows and Linux operating systems
|
|
|
Camera Link® serial communication DLL or COM port emulation
|
|
|
Form factor
|
|
|
PCI Express x4, full-height, half-length
|
- Including 10-tap configuration cameras
